• Membrane Journal
• /
• v.32 no.2
• /
• pp.140-149
• /
• 2022

In this study, the conditions of low temperature and high pressure of biogas upgrading process using polysulfone membrane have been designed and tested to achieve the high recovery and efficiency corresponding to those of the highly selective polymeric materials. Polysulfone hollow fiber membrane with 4-component dope solution was spun via non-solvent induced phase separation. The hollow fiber membrane was mounted into a 1.5 inch housing. The effective area was 1.6 m², and its performance was examined in various operation temperatures and pressures. CO₂ and CH₄ permeances were 412 and 12.7 GPU at 20℃, and 280 and 3.6 GPU at -20℃, respectively, while the CO₂/CH₄ selectivity increased from 32.4 to 77.8. Single gas test was followed by the mixed gas experiments using single-stage and double stage where the membrane area ratio varied from 1:1 to 1:3. At the single-stage, CH₄ purity increased and the recovery decreased as the stage-cut increased. At the double stage, the area ratio of 1:3 showed the higher CH₄ recovery as decreasing the operation temperature at the same purity of CH₄ 97%. Finally, polysulfone hollow fiber membranes have yielded of both CH₄ purity and recovery of 97% at -20℃ and 16 barg.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.2
• /
• pp.105-113
• /
• 2022

Mulching film was produced by LDPE and LLDPE adding biomass byproducts and MA(maleic anhydride), talc/clay/CaO/CaCO₃. And also surveyed to tensile strength, elongation, TGA and DSC according to the UV irradiation time. The tensile strength and elongation showed 20 N/cm² and 5% after UV irradiation 100 hours, and those was nearly 0 N/cm² and 0% after 200 hours, respectively. TGA of film was showed to peak of polymer itself, and DSC was slightly higher than that of initial value. At the pilot scale test, we were able to see the differentiate of degradation between control and developed film after 12 weeks, and also torn off at several part of mulching film. The degradation of mulching film after growing corn showed similar to a pilot scale test. Above the results, the developed mulching film adding biomass will be to used for agricultural farming.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.3 no.1
• /
• pp.70-78
• /
• 2001

The objective of this study was to determine effects of corn germ meal(CGM) and condensed molasses fermentation solubles(CMS) as the replacement of rice bran on mycelial growth and density in various mushrooms. The results of this study showed that CGM and CMS might be utilized more efficiently than rice bran in culturing mushrooms. The results are as follows; 1. Mycelial growth of Pleurotus ostreatus was remarkably higher than that of control when the concentration of CGM and CMS was 10%, respectively. However, the mycelial density was lower than that of control. Thus, Considering the mycelial growth as well as density, it was found that 20% supplements of CGM and CMS resulted in the best with 78mm/10d and 71mm/10d, respectively. 2. Mycelial growth of Pleurotus eryngii in the treatment group of 10% CMS and 20% CGM showed 74mm/10d and 67mm/10d, respectively. This result tended to be equal or somewhat lower compared with that of control(74mm/10d). 3. Mycelial growth of Flamulina velutipes was 87mm/10d in the treatment of 10% CMS, 79mm/10d in the treatment of 20% CGM, which showed significantly higher than that of control(56mm/10d). When the contents of CGM and CMS were mixed with the amount of 10-30%, Thus, it was assumed that the quantity of mushrooms may increase with the supplements of CEM and CMS. 4. Mycelial growth of Lentinus edodes in the treatment group of 10-40% CMS and 10-30% CGM showed 58-52mm/10d and 56-49mm/10d, respectively. This result was significantly higher that control(47mm/10d). 5. When CMS and CGM were supplememted with the level of 10-30%, mycelial growth rate of Ganoderma lucidum showed 76-72mm/10d and 74-69mm/10d, respectively, which are higher than those of control.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.60-65
• /
• 2022

