• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.83-89
• /
• 2008

In order to evaluate the oxidation stability, chemical compounds, and sensory for the garlic-salt laver, we prepared the garlic-salt laver added with different levels of salt and garlic power. The lipid per oxidation of garlic-salt laver was monitored by measuring the formation of 2-thiobarbituric acid reactive substances (TBARS). In addition, the general chemical compounds of laver with garlic-salt were determined by moisture, crude lipid ash, and protein. The major tocopherol compounds of laver with garlic-salt were measured using HPLC system. The contents of ${\alpha}$-tocopherol decreased with time, in contrast to ${\gamma}$-tocopherol which increased with time. The lipid profiles of laver with garlic-salt were high in linoleic acid although they did not change with time. Formation of TBARS of laver increased in control but did not increase in laver with garlic-salt. After 12 weeks, laver with 33% garlic-salt showed strong inhibition effect on TBARS formation. The sensory evaluation of laver with garlic-salt were tested. The results seem to indicate that laver with 33% garlic-salt can be used as a good ratio.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.28-34
• /
• 2012

Various feature extraction algorithms are widely applied to real-time image processing applications for extracting significant features from images. Feature extraction algorithms are mostly combined with image processing algorithms mostly for image tracking and recognition. Feature extraction function is used to supply feature information to the other image processing algorithms and it is mainly implemented in a preprocessing stage. Nowadays, image processing applications are faced with embedded system implementation for a real-time processing. In order to satisfy this requirement, it is necessary to reduce execution time so as to improve the performance. Reducing the time for executing a feature extraction function dose not only extend the execution time for the other image processing algorithms, but it also helps satisfy a real-time requirement. This paper explains FAST (Feature from Accelerated Segment Test algorithm) of E. Rosten and presents FPGA-based embedded hardware accelerator architecture. The proposed acceleration scheme can be implemented by using approximately 2,217 Flip Flops, 5,034 LUTs, 2,833 Slices, and 18 Block RAMs in the Xilinx Vertex IV FPGA. In the Modelsim - based simulation result, the proposed hardware accelerator takes 3.06 ms to extract 954 features from a image with $640{\times}480$ pixels and this result shows the cost effectiveness of the propose scheme.

• Journal of the Korean Chemical Society
• /
• v.18 no.5
• /
• pp.329-340
• /
• 1974

Sulfadiazine, $C_{10}H_{10}N_4O_2S$, forms monoclinic crystals of space group $P21}c$ from a mixture of acetone and ethanol with $a=13.71{\pm}0.04,\;b=5.84{\pm}0.03,\;c=15.11{\pm}0.05{\AA},\;{\beta}=115.0{\pm}0.3^{\circ}$, and four molecules per cell. Three dimensional photographic data were collected with $CuK\alpha$ radiation. The structure was determined using Patterson and Fourier synthesis methods and refined by block diagonal least-squares methods with isotropic thermal parameter for all non-hydrogen atoms. The final R value was 0.15 for the 1517 observed independent reflections. The dihedral angle between the planes through the benzene ring and the pyrimidine ring is $76^{\circ}$. The conformational angle formed by the projection of the S-C(5) bond with that of N(1)-C(1) where the projection is taken along the S-N(1) bond is $77^{\circ}$. The imino nitrogen atom, N(1), and pyrimidine nitrogen atom, N(3), form intermolecular $N-H{\cdots}N$ hydrogen bond between the molecules related by center of symmetry. Amino nitrogen atom, N(4), forms two intermolecular $N-H{\cdots}O$ hydrogen bonds, with O(1) and O(2) atoms of different molecules separated by b. A two dimensional network of hydrogen bonds form infinite molecular sheets parallel to the (100) plane. Adjacent sheets are bound together by van der Waals forces.

