• Elastomers and Composites
• /
• v.41 no.2
• /
• pp.97-107
• /
• 2006

The recycled polyethylene composites with various ratio of ground waste tire powder were manufactured by using a fully intermeshing co-rotating twin screw extruder for the reuse of waste tire scrap. In this investigation, the ground waste tire powders (GWTP) were blended with virgin HDPE and recycled polyethylene in the weight ratio of 0 to 50 wt.%. Mechanical properties such as tensile strength, elongation at break and impact strength were measured by using ASTM standard. The experimental results for the various composite showed that the tensile strength of composites decreased with increasing GWTP ratio, while elongation at break increased with the amounts of GWTP. On the other hand, the impact strength for the three kinds of composites showed maximum at the 30 wt.% of GWTP and then decreased. Morphology of the fracture surface tends to be rough with increasing waste tire powder content. Rheological properties were investigated by measuring the shear viscosity against shear rates and softening temperatures. They showed that melt viscosity of rubber composites in this study subsequently increased with increasing GWTP content as a result of increase of flow resistance against external stress and followed a Power-law behavior.

• Elastomers and Composites
• /
• v.39 no.2
• /
• pp.131-141
• /
• 2004

The recycling of waste XLPE(crosslinked polyethylene), which is a major source of scraps from high voltage power transmission cables, has been discussed. The waste XLPE scraps were ground into fine powder with various sizes from less than $100{\mu}m$ up to about $1000{\mu}m$ using two types of tailor-made pulverizers. The compounds were prepared in a modular intermeshing co-rotating twin screw extruder at various conditions such as different compositions, types and powder sizes of waste XLPE, screw configurations and various polymer matrices (LDPE, HDPE, PP, PS). The mechanical and rheological properties and the fracture surface or the compounds were investigated. It was found that an improved impact strength was obtained from the compound with white XLPE powder pulverized from the scraps without outer/inner semi-conductive layers. Generally, the impact strength increases with the content of XLPE but decreases with the size of XLPE. Especially for LDPE, the extrusion was possible up to 80 wt% loading of XLPE. Also, the impact strength increases with the number of kneading disc blocks in the given screw configurations. The melt viscosity of the compounds increases with increasing XLPE loading. However, the higher shear thinning behavior of the compounds at common shear rates implies proper processibility of the compounds. In addition, the impact strength for other polymer matrices used increases with XLPE and it is noticeable that the impact strength of PS/XLPE (80/20 wt%) compound was improved twice that of pure PS.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.525-530
• /
• 2005

Maxillary median diastema is the term used when there is spacing between maxillary central incisors. The space between maxillary central incisors are often observed during ugly duckling stage. In most of the cases, as maxillary permanent canines erupt, it gradually disappears. Maxillary median diastema needs to be treated when there is up to 2mm of space between the incisors even after eruption of permanent canines or when there is 3mm of space, at least, before the eruption of the canines. Particulary, for the latter case, orthodontic treatment is recommended because not only the esthetic point of view but also to regain the eruption space for maxillary lateral incisors and canines. The appliance used for orthodontic treatment are removable appliances, using finger spring and etc, and fixed appliances, using rubber elastics and coil spring. If rubber band alone was used to treat median diastema without any other appliance such as band, tube or bracket, it will gradually move downward along the root surface. Then it will destroy the peridontal ligament and causes tooth mobility, extrusion, and avulsion. This report presents cases of damaged tooth due to improper use of rubber band when treating maxillary median diastema.

• Journal of Korea Water Resources Association
• /
• v.39 no.2 s.163
• /
• pp.99-108
• /
• 2006

To describe the behavior of suspended-sediment particles in turbulent open-channel flows, the advection-diffusion equation or its simplified form has been used. Though this equation was derived upon several assumptions, only a few studies tried to evaluate the limit of the assumptions. The reason is that it is very difficult to measure turbulence in open-channel flows and to discriminate the velocities of water and sediment particles. The present study aims to measure the velocity profiles of water and sediment particles in open-channel flows by using PTV (Particle Tracking Velocimetry), a kind of PIV (Particle Image Velocimetry). The measured results showed that sediment particles moved slower than water tracers did in the outer region. In the present study, the amount of velocity-lag reached about $5\%$ of the mom flow velocity and the position of the maximum velocity-lag was $g/h\approx0.05\;(g^{+}=30\~50)$ The main cause of the velocity-lag of sediment particles seems that the sediment particles have larger density than water has. On the other hand, in the viscous sublayer, sediment particle has a larger velocity than water tracers. The reason of the inversion of velocity-lag may be due to the no-sleep condition of water at the solid boundaries.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2000

Fifty-seven extracts from flower, leaf and stem of Agastache rugosa O. Kuntze were prepared by varing extraction conditions: solvents (hot water, ethanol and NaCl solution); temp.$(60,\;80\;and\;100^{\circ}C)$ and solvent ratios (10 to 35 times per material). Lipid content of leaf was 9.54% and protein content of the flower where the essential amino acids were most abundant among all parts was 16.8%. Among six minerals (Na. Ca, Fe, P, K and Mg) detected from all parts of the plant, the content of K was the highest. Extraction yield rated higher in odor of water, ethanol and NaCl solution, respectively and the extractions reached eqilibrium in about 15 to 20 min, regardless of extraction conditions. pH values of all extracted solvents maintained neutral upon extraction and a few free sugars in forms of glucose and fructose were detected from ethanol extracts. Colors and organoleptic characteristics of the extracts which determine the properties of final products varied with extraction conditions.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.198-207
• /
• 2007

