• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.153-160
• /
• 2021

Nitrous oxide is a global warming substance and is known as the main cause of the destruction of the ozone layer because its global warming effect is 310 times stronger than carbon dioxide, and it takes 120 years to decompose. Therefore, in this study, we investigated the characteristics of NOx emission from N2O reduction by thermal decomposition of N2O. Bunsen premixed flames were adopted as a heat source to form a high-temperature flow field, and the experimental variables were nozzle exit velocity, co-axial velocity, and N2O dilution rate. NO production rates increased with increasing N2O dilution rates, regardless of nozzle exit velocities and co-axial flow rates. For N2O, large quantities were emitted from a stable premixed flame with suppressed combustion instability (Kelvin Helmholtz instability) because the thermal decomposition time is not sufficient with the relatively short residence time of N2O near the flame surface. Thus, to improve the reduction efficiency of N2O, it is considered effective to increase the residence time of N2O by selecting the nozzle exit velocities, where K-H instability is generated and formed a flow structure of toroidal vortex near the flame surface.

• Journal of the Korean earth science society
• /
• v.36 no.7
• /
• pp.617-631
• /
• 2015

The Sesong Formation, mixed carbonate-siliciclastic deposits of late Middle Cambrian (Series 3) to Furongian in age, in the Taebaeksan Basin shows the Steptoean Positive Carbon Isotope Excursion (SPICE) with the ${\delta}^{13}C$ values ranging from 1.14 to 2.81‰ in the approximately 15-m-thick stratigraphic interval. The SPICE in the Sesong Formation occurs in the lower part of the Paibian Stage which contains trilobite biozones of the Fenghuangella laevis Zone, Prochuangia mansuyi Zone and the lower part of the Chuangia Zone. The Sesong Formation is composed of six lithofacies including laminated mudstone, nodular shale, laminated sandstone, massive sandstone, limestone conglomerate, and limestone-shale couplet facies. The Sesong Formation is known to have been deposited in the outer shelf below storm wave base. The SPICE occurs in the stratigraphic interval associated with highstand systems tract, correlative conformity and transgressive systems tract of the Sesong Formation. The peak carbon isotope value in the SPICE may coincide with the correlative conformity formed by relative sea-level fall. The occurrence of the SPICE in the Sesong Formation suggests that the SPICE can be used as a tool of global correlation for the successions of mixed carbonate-siliciclastics which lack fossils.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1291-1296
• /
• 2006

This study was performed to determine the antimutagenic and anticancer effects of Fagopyrum esculentum Moenech noodles (FEMN) extracts using Ames test and cytotoxicity, respectively. FEMN made buckwheat wet noodles (BWN), buckwheat extruded noodles (BEN) and buckwheat dehydrated noodles (BDN) by 60% buckwheat flour and 70% buckwheat flour. The inhibitory effects of FEMN extracts on cell proliferation in A549, Hep3B, MCF-7, AGS and HeLa were investigated by SRB assay. The cytotoxic effects of FEMN against the cell lines with human lung carcinoma (A549), human gastric carcinoma (AGS), human hepatocellular carcinoma (Hep3B), human cervical adenocarcinoma (HeLa) and human breast adenocarcinoma (MCF-7) were inhibited with the increase of the extract concentration. The treatment of 1.0 mg/mL FEMN of 60% BEN extracts showed strong cytotoxicities of 74.7%, 75.3% and 70.5% against AGS, A549 and HeLa, respectively. The inhibition rate of 70% BWN of FEMN extracts in the S. Typhimurium TA100 strain showed 41% against the mutagenesis induced by MNNG. The inhibition rate of 70% BEN of FEMN extracts in the S. Typhimurium TA98 strain showed 45% against the mutagenesis induced by 4NQO.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.260-265
• /
• 1999