• Composites Research
• /
• v.28 no.4
• /
• pp.155-161
• /
• 2015

A composite structure was fabricated with embedded impact detection capabilities for applications in Structural Health Monitoring (SHM). By embedding sensor functionality in the composite, the structure can successfully perform impact localization in real time. Smart resin, composed of $Pb(Ni_{1/3}Nb_{2/3})O_3-Pb(Zr,\;Ti)O_2$ (PNN-PZT) powder and epoxy resin with 1:30 wt%, was used instead of conventional epoxy resin in order to activate the sensor function in the composite structure. The embedded impact sensor in the composite was fabricated using Hand Lay-up and Vacuum Assisted Resin Transfer Molding(VARTM) methods to inject the smart resin into the glass-fiber fabric. The electrodes were fabricated using silver paste on both the upper and bottom sides of the specimen, then poling treatment was conducted to activate the sensor function using a high voltage amplifier at 4 kV/mm for 30 min at room temperature. The composite's piezoelectric sensitivity was measured to be 35.13 mV/N by comparing the impact force signals from an impact hammer with the corresponding output voltage from the sensor. Because impact sensor functionality was successfully embedded in the composite structure, various applications of this technique in the SHM industry are anticipated. In particular, impact localization on large-scale composite structures with complex geometries is feasible using this composite embedded impact sensor.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.22-22
• /
• 2010

우리들은 초 중등교육을 통해 암석의 종류와 특징, 지질형태와 퇴적구조, 그리고 화석에 대해 지속적으로 교육 받아왔다. 그러나 암석이나 노두를 보고 학교에서 배운 지식을 바르게 적용할 수 있는 학생은 매우 드물다. 또한 아름다운 경관을 보며 지질학적으로 형성과정을 해석할 수 있는 사람도 매우 드물 것이다. 여기서는 지질경관에 대한 정보를 어떻게 제공하고 있는가에 대한 연구 성과를 정리해보고 문제점을 도출하고자 한다. 현재까지 지질경관을 알려주는 연구 성과를 크게 나누면 3종류가 있다. 첫째, 지질학습장의 개발 및 활용에 관한 연구이다. 이 부류의 수집된 자료는 학위논문(29편)과 전문학술지(27편)로 현재 56편이나 검색에 따라 더 늘어날 것이다. 이들은 야외 노두에 대한 효과적인 지질학습을 위한 자료개발을 위주로 하고 있다. 이러한 내용들은 전문가 양성에는 대단히 좋은 프로그램이지만 청소년이나 일반대중들에게 너무 어려운 내용으로 구성되어 있다. 또한 교육청에서 주관하는 탐방계획으로 "경기도 지구과학교사 연구회"가 있는데, 주로 경기도 한탄강유역을 대상으로 하고 있다. 이 연구회 자료에서는 지역의 특성을 살린 야외지질학습장을 개발하고 현장에 적용하기 위한 노력을 볼 수가 있다. 두 번째로 과학전람회 자료로서 현장교사와 학생들의 야외학습에 대한 인식이 잘 나타나 있다. 수집된 자료는 총 55편으로 야외지질조사를 통해 관찰 자체에 중점을 두었는데, 최근에는 노두관찰에 덧붙여 탐구학습 태도와 창의성을 함양하는 쪽으로 옮겨가고 있다. 세 번째 자료는 일반대중을 위한 서적이다. 이 서적들은 저자들의 전공에 따라 그 내용이 다소 다르다. 즉 일반여행안내 책자는 노두나 암석은 소개하고 있으나 지질학적 설명이 전혀없으며(예, 남도해안 2000리), 지리학자들의 저술에는 지형의 형성을 지질학적으로 설명하려 애쓴 흔적이 보인다(예, 한국지리이야기). 다음으로 지구과학들의 저술은 전형적인 지질답사 안내서에 가까워 내용 자체는 좋으나 흥미가 다소 떨어진다(예, 가족이 함께 떠나는 지질여행, 제주도 지질여행). 지질학과 흥미를 적절히 혼합한 책으로 '우리 땅 과학 답사기'정도가 있다. 최근 한국암석학회에서는 "우리의 명산"을 지질과 경관의 관점에서 해석하려는 심포지엄을 2차례 가졌다. 그러나 그 내용면에서는 경관지질이라는 개념을 정립했다고 보기에는 다소 미흡 하나, 황상구 교수의 주왕산에 관한 내용은 앞으로 경관지질 연구에 대한 발전의 여지를 보여주었다. 앞으로 지질경관에 대하여 지질학적 야외답사나 과학지식 습득에 국한시키지 말고, 그 지역의 특성을 살린 관광 또는 민속과 연계하여 지구과학적 학습효과와 더불어 인성교육에 도움이 되는 학습 콘텐츠를 개발하도록 노력해야 할 것이다. 일반 대중이 우리나라의 빼어난 지질 경관을 손쉽게 이해하고 즐기게 되면, 세계자연유산이나 세계지질공원을 지정 받는 과정도 더 쉬워질 것이다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1039-1046
• /
• 2007

