• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.117-122
• /
• 2011

Asphalt concrete pavement can be widely seen on urban streets, highways, parking lots, and bike trails. Asphalt concrete pavement is relatively temperature sensitive materials due to the viscoelastic behavior, which can be defined as flexible performance in summer and rigid performance in winter. In terms of maintenance, it can be fixed quite easily if damaged. In addition, asphalt concrete pavement is generally found to be black and grey in color. However, several colors can be adopted to change the appearance of plain old boring, black and grey. Generally, there are two types of color systems in hot mix asphalt concrete materials. One system uses colored cementitious material that is applied to pavement surface through coating the surface of the asphalt pavement. The major disadvantage to this system requires a careful skill set to be used on the construction site in order to prevent taking off the cementitious material. The other coloring system colors the asphalt hot mixtures through using color additives. The main advantage to this system is that the asphalt pavement layer is colored using the same techniques that are already used in paving. The disadvantage is that the colors are limited to mainly reds and browns. In this study, a suggested color additive was evaluated, based on rutting, moisture sensitivity, and fatigue cracking performance.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2008

As conventional oil and gas reservoirs become depleted, interests for oil sands has rapidly increased in the last decade. Oil sands are mixture of bitumen, water, and host sediments of sand and clay. Most oil sand is unconsolidated sand that is held together by bitumen. Bitumen has hydrocarbon in situ viscosity of >10,000 centipoises (cP) at reservoir condition and has API gravity between $8-14^{\circ}$. The largest oil sand deposits are in Alberta and Saskatchewan, Canada. The reverves are approximated at 1.7 trillion barrels of initial oil-in-place and 173 billion barrels of remaining established reserves. Alberta has a number of oil sands deposits which are grouped into three oil sand development areas - the Athabasca, Cold Lake, and Peace River, with the largest current bitumen production from Athabasca. Principal oil sands deposits consist of the McMurray Fm and Wabiskaw Mbr in Athabasca area, the Gething and Bluesky formations in Peace River area, and relatively thin multi-reservoir deposits of McMurray, Clearwater, and Grand Rapid formations in Cold Lake area. The reservoir sediments were deposited in the foreland basin (Western Canada Sedimentary Basin) formed by collision between the Pacific and North America plates and the subsequent thrusting movements in the Mesozoic. The deposits are underlain by basement rocks of Paleozoic carbonates with highly variable topography. The oil sands deposits were formed during the Early Cretaceous transgression which occurred along the Cretaceous Interior Seaway in North America. The oil-sands-hosting McMurray and Wabiskaw deposits in the Athabasca area consist of the lower fluvial and the upper estuarine-offshore sediments, reflecting the broad and overall transgression. The deposits are characterized by facies heterogeneity of channelized reservoir sands and non-reservoir muds. Main reservoir bodies of the McMurray Formation are fluvial and estuarine channel-point bar complexes which are interbedded with fine-grained deposits formed in floodplain, tidal flat, and estuarine bay. The Wabiskaw deposits (basal member of the Clearwater Formation) commonly comprise sheet-shaped offshore muds and sands, but occasionally show deep-incision into the McMurray deposits, forming channelized reservoir sand bodies of oil sands. In Canada, bitumen of oil sands deposits is produced by surface mining or in-situ thermal recovery processes. Bitumen sands recovered by surface mining are changed into synthetic crude oil through extraction and upgrading processes. On the other hand, bitumen produced by in-situ thermal recovery is transported to refinery only through bitumen blending process. The in-situ thermal recovery technology is represented by Steam-Assisted Gravity Drainage and Cyclic Steam Stimulation. These technologies are based on steam injection into bitumen sand reservoirs for increase in reservoir in-situ temperature and in bitumen mobility. In oil sands reservoirs, efficiency for steam propagation is controlled mainly by reservoir geology. Accordingly, understanding of geological factors and characteristics of oil sands reservoir deposits is prerequisite for well-designed development planning and effective bitumen production. As significant geological factors and characteristics in oil sands reservoir deposits, this study suggests (1) pay of bitumen sands and connectivity, (2) bitumen content and saturation, (3) geologic structure, (4) distribution of mud baffles and plugs, (5) thickness and lateral continuity of mud interbeds, (6) distribution of water-saturated sands, (7) distribution of gas-saturated sands, (8) direction of lateral accretion of point bar, (9) distribution of diagenetic layers and nodules, and (10) texture and fabric change within reservoir sand body.