멀티빔 음향측심기(Multibeam Echo Sounder)는 기존의 단빔 음향측심기(Singlebeam Echo Sounder)와 달리 탐사선 진행방향의 수직(Crosstrack)으로 해저면을 주사(Swath)하여, 한 번의 송수신(Ping)으로 다중의 빔 자료 - 수심, 후방산란된 음압(Backscattered Amplitude), 사이드 스캔 소나(Side Scan Sonar) 자료 - 를 취득하는 장비이다. 멀티빔 음향 측심기를 이용한 해저면 탐사의 경우, 수심이 변함에 따라 주사폭(Swath width)이 변화하고, 각 빔의 수평 해상도(Footprint)는 수심과 더불어 빔폭(Beam width)에 의하여 동적으로 변화한다. 멀티빔 음향 측심기는 해저면을 전역탐사 할 수 있을 뿐만 아니라, 연속된 음향 탐사를 통하여 이웃한 핑 사이에 발생하는 전방중첩영역(Endlap)과 이웃 측선(Trackline)을 따라 겹쳐지는 측방중첩영역(Sidelap)의 자료들을 이용하여 멀티 뎀 자료들의 전반적인 정확도 및 신뢰도를 평가할 수 있다. 본 논문은 수로 측량(Hydrographic Survey)에서 사용되는 멀티빔 음향 측심기를 운영하여 얻어진 측심 자료를 처리하는 알고리즘 개발에 관한 연구이다. 본 논문에서는 L3사의 Sea Beam 2100 벌티빔 음향 측심기를 대상으로, 멀티빔의 측심 원리와 해저 지형에 대한 일반적 이해를 통하여 획득된 측심 자료의 통계적 특성을 파악하고, 오측심된 수심 자료를 제거하는 방법을 제안하며, 측심 구간의 대표격자 크기를 결정하는 기준을 제시한다. 또한, 항공원격탐사에서 고도 추정시 사용되고 있는, 평균보간법, 가중평균 보간법과, 본 논문에서 제안하는 격자 대표값 선정 알고리즘(Gridding Algorithms)의 결과를 비교하고, 최종적으로 얻어지는 해저 수치지형모델(DEM, Digital Elevation Model)과 후방산란 영상을 제시한다. 빠른 한지형잔디들이 지표면을 피복하도록 하고 여름의 고온기와 장마시기에는 뿌리전단력이 우수한 이러한 초종들로 지표면이 피복되도록 하는 것이 이상적이라 생각된다. 4. 혼파처리간의 토사유출량을 비교한 결과 토사 유출 억제효과는 한지형과 나지형잔디들의 혼합형(MixtureIII)과 자생처리구(MixtureV), Italian ryegrass와 자생식물의 혼합형(MixtureIV)등에서 비교적 낮은 수치를 토사유출량을 기록하였다. 이러한 결과는 자생식물들이 비록 초기생육속도는 외래도입초종에 떨어지지만 토사유출의 억제효과면에서는 이들 외래초종에 필적할 수 있음을 나타낸다고 할 수 있겠다.중량이 약 115kg/$m^2$정도로 나타났다.소 들(환경의 의미, 사람의 목적과 지식)보다 미학적 경험에 주는 영향이 큰 것으로 나타났으며, 모든 사람들에게 비슷한 미학적 경험을 발생시키는 것 이 밝혀졌다. 다시 말하면 모든 사람들은 그들의 문화적인 국적과 사회적 인 직업의 차이, 목적의 차이, 또한 환경의 의미의 차이에 상관없이 아름다 운 경관(High-beauty landscape)을 주거지나 나들이 장소로서 선호했으며, 아름답다고 평가했다. 반면에, 사람들이 갖고 있는 문화의 차이, 직업의 차 이, 목적의 차이, 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로 $\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$과 $\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로 더욱이 공간상에서는 뚜렷하게 경계

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.37-44
• /
• 2018

This study proposed the modified weighting values for jointed rock slopes. The studies on deduction of evaluation index and calculation of weighting, development of criteria for evaluation and evaluation models have been conducted through decision making techniques such as the Delphi method and the AHP method by many researchers. Because these decisions making techniques may be less objective, it is necessary to calculate reasonable weighting considering both an objective weighting and a subjective weighting simultaneously. In this study, utilizing the inspection data of jointed rock slopes, an objective weighting that the concept of entropy is applied was calculated. And the subjective weighting values by AHP technique was calculated based on the opinion of experts. And a modified weighting was suggested by combining the two. As a result, it was found that jointed rock slopes have higher weighting in artificial factors and the damage status items. In addition based on the finally suggested weighting (mixed weighting), the revised evaluation criteria could be presented by converting it into the evaluation score (76 points). And it is expected that it could be usefully utilized upon inspections on cutting slopes and safety diagnosis since objective and highly reliable criteria compared to the condition evaluation criteria that are currently used could be presented through the results of the study.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.1
• /
• pp.11-19
• /
• 2021

