• 한국해양학회지
• /
• v.28 no.4
• /
• pp.259-271
• /
• 1993

The distributions of bottom sediments and the depositional processes on the continental shelves of Korean Seas are interpreted. Generally the continental shelf sediments can be classified into the sand-facies and mud-facies, showing the typical bimodal size distributions Most of the sandy and gravelly sediments on the outer shelf floor are interpreted as "relict" sediments that were deposited during the last glacial times when the sea level was lower than the present. On the other hand the muddy sediments on the inner shelf area are interpreted as "recent" sediments that are deposited under the present environment conditions. It is understood that most of the fine materials cannot escape the inner shelf area due to the strong tidal and coastal fronts, and are transported eastward from the West Sea along the southern coast of Korean Peninsula. The dark-colored muddy sediments in the Hupo Basin of the East Sea are, however, considered to be "relict" sediments. In the midshelf area fine materials are mixed with the relict coarse sediments, and some of the relict sediments are continuously reworked under the present environmental conditions forming the "palimpsest" sediments.

• 한국해양학회지
• /
• v.30 no.1
• /
• pp.1-12
• /
• 1995

The modal analysis was carried out for the total of 216 subface sediments of southern continental shelf of Korean peninsula. Sandy mud or muddy sand distributed in the range of 70∼100 m water depth revealed the bimodal type (sand and mud components). The relations of textural parameters obtained from every modal were consistent with those of shallow marine sediments. The characteristics of sand component between bimodal were as follows: (1) the distributions of mean grain size, sorting, shell content were repeatedly distributed like the directions of depth contour lines. (2) Sand component was composed of medium to fine sand (Mz, 1-3$\psi$) containing many shell fragments, a few pebbles, and iron-stained quartz. (3) The surface of quartz revealed the concordial breakage and V-shaped features formed at high energy environment. (4) In CM-pattern, sand component was plotted in rolling and bottom suspension area. These characteristics imply that sand component probably derives from shoreface sediments deposited at the beach environment.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.1
• /
• pp.31-40
• /
• 2016

A new testing equipment is designed to investigate the characteristics of the drainage fabric which is used in the tunnel drain system. The equipment is possible to model the loading as well as boundary conditions of the shotcrete precisely and it follows the general guideline of ASTM D4716 so that the interface between shotcrete and concrete lining retains the real situation in the tunnel site. Using the real loading conditions and surface irregularities, the flow rate and its capacity of the regular fabric has been estimated. A composite drainage fabric having geogrid inside was also used to investigate the flow rate and its efficiency. The advantages of the composite fabric compared with the regular one have been demonstrated using the experimental data and brief outline of the future work is finally proposed.

• Journal of Broadcast Engineering
• /
• v.21 no.5
• /
• pp.739-748
• /
• 2016

This study quantitatively measured the impact of blended learning with smart devices for learning satisfaction. It is targeted in specialized domestic company with IT Service which build smart learning systems and utilize for employee training. Specifically, it empirically analyzed that learning attitude(Self-efficacy, Self-innovativeness, Perceived usefulness, Perceived ease of use) with smart devices affect acceptance of smart learning and offline face-to-face learning satisfaction. As a result, the learning attitude of the smart learning gave a positive effect on the acceptance of the smart learning and then acceptance of the smart learning gave a positive effect on offline face-to-face learning satisfaction. Additionally learning the attitude of the smart learning even gave a positive impact, as well as the acceptance of smart learning experience in offline training. It imply that this variables of smart-learning attitude affect the self-directed learning and positive learning experience.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.70-75
• /
• 2006

The performance of a turbopump system composed of an inducer, an impeller, a volute and seals has been computationally analyzed. To save the computational time, only one flow passage of the inducer and impeller is considered for the computations. A steady mixing-plane method is used on the impeller/volute interface for simulating the unsteady interaction phenomena. The axial thrust is predicted from the turbopump calculation in its entirety, which is necessary for such estimation. Moreover, the effects of each component on the pump performance are investigated at a design condition through the analysis of flow structures. The predicted performance is in good agreement with experimental data in terms of head rise, efficiency and volute wall pressure distributions despite of highly complex flow structures being present. The computational results also show that the axial and radial thrusts are within the design limit although corresponding experimental measurements were not taken.