This study presents the carburization process for recycling sludge, which was formed during silicon wafer machining. The sludge used in the carburization process is a mixture of silicon and silicon carbide (SiC) with iron as an impurity, which originates from the machine. Additionally, the sludge contains cutting oil, a fluid with high viscosity. Therefore, the sludge was dried before carburization to remove organic matter. The dried sludge was washed by acid cleaning to remove the iron impurity and subsequently carburized by heat treatment under vacuum to form the SiC powder. The ratio of silicon to SiC in the sludge was varied depending on the sources and thus carbon content was adjusted by the ratio. With increasing SiC content, the carbon content required for SiC formation increased. It was demonstrated that substoichiometric SiC_x (x<1) was easily formed when the carbon content was insufficient. Therefore, excess carbon is required to obtain a pure SiC phase. Moreover, size reduction by high-energy milling had a beneficial effect on the suppression of SiC_x, forming the pure SiC phase.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.81-87
• /
• 2019

The investigation of mycelial growth for artificial cultivation in T. albuminosus determined that within PDA, YM, MEA medium, both KNCAF 9001 and 9002 strains showed the highest mycelial growth in MEA media with 89, 81 mm, respectively, followed by YM, PDA in respected order. Furthermore, optimal mycelial growth of 89 and 77 mm in 9001 and 9002, respectively, at 25 ℃. Mycelial growth rapidly decreased at 30 ℃, but it was confirmed that it survived at 40 ℃. At pH 6, mycelial growth was fast with growth of 89 and 88 mm for both 9001 and 9002, respectively. In the case of 9001, the addition of with cotton seed hull(80%) and rice bran (20%) each other resulted in maximum productivity of 99 mm/10 days. The result differed in order of corn cob(97 mm), oak sawdust(96 mm) and poplar sawdust(93 mm). Ultimately, the result confirmed that addition of rice bran in comparison to bran resulted in higher yield. Even with identical medium component, 9002 showed the same tendency as 9001 but its growth was relatively slower than 9001. The effect of mycelial growth on the moisture content of the medium was best at 101. 94 mm/10 days when the moisture content of 9001 and 9002 was 65%. Mycelial growth rate tended to be slower when the moisture content was higher or lower than 65%.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.57 no.2
• /
• pp.116-121
• /
• 2024

The meats of tuna Thunnus albacares and swordfish Xiphias gladius are ideal for fish patty production, offering high nutrition and other health benefits. Although red fish meat, including tuna, is added for cost-effectiveness, swordfish white meat is also used, as its aroma resembles that of market-sold beef patties. Here, we assessed the different blending ratios of tuna red meat and swordfish white meat (60:40, 40:60, 20:80, and 0:100) to find the optimal combination for fish patty production. Regarding color, the heated fish patties exhibited increased redness (a*) and yellowness (b*) compared with those of non-heated ones, with similar brightness (L*). The heated patties also scored higher concerning hardness, springiness, gumminess, and chewiness. A higher proportion of swordfish white meat resulted in a softer texture, particularly in patties with a ratio of 40% red meat to 60% white meat. Considering the results of the texture comparison analysis, it is recommended that the texture be improved by increasing the physical property "softness." Sensory evaluations revealed that the addition of white meat led to increased scores in terms of smell, beef taste, texture, and elasticity. These results suggest that swordfish white meat, with improved overall quality, is a suitable raw material for fish patties. Accordingly, the recommended ratio of 20% tuna red meat to 80% swordfish white meat is optimal for fish patty production.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.2
• /
• pp.121-127
• /
• 2024

In this study, the applicability of replacing DG(Desulfurized Gypsum) from oil refinery with CCCMs(Carbon dioxide Conversion Capture Materials) as an ALC(Auto-claved LIghtweight Concrete) raw material was examined, and basic properties of ALC was measured. The main chemical components of DG and CCCMs were CaO and SO₃, and an increase in LOI(Loss of ignition) due to mineral carbonation reaction was verified. The crystalline phases of CCCMs were CaCO₃, CaSO₄, Ca(OH)₂, and CaSO₄·2H₂O. When DG, a raw material for ALC production, was replaced with CCCMs, foaming height, pore shape, absolute dry gravity, and compressive strength results measured similar for all binders. In addition, the formation of tobermorite which is main crystalline phase of ALC was shown for all specimens in microstructural analysis.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.44 no.2
• /
• pp.106-112
• /
• 2024