The purpose of this study was to investigate the effect of calcium hydroxide on dentin bonding strength of various dentin bonding systems as a function of time in composite resin restoration. Dentin adhesives used in this study were Scotchbond Multipurpose, Single Bond, SE Bond and Prompt L-Pop. Flat dentin surfaces adjacent to pulp chamber were created, then $Ca(OH)_2$ and saline were mixed and applied on dentin surface of experimental group, then IRM was used to cover the mixture on dentin surface and the specimens were stored at $36.5^{\circ}C$ for experiment period (7 days, 30 days). After removing IRM and $Ca(OH)_2$, each dentin adhesives were treated on dentin surfaces. Composite resin (Z-250, 3M) was placed with S mm height and was light-cured for 20 seconds. After stored in distilled water for 24 hours, each dentin-composite bonded spicemen was embedded in epoxy resin and sectioned into $1.0\times1.0mm^2$ cross section composite-dentin beams. Specimen was mounted on zig of Universal testing machine and ${\mu}TBS$ test was performed. SEM analysis was performed to examine the fractured surfaces. The results suggested that applying calcium hydroxide did not show significant difference in dentin bonding strength.

• Journal of KIISE:Software and Applications
• /
• v.31 no.4
• /
• pp.447-456
• /
• 2004

Information extraction is a process of recognizing and fetching particular information fragments from a document. In order to extract information uniformly from many heterogeneous information sources, it is necessary to produce information extraction rules called a wrapper for each source. Previous methods of information extraction can be categorized into manual wrapper generation and automatic wrapper generation. In the manual method, since the wrapper is manually generated by a human expert who analyzes documents and writes rules, the precision of the wrapper is very high whereas it reveals problems in scalability and efficiency In the automatic method, the agent program analyzes a set of example documents and produces a wrapper through learning. Although it is very scalable, this method has difficulty in generating correct rules per se, and also the generated rules are sometimes unreliable. This paper tries to combine both manual and automatic methods by proposing a new method of learning information extraction rules. We adopt the scheme of supervised learning in which a user-interface agent is designed to get information from the user regarding what to extract from a document, and eventually XML-based information extraction rules are generated through learning according to these inputs. The interface agent is used not only to generate new extraction rules but also to modify and extend existing ones to enhance the precision and the recall measures of the extraction system. We have done a series of experiments to test the system, and the results are very promising. We hope that our system can be applied to practical systems such as information-mediator agents.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.4
• /
• pp.413-420
• /
• 1994

Dynamics of the river plume is a very complicated non-linear problem with the free boundary changing in time and space. Mixing with the ambient water through the boundary makes the problem more complicated. In this paper we reduced 3-dimensional problem into 1-dimensional one by using the integral analysis method. Basic equations have been integrated over the lateral and vertical variations. For these integrations we adopted the well-established assumption that the flow-axis component of plume velocity and the density difference of the plume with the ambient water have Gaussian distributions in directions which are perpendicular to the flow-axis of the plume. We also used the result of our previous study on the lateral spreading velocity of the plume derived under the same assumption. And entrainment was included as a mixing process. The resultant 1-dimensional equations were solved by Runge-Kutta numerical method. Consequently, comparatively easy method of numerical analysis is presented for the 3-dimensional river plume. The method can also be used for the analysis of the thermal plume of cooling water of power plants.

• Microbiology and Biotechnology Letters
• /
• v.32 no.2
• /
• pp.184-189
• /
• 2004

Rice wine cake (RWC) is the solid waste obtained after rice wine fermentation. For the mass production of the spores of yeast Saccharomyces from RWC, the optimum pretreatment condition of RWC, the optimum composition of culture medium, and the optimum culture condition were examined. For sporulation, yeast cells were grown in the pre sporulation medium (PSM), transferred into sporulation medium (SM) containing 1 % potassium acetate, and incubated in a rotary shaking incubator at $25^{\circ}C$ for 4 days. The supernatant of the mixture of RWC and water was used as the presporulation medium (PSM). The optimum temperature and time for the pre-incubation of the mixture of RWC and water (1:2) to obtain maximum sporulation yield were $V^{\circ}C$ and 24 hr, respectively, and optimum culture time in PSM was 48 hr. Using these optimum conditions, the asci number obtained was 0.72$ 1.06${\times}$10^{8}$$m\ell$. The addition of wheat coat koji into SM increased the final number of asci to beTEX>$10^{8}$ $m\ell$. Spores were formed in the SM with the initial pH of 7-11, but no spores were formed in the SM with the initial pH of 5. To save the time and effort to pretreat the RWC, 2% and 0.5% RWC without any pretreatment were directly added into PSM containing 1 % brown sugar and SM, respectively, and the maximum asci number of $1.27${\times}$10^{8}$ /$m\ell$ was obtained.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1083-1091
• /
• 2000

The objective of this study is to develop effective and economical treatment processes for the removal of non-biodegradable organics by reusing the sludge generated from Fenton's Oxidation Process. It was found that about 50% of coagulants and 50% of catalyst can be reduced by reusing the sludge generated from Fenton's Oxidation Process. It was also found that the amount of sludge generation can be reduced in coagulation process and Fenton's Oxidation Process. From the results of bench-scale test, it was found that the average removal efficiency increased to 8.5% and the amount of sludge generation was reduced up to 35% by reusing the sludge as coagulant. The average organic removal efficiency increased to 5.3% and the amount of sludge generation was reduced up to 14% by reusing the sludge as catalyst in Fenton's Oxidation. It can be concluded that the reuse of sludge generated from Fenton's Oxidation Process would be reduced cost of chemical consumption and Fenton's sludge treatment.