• Journal of Periodontal and Implant Science
• /
• v.34 no.1
• /
• pp.93-100
• /
• 2004

많은 연구들에서 hMSC를 얻기 위해 centrifugation, fluoroscence activated cell sorter(FACS), magnetic activated cell sorter(MACS)가 이용되어져 왔다. 그러나 centrifugation만을 이용한 경우 순도가 떨어지며 FACS나 MACS의 경우에는 비용, 시간이 많이 드는 단점이 있다. 따라서 이 연구에서는 antibody cocktail을 이용하여 hMSC를 좀더 쉽게 얻어내는 방법에 대해 알아보았다. 사람의 골반에서 12G의 바늘을 이용하여 골수를 흡입한 후 heparin이 들어있는 시험관에 넣고 처리과정을 시행하기 전에 냉장고에 보관하며 가능한 한 빨리 처리 과정을 실시한다. 얻은 골수에 적당량의 RosetteSep( Stemcell Technologies)을 첨가한 후 실온에서 20분간 반응시킨다. 그 후 적당량의 Ficoll-paque위에 골수와 RosetteSep의 혼합물을 섞이지 않게 올리고 원심분리를 이용하여 원하는 세포층을 얻어낸다. 이 세포층을 따로 분리한 뒤 배양한다. 배양 시 세포가 80%이상 차기 전에 계속 passage를 시행하며 배양한다. 이는 세포가 밀도가 높아져 원치 않는 세포로 분화되는 것을 막기 위함이다. 배양된 세포가 다양한 분화능력을 가지고 있는지 알아보기 위해 세 가지로 분화를 유도하였다. 적절한 배지와 적절한 환경에서 배양함으로써 얻어진 세포를 osteoblast, chondroblast, adipocyte로 분화를 유도하였다. 분화된 세포가 원하는 형질의 세포로 분화되었는지를 확인하기 위하여 osteoblast의 경우 alizarin red staining, alkaline phosphatase activity, chondroblast의 경우 toluidine blue staining, adipocyte의 경우 Oil-Red-O staining으로 염색하여 분화를 확인하였다. 분리해낸 세포는 각각 세 가지 세포로 분화가 되었으며 이는 RosetteSep이 hMSC를 성공적으로 분리해냈다는 것을 보여준다. 그러나 모든 세포가 분화를 보이지는 않았으며 따라서 hMSC의 순도를 높이기 위한 연구가 더 필요하다. RosetteSep을 이용하면 다른 방법들 보다 쉽게 hMSC를 얻을 수 있으나 기존의 방법과 순도의 측면에서 더 비교할 필요가 있다.

• The Korean Journal of Petroleum Geology
• /
• v.7 no.1_2 s.8
• /
• pp.13-18
• /
• 1999

Methane hydrate is an ice-like solid material and it has a structure which water molecules enclose gas molecules. For low temperature and high pressure, hydrocarbon gas forms hydrate and due to this condition, it is existed in the arctic region or deep sea. Presently, the amount of methane hydrate is unpredictable, but it is assumed that the amount will be enormous. For this reason, it is expected that it will play a major role as natural gas resources in the future. However, the production technologies are stayed on the low level and the economical technology was not developed yet. Also, emission of natural gas from methane hydrate will cause global warming and thus it is considered as a critical environmental problem. In this paper, the state of the art of the production technologies and environmental effects of methane hydrate were summarized.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.20-25
• /
• 2010

An integrated Mach-Zehnder interferometric sensor operating at 632.8 nm was designed and fabricated by the technology of planar rib waveguides. Rib waveguide based on silica system ($SiO_2-SiO_xN_y-SiO_2$) was geometrically designed to have single mode operation and high sensitivity. It was structured by semiconductor fabrication processes such as thin film deposition, photolithography, and RIE (Reactive Ion Etching). With the power observation, propagation loss measurement by cut-back method showed about 4.82 dB/cm for rib waveguides. Additionally the chromium mask process for an etch stop was employed to solve the core damaging problem in patterning the sensing zone on the chip. Refractive index measurement of water/ethanol mixture with this device finally showed a sensitivity of about $\pi$/($4.04{\times}10^{-3}$).

• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.55-65
• /
• 2014

On this studyed, the Wibongsa BoGwangMyungJun BaekEuiKwanEum wall-painting was conservation of Scientific research ahead. This study carried out Grain size analysis, SEM-EDS, XRD, P-XRF, FT-IR and ultrasonic exploration for wall-painting. As a result, walls layer used to mineral particles size was mixing the medium-texture and fine texture. painting layers pigments used to base paintings was ocher, white pigments was hobun, red pigments was suckganju, green pigments was suckruk. Also BackuiKannon wall-painting walls damage reason of that was long-term physical shocks. painting layers damage was include detachment or powders. it is affected by temperature and humidity. Therefore in the future conservation of wall-paintings through scientific analysis based on such data, conservation processing is performed through the preservation and enhance the stability of the paintings as a basis for the conservation of management can be utilized.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.216-221
• /
• 2017

Reducing optical reflection in the visible light range, in order to increase the share of transmitted light and avoid the formation of ghost images in imaging, is important for polymer lens applications. In this study, polymer lenses with refractive indices of n=1.56, 1.60, and 1.67 were fabricated by the injection-molding method with a polymer lens monomer, dibutyltin dichloride as the catalyst and an alkyl phosphoric ester as the release agent. To investigate their anti-reflection (AR) effects, various AR coating structures, viz. a multi-layer AR coating structure, tri-layer AR coating structure with a discrete approximation Gaussian gradient-index profile, and tri-layer AR coating structure with a quarter-wavelength approximation, were designed and coated on the polymer lens by an E-beam evaporation system. The optical properties of the polymer lenses were characterized by UV-visible spectrometry. The material properties of the thin films, refractive index and surface roughness, were analyzed by ellipsometry and AFM, respectively. The most effective AR coating structure of the polymer lens with low refractive index, n=1.56, was the both side coating of multi-layer AR coating structure. However, both side coating of the tri-layered discrete approximation Gaussian gradient-index profile AR coating structure gave comparable results to the both side coating of the multi-layer AR coating structure for the polymer lens with a high refractive index of n=1.67.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.84-87
• /
• 2010

Copper-indium-diselenide (CIS) particles were prepared by the electrochemical reduction from the mixture solution of corresponding ion compounds. The prepared CIS was used as an insertion layer or a blending component in the organic photovoltaic bulk heterojunction cells composed of poly(3-octylthiophene) and fullerene. The increase of CIS content resulted in the rapid decrease of the open-circuit voltage as well as short-circuit current. The photovoltaic parameters were analyzed in relation to the structures, composition, and morphology of the photovoltaic blends.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.1
• /
• pp.43-51
• /
• 1983

The fatigue failure envelopes for the prediction of the fatigue life of asphalt pavements were obtained from the results of laboratory fatigue test for asphalt mixture. The envelopes did not depend on the experimental temperature and the number of loading, and varied with the types of asphalts. In the case of dense graded asphalt concrete, the envelopes formed a single curve regardless of the penetration of the asphalt. On the other hand, the method for the fatigue life prediction was presented based on the envelopes obtained and the triple layered elastic theory developed by Burmister.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.363-366
• /
• 2011

Mixing and combustion experiments with a vent slot mixer were performed in Mach 2 supersonic wind tunnel. Helium and hydrogen gases each were used for the mixing and the combustion experiment with a plasma jet (PJ) torch. The vent slot mixer holds plenty of fuel in the downstream mixing region, even though the fuel is transversely injected. In case of the combustion, the injected fuel is ignited by the PJ torch, and then unburned mixture is burned by shock-induced combustion downstream. Thermal choking in the combustor leads to shock trains in the isolator, causing the unstable combustion.