• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.04a
• /
• pp.417-426
• /
• 2000

정보 시스템 개발은 크게 계획, 분석, 설계, 구축의 네 단계로 이루어진다. 이중 사용자 요구사항을 파악하는 분석 단계는 시스템개발 수명주기에 있어 가장 큰 비중을 갖는다. 또한 수명주기의 초기 단계에서 발견되지 못한 결점은 개발이 진행될수록 수정하는데 많은 비용과 노력을 필요로 하게 되어 분석 결과물의 품질은 전체 시스템 품질에 큰 영향을 미치게 된다. 분석 단계의 주요 작업은 데이터 모델링과 프로세스 모델링이다. 이중 데이터 모델리을 위한 지식베이스 시스템 개발에 대한 노력은 기존 연구에서 수행되어 왔으나 프로세스 모델링을 위한 지식베이스 시스템에 대한 연구는 부족하다. 특히 최근 User Interaction이 많은 시스템이 점점 증가하고 있는 추세에 적합한 프로세스 모델링 방법과 지식베이스에 대한 연구가 필요하다.이 연구에서는 사용자 상호작용이 많은 시스템 환경에서의 프로세스 모델링을 위한 절차를 제안하고, 제안된 절차를 효과적으로 지원하고 결과물의 품질을 보증하기 위한 지식베이스 시스템을 구축한다. 모델은 다음의 주요 작업들로 구성된다: 이벤트 분석, 프로세스 분석, 이벤트/프로세스 상호작용 분석. 이벤트 분석은 영향을 주는 이벤트와 그로 인해 수행되어야 하는 업무 절차(Response)를 파악한다. 프로세스 분석은 이벤트 분석과는 독립적으로 수행되며 상위 수준의 업무부터 최하위 수준의 프로세스까지 도출한다. 이벤트/프로세스 상호작용 분석은 이벤트와 프로세스의 분석 결과를 상호 검증하기 위하여 실시된다. 제안된 프로세스 모델링 방법을 지원하기 위한 지식베이스 시스템을 웹 환경에서 구현하였다. 구현된 지능형 robot과 spider 등으로 구성된, 신뢰성 있고 지능적인 MP3 검색 엔진 지원 시스템의 설계와 구현 결과 그리고 성능 등을 종합적으로 요약한다.실어증 환자들은 화시적 대명사를 조응적 대명사보다 더 잘 처리하는 동일한 결과를 보였다. 이러한 실험 결과들은 실어증 환자들이 뇌손상으로 인해 문법적 언어처리에는 어려움을 보이지만 비언어적인, 세상 지식과 관련된 화시적 대명사의 처리는 가능할 것이라는 가설을 뒷받침 해준다. 또한 이러한 실험 결과를 통해 대명사의 기능적인 측면에서 화시와 조응의 처리가 구분되어 있음을 보여준다.l mechanism is concentrate on only the reaction zone. As strain rate and CO2 quantity increase, NO production is remarkably augmented.our 10%를 대용한 것이 무첨가한 것보다 많이 단단해졌음을 알 수 있었다. 혼합중의 반죽의 조사형 전자현미경 관찰로 amarans flour로 대체한 gluten이 단단해졌음을 알수 있었다. 유화제 stearly 칼슘, 혹은 hemicellulase를 amarans 10% 대체한 밀가루에 첨가하면 확연히 비용적을 증대시킬 수 있다는 사실을 알 수 있었다. quinoa는 명아주과 Chenopodium에 속하고 페루, 볼리비아 등의 고산지에서 재배 되어지는 것을 시료로 사용하였다. quinoa 분말은 중량의 5-20%을 quinoa를 대체하고 더욱이 분말중량에 대하여 0-200ppm의 lipase를 lipid(밀가루의 2-3배)에 대

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.30-36
• /
• 1999

This paper describes the relationship between the bending strength properties of sloped finger-jointed woods and the acoustic emissions (AEs) generated during the test. Pinus densiflora pieces were cut in sloped-finger types and glued with four kinds of adhesives (polyvinyl acetate, polyvinyl-aeryl, oilic urethane and resorcinol-phenol resin). The results were as follows: The lower the bending strength(load) was, the earlier the generation time of AE event count got and the higher the increasing rate of AE event count became in the sloped finger-jointed specimens bonded with polyvinyl acetate and oilic urethane resin adhesives. Therefore, the slope from load-AE cumulative event count curve was very steep. The AE event count for resorcinol-phenol resin adhesive obtained even from low load level was abundant. The AE event count continuously increased as load increased and the event count was much more than one in the other conditions. The slope from load-AE cumulative event count curve was very gentle compared with other conditions. The patterns of AE event count and count were very similar. The relationship between the MOR and the AE parameter from load and AE cumulative event count in the early stage of the sloped finger-jointed specimens bonded with polyvinyl acetate, oilic urethane and resorcinol-phenol resin adhesives was much greater than that between the MOE and the MOR. Therefore, the AE signals obtained during bending test are useful for estimating the strength of sloped finger-jointed specimens.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.5
• /
• pp.287-293
• /
• 2005