The objective of this study was to compare the feeding effects of imported timothy hay, domestic Italian ryegrass silage (IRGS) and IRG dried by hot-air dry system (IRGHDS) under basic total mixed ration (bTMR) on rumination activity, milk production, and milk composition in lactating dairy cows. Eighteen Holstein dairy cows were divided into three groups: control (bTMR + imported timothy hay), treatment 1 (bTMR + IRGS) and treatment 2 (TMR + IRGHDS) groups. The study was conducted over a total period of 24 days, including a 10 days adaptation period and a 14 days main experimental period. The results indicate body weight was not significantly different between the three groups (p>0.05), and rumination time was significantly higher in the treatment 1 group compared with the control group (p<0.001). Milk fat, protein, and lactose were not significantly different between the three groups (p>0.05), however, somatic cell counts were significantly lower in the treatment 1 group compared with the control group (p<0.001). As a result of the economic feasibility analysis, it is expected that feeding TMR using IRGS and IRGHDS will increase profit by 402.8 won/day and 331.4 won/day per cow compared to imported timothy hay. Therefore, IRGS and IRGHDS can be used as substitutes for imported timothy hay in feeding lactating dairy cows.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.315-322
• /
• 2013

Purpose: To evaluate the axial displacement of implant-abutment assembly after cyclic loading in internal tapered connection system. Materials and methods: External butt-joint connection implant and internal tapered connection implant were connected with three types of abutment for cement-retained prostheses, i.e. external type abutment (Ext group), internal tapered 1-piece abutment (Int-1 group), and internal tapered 2-piece abutment (Int-2 group). For each group, 7 implants and abutments were used. The implantabutments assemblies were clamped into the implant holder for vertical loads. A dynamic cyclic loading was applied for $150{\pm}10N$ at a frequency of 4 Hz. The amount of axial displacement of the abutment into the implant was calculated at each cycle of 0, 5, 10, 50, 100, 1,000, 5,000, and 10,000. A repeated measures analysis of variance (ANOVA) for the overall effect of cyclic loading and the pattern analysis by linear mixed model were used for statistical analysis. Differences at P<.05 were considered statistically significant. Results: The mean axial displacement after 10,000 cycles were $0.714{\pm}0.488{\mu}m$ in Ext group, $5.286{\pm}1.604{\mu}m$ in Int-1 group, and $11.429{\pm}1.902{\mu}m$ in Int-2 group. In the pattern analysis, Int-1 and Int-2 group showed continuous axial displacement at 10,000 cycles. There was no declining pattern of axial displacement in the Ext group. Conclusion: The pattern of linear mixed model in Ext group showed no axial displacement. There were continuous axial displacements in abutment-implant assemblies in the Int-1 and Int-2 group at 10,000 cycles. More axial displacement was found in Int-2 group than in Int-1 group.

• Journal of Animal Science and Technology
• /
• v.46 no.3
• /
• pp.347-354
• /
• 2004

Four Holstein cows were used in a 4 ${\times}$ 4 Latin square experiment to study effects of fat sources on rumen metabolism and digestibility of nutrients. All cows were fed a total mixed diets containing 60% silage and 40% concentrate. The four concentrates were formulated to contain either Megalac(MEG), formaldehyde-treated whole linseed(LIN), a mixture (50 : 50, oil basis) of fish oil and formaldehyde-treated whole linseed(MIX), or no fat source in the concentrate but 500g per day of linseed oil being infused into the duodemm (OIL). The rumen pH was lowest in OIL among the treatments(P < 0.05), but ammonia N concentration in the rumen was not significantly different among the treatments. The differences of total VFA, acetate, propionate, iso-butyrate and iso-valerate concentrations were not significant among the treatments. While, butyrate and valerate were highest in OIL and lowest in MEG(P < 0.05 and P <0.01, respectively). In addition, A:P ratio was also highest in OIL and lowest in MEG(P < 0.05). As expected, intake of nutrients(DM, OM, NDF and ADF) was lowest in OIL among the treatments(P < 0.01). However, all nutrients flow to the duodenum, and digestion in the rumen and total tract were not significantly different among the treatments. Intake of N was highest in MEG, but lowest in OIL treatment(P < 0.01). Duodenal flow of total N, nonammonia N and microbial N was not significantly different across the treatments. In addition, microbial synthesis and ammonia N and total N digestibility were not affected by different dietary fat sources. The present results show that fermentative characteristic and microbial efficiency in the rumen, and nutrients digestibility in the rumen and total tract were not depressed by supplementation of as much as 6% dietary fat sources.