In this paper, a coupled-defected ground structure(C-DGS) using negative inductive coupling is proposed and a bandstop filter(BSF) using C-DGS is designed and fabricated. The proposed C-DGS is the closely-located DGS cells for the negative coupling, the negative coupling of ground currents between adjacent DGS cells greatly improves the stopband characteristics. The proposed BSF utilizing the sharp cutoff response of the C-DGS has a -10 dB rejection band from 4 GHz to 11.3 GHz. A maximum attenuation rate is -64.3 dB/GHz in 3 cell structure, -108 dB/GHz in 5 cell structure. The C-DGS BSF shows the improved attenuation rate 3.8 times in 3 cell structure, 2.4 times in 5 cell structure, Also, the C-DGS BSF is reduced to 35.2 % and 40 % of the DGS BSF, respectively, due to the closely-located DGS cells. We fabricated the single gate mixer using C-DGS BSF. The single gate mixer has 6.6 dB conversion gain.

• Journal of Periodontal and Implant Science
• /
• v.28 no.2
• /
• pp.249-264
• /
• 1998

The present study evaluates the effects of calcium sulfate and DFDB on alveolar bone regeneration and cementum formation and connective tissue adhesion in intrabony angulated 1 wall defects of dogs. Four millimeter-deep angulated one-wall intrabony defects were surgically created in the mesial & distal aspects of premolars and with flap operaion alone(control group), with calcium sulfate(experimental group 1), with composit graft of 50% calcium sulfate and 50% DFDB(experimental group 2), with DFDB alone(experimental group 3). Histologic analysis following 8 weeks of healing revealed the following results: 1. The lengths of connective tissue adhesion was $1.05{\pm}0.48mm$ in the control, $1.30{\pm}0.67mm$ in the test group I, $0.97{\pm}0.22mm$ in the test group II and $0.93{\pm}0.15mm$ in the test group III. There was no statistical significance between control and all experimental groups. 2. Changes in alveolar bone level was $0.97{\pm}0.27mm$ in the control group, $1.45{\pm}0.42mm$ in the test group I, $2.00{\pm}0.33mm$ in the test group II, $1.88{\pm}0.34mm$ in the test group III. There was no statistically significant difference between control and experimental group I. There was a statistically significant difference between the control and experimental group II,III.(p<0.05). There was no statistically significant difference between all experimental group. 3. Cementum formation was $1.13{\pm}0.17mm$ in the control, $1.78{\pm}0.31mm$ in the test group I, $2.17{\pm}0.38mm$ in the test group II, $2.15{\pm}0.47mm$ in the test group III with statistically significant differences between control group and all experimental group(P<0.05). There was no statistically significant differences between all experimental group. These results suggest that the use of composit graft of 50% calcium sulfate and 50% DFDB and DFDB alone in angulated 1 wall intrabony defects has little effects on connective tissue adhesion, but has significant effects on new bone and new cementum formations.