• The Journal of Engineering Geology
• /
• v.6 no.2
• /
• pp.59-64
• /
• 1996

Acoustic Emission(AE) signals are emitted by a sudden release of strain energy associated with material damage. A multi-channels of LeCroy system and piezoelectric pressure transducers are employed for AE measurement to investigate the roles of AE in the propagation of macro cracks as well as the characteris-tics of AE wave in occurrence, amplitude and dominant frequency with changes in macro loading modes. Deduced crack opening volume of micro cracks varied widely and implies that AE events could be caused by crystal dislocations on a small scale and grain boundary movements on a large scale. Amplitude of first arrival AE wave emitted during mode I test was approximately 3 times higher than those from mixed mode test, while the number of AE count in mode I test was only 25% of mixed mode. It may imply that the total energy required for generation of a given fracture surface is similar regardless in change of macroloading modes.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.486-490
• /
• 1999

In this study, to improve the required properties of tile cement mortar such as excellent water retention capacity (WRC), workability, open time, sag resistance, and tile adhesive strength, tile cement mortars containing the several additives with different ratio were compared and analyzed. By adding small amount of synthesized starch to hydroxypropyl methylcellulose (HPMC) which is used for improving WRC, the decrease of moisture evacuation from mortar surface was observed and the workability of mortar was improved with long open time. Polyacrylamide (PAAm) and ethylencvinyl acetate (EVAc) were also added in order to increase the adhesion of tile. As a results, the saggings of mortar itself and tile were decreased and the adhesive strength of mortar between base and tile was enhanced. By adding melment, the workability was improved by increasing the fluidity of mortar. It is postulated that the properties of tile cement mortar was improved by adding 0.80~1.20% of HPMC, 0.10~0.15% of starch, 0.001~0.015% of PAAm, 0.05~0.10% of EVAc and 0.003~0.005% of melment to the cement mortar.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.1
• /
• pp.71-79
• /
• 2014

Most researches have created the impervious surface map by using low-spatial-resolution satellite imagery and are inefficient to generate the object-based impervious map with a broad area. In this study, segment-based impervious surface mapping algorithm is proposed using the RapidEye satellite imagery in order to map impervious area. At first, additional bands are generated by using TOA reflectance conversion RapidEye data. And then, shadow and water class are extracted using training data of converted reflectance image. Object-based impervious surface can be generated by spectral mixture analysis based on land cover map of Ministry of Environment with medium scale, in the case of other classes except shadow and water classes. The experiment shows that result by our method represents high classification accuracy compared to reference data, quantitatively.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.1
• /
• pp.35-44
• /
• 2000

The winter case of the near-field dilution at the Masan outfalls has been studied by field measurements and CORMIX model simulations. Dilution rates of the wastewater discharge in winter were obtained by a salinity deficit method using the field data observed in the neap tidal period of February, 1999. The observed dilution rates in winter season were found to be very high in the range of 90～130 due to the isopycnal mixing of ambient density compared with the summer range of 30～40 under weak neap tidal currents. The results of CORMIX model simulations also show that the winter dilution rates under a weak ambient current(Ua=6.0ms/s) were increased by 3-fold of the summer dilution rates. However, the difference between two seasons becomes small by 30% under a strong current(Ua=15.5cm/s). This result indicates that the dilution and hydrodynamic mixing process of the effluents are more influenced by ambient crossflow condition than by ambient density stratification at the outfalls site.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.27-37
• /
• 2018

The purpose of this study is figure out secondary education undergraduates' communication patterns and perceptions of use in KAKAOTALK, one of the most frequently used Social Network Service(SNS). The mixed method research was conducted of survey about 86 students and in-depth interview 10 of them. The chief implication of research showed that it has been firstly functioning them to sustain public and private network and to be an universal tool of expression their opinion, idea, themselves, however, they still regard face-to-face communication important. Secondly, they think that KAKAOTALK is a part of their everyday lives and regarded a communication space to freely express themselves and to adjust and manage their image. Thirdly, they psychologically solved their loneliness and were encouraged, moreover, the contents of communication were different according to usd of public or private team chat room. It needs a follow-up study comparatively to analyze other generation's cognitive psychological values in SNS and to suggest digital culture literacy guideline.