In this work, to develop soil inoculant which maintains stable viable cells and normalized quality, studies on micro-encapsulation with bacteria and yeast cells were performed by investigating materials and methods for micro-encapsulation as well as variation and stability of encapsulated cells. Preparation of capsule was conducted by application of extrusion system using micro-nozzle and peristaltic pump. K-carragenan and Na-alginate were selected as best carrier for gelation among K-carageenan, Na-alginate, locust bean gum, cellulose acetate phthalate (CAP), chitosan and gelatin tested. Comparing the gels prepared with Bacillus sp. KSIA-9 and carriers of 1.5% concentration, although viable cell of K-carragenan and Na-alginate was six times higher than those of other, Na-alginate was finally selected as carrier for gelation because it is seven times cheaper than K-carragenan. The gel of 1.5% Na-alginate was also observed to have the best morphology with circular hardness polymatrix and highest viable cell. When investigating the stability of encapsulated cells and the stabilizer effect, free cells were almost dead within 30 or 40 days whereas encapsulated cells decreased in 10% after 30 days and 15-30% even after 120 days. As stabilizer for maintaining viable cell, both 1% starch and zeolite appeared to possess the level of 70-80% cell for bacteria and yeast until after 120 days.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.4
• /
• pp.221-226
• /
• 1973

In order to investigate the silica effect of insufficient wollastonite to the official standard (above than 15% of suluble silica (N/2 HCl) on rice plant as silica fertilizer, 9 kinds of wollastonites and slag were adopted to examine the amount of silica absorbed by rice straw during growing period, and soluble silica of wollastonites extracted by 7 buffer solutions were compared with silica content in rice straw. Crystalls of ingredient in wollastonite ores were identified by X-ray diffractometer. The results were that silica content of rice plant at growing stages were increased as same ratio of soluble silica. content in wollastonite. Wollastonite containing more than 10% of souble silica (N/2 HCl) could be applied as fertilizer because absorbed amount of silica by rice plant from them are higher than from slag which contained 30% of soluble silica. Wollastonite powder mixed with impure ores in which soluble silica could not be extracted had the same effect on silica absorption of straw as wollastonite powder which contained conformable amount of soluble silica. The soluble silica of wollastonite extracted by buffer solutions (2% citric acid, N. NaOAc, N. $NH_4OAc$, Petermann solution, 0.1M. EDTA, and Hot water) had high significant relation to silica content in rice straw, but soluble silica extracted N/2 hydrochloric acid solutilon, also, had deep relation to them in rice straw. The adequate solution to extract silica from wollastonites is N/2 hydrochloric acid solution because its extracted silia amount is much higher than other solution (about one hundred times) and can be determined by gravimetric analysis. X-ray diffraction pattern would identify qualitatively purity of wollastonite, and large amount of soluble silica was extracted from wollastonite which was appeared to be weathered.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.29-40
• /
• 2005

According as base of digital hologram has been magnified, discussion of compression technology is expected as a international standard which defines the compression technique of 3D image and video has been progressed in form of 3DAV which is a part of MPEG. As we can identify in case of 3DAV, the coding technique has high possibility to be formed into the hybrid type which is a merged, refined, or mixid with the various previous technique. Therefore, we wish to present the relationship between various image/video coding techniques and digital hologram In this paper, we propose an efficient coding method of digital hologram using standard compression tools for video and image. At first, we convert fringe patterns into video data using a principle of CGH(Computer Generated Hologram), and then encode it. In this research, we propose a compression algorithm is made up of various method such as pre-processing for transform, local segmentation with global information of object image, frequency transform for coding, scanning to make fringe to video stream, classification of coefficients, and hybrid video coding. Finally the proposed hybrid compression algorithm is all of these methods. The tool for still image coding is JPEG2000, and the toots for video coding include various international compression algorithm such as MPEG-2, MPEG-4, and H.264 and various lossless compression algorithm. The proposed algorithm illustrated that it have better properties for reconstruction than the previous researches on far greater compression rate above from four times to eight times as much. Therefore we expect that the proposed technique for digital hologram coding is to be a good preceding research.