• Journal of Periodontal and Implant Science
• /
• v.28 no.2
• /
• pp.219-237
• /
• 1998

Numerous bone graft materials have been used in Periodontics, in an attempt to reach the main goal of periodontal therapy, i.e. the regeneration of periodontal tissue lost due to destructive periodontal diseases. The present study investigates the effect of composite graft of DFDB and Calcium sulfate with and without Calcium sulfate barrier in Periodontal 1-wall intrabony defects in dogs. Following the initiation of general anesthesia by I.V. administration of 40mg/Kg of Pentobabital, second premolar was extracted and full thickness flap elevated. The crown portion of premolars was removed. Exposed root canals were sealed with Caviton and covered completely with flap. After the healing period of 8 weeks, the surgical sites were re-opened and 1-wall intrabony defects were created, and treated with flap operation alone(control group), with composit graft of 80% DFDB and 20% Calcium sulfate(Experimental group 1), with composite graft of DFDB and calcium sulfate with calcium sulfate membrane( Experimental group 2). Healing response was histologically observed after 8 weeks and the results were as follows : 1. New bone formation was 70 % in the control group, 93 % in the Experimental group I, 89 % in the Experimental group II. There was a no differences between Experimental groups. 2. New cementum formation was not significantly different between control and two Experimental groups. 3. The length of connective tissue adhesion was 30 % in the control, 7% in the Experimental group I and 11 % in the Experimental group II. 4. After 8weeks, calcium sulfate was completely resorbed, while DFDB particle remained. These results suggest that the use of composite graft of allogenic DFDB and Calcium sulfate with and without Calcium sulfate barrier in periodontal 1 wall intrabony defects have little effect on connective tissue adhesion, but has beneficial effect on new alveolar bone and new cementum formation, and prevent downgrowth of epithelium and connective tissue effectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.1
• /
• pp.57-68
• /
• 2002

The purpose of this study was to evaluate microleakage of etched and non-etched amalgam restorations lined with dentin bonding system primer and adhesives. Class V amalgam preparations were made in 100 extracted human premolars divided into 10 groups with 10 teeth each. SEM was taken to assess the dentin/amalgam interface. The results were as follows; 1. At the occlusal and gingival margins, all experimental groups showed lower leakage value than unlined group(p<0.05) The $Copalite^{(R)}-lined$ group showed higher leakage value than other experimental groups(p<0.05). 2. In all experimental groups, the gingival margin showed higher leakage value than the occlusal margin. 3. There were no significant difference between non-etching and etching groups, primer only and primer & adhesive groups, primer & adhesive and self-priming adhesive groups(p>0.05). 4. On the SEM observation, continuous gaps were observed in the unlined and $Copalite^{(R)}-lined$ groups, but the gaps were filled with primer or adhesive layer in other experimental groups.

• KSBB Journal
• /
• v.6 no.4
• /
• pp.327-336
• /
• 1991

A study on the optimum hydrolysis conditions of fish skin through the aid of enzymes and the development of a natural seasoning using the hydrolysate has been carried out for the effective utilization of fish skin. Using the "pH-drop" techniques the collagenase and pronase were identified as most suitable for this purpose. The $K_m$ and $V_{max}$ values of pronase were 1.82 mgN/ml and 0.06 mgN/mL/min, respectively. The hydrolysis conditions of the cod skin for the pronase were as follows: reaction temperature, $50^{\circ}C$; reaction time, 3hrs; pH 6; enzyme concentration, 0.03%. The degree of hydrolysis at these conditions was 76.8%. But after hydrolyzing cod skin with collagenase for 1hr, when the pronase was treated, the degree of hydrolysis was 83.13%. The molecular weight of the hydrolysate was 8,000 daltons. Among the amino acids in the hydrolysate, glycine(27.95%), glutamic acid(10.94%), proline(7.39%), aspartic acid(9.47%) and serine(7.39%) were responsible for 64.23% of the total amino acids. But valine, methionine, isoleucine, leucine, phenylalanine and histidine having a bitter taste were only 13.05%. From the results of the sensory evaluation, the imitation sauce which was made of 20% fermented soy sauce prepared from the hydrolysate was at least similar to the traditional soybean sauce in product quality. The complex seasoning containing 31.7% of the hydrolysate was nearly equal to complex seasonings on the market, too.