The aim of the research is providing a fundamental data on quality and constructability of direct tile setting method depending on various cement to sand ratio for tiling dry cement mortar. A large number of tile setting failures reported is related with the cement mortar and its construction for tiling. Because of different materials of tiles, the properties of tiling dry cement mortar, an adhesive for tiling, can influence on quality and constructability of tiling differently. Practically, the easiest way of controlling the properties of the tiling dry cement mortar is to control the proportion of cement and sand. Hence, in this research, sand to cement ratio (S/C) was controlled. Since there is no standarized method on evaluating performance of dry cement mortar for tiling, a several sensory evaluation methods were suggested and executed. According to the experiments conducted in this research, the adhesive performance of cement mortar for tiles can be different depending on the sides such as tile and substrate. Additionally, depending on S/C, finishability, initial adhesive performance, and tile shifting resistance can be changed for ceramic tile. Therefore, under the conditions of this research, about 5 of S/C can be recommended for appropriate performace of tiling dry cement mortar.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.5
• /
• pp.282-287
• /
• 2017

The purpose of this study was predicted the effects of mixing and diffusion due to the operation of the apparatus before the development of the mixed diffusion device for the decontamination absorbent to minimize the influence of contaminant inflow due to radiation accident. The tracer used for the flow characteristics was $^{68}Ga$, $^{99m}Tc$, which is a radioactive isotope, and 2 inch NaI radiation detector was used to detect it. The impeller of the decontamination mixed diffusion system applied to this study was made into three types and the mixing diffusion effect was compared. As a result of analyzing the flow characteristics of the radio-isotope with decontamination mixed diffusion device, mixing, diffusion and flow pattern were obtained. The radial mixing type impeller was able to diffuse to the water surface by the upflow flow, and the fin structure was adjusted for finding optimal conditions. The model 3 type consists of a fin guiding part and an auxiliary fin so that the diffusion speed is higher than that of other types of impellers. It also showed a short time to reach complete mixing.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.11
• /
• pp.61-66
• /
• 2014

The various recycling methods of mixed coal ash have been developed considerably and it's recycling quantity has been increased. However, the more relatively finer grain content of coal ash in ash pond is increased the more it's quantity is increased in recycling as products for drainage in soft ground etc. Accordingly, the geotechnical properties of mixed coal ash in ash pond would be inferior and it's recycling rate should reach the limitations in increase. In this study, to recycle mixed coal ash contained fine grain in considerably amount as products for strength, etc. By adding binder to it and manifesting, it's compressive strength is stronger than the criteria, these are suggested; 1) the variety of compressive strength test performed on mixed coal ash of various grain distributions as main material, 2) the kind of binder, it's mixing quantity and the optimum content rate range of fine grain coal ash that the compressive strength stronger than a certain compressive strength is manifested. Cement is more excellent than quicklime as binder in manifesting stronger compressive strength and the sieve type to sort it is #40 sieve in order to recycle all mixed coal ash in ash pond efficiently as products for drainage as well as products for strength, etc. And, it could increase insufficient compressive strength remarkably that content of pure sand is more in the rate as pure sand and the part of mixed coal ash in ash pond to pass through #40 sieve is mixed in the ratio of 2 to 8.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.29-33
• /
• 1999

Transition metallic $Cr^{3+}$ ion was diffused in white sapphire {0001}, ${10\bar{1}0}$ crystal plane which were grown by the Verneuil, it enhanced and changed the physical, electrical and optical properties of sapphires. After mixing the metallic oxide and metal powder, it were used for diffusion powder. When it was used the mixing powder of metal and metallic oxide, the dopping was slowly progressed and it needed the longer duration time and higher temperature, relatively. Metallic powder was vapoured under $1{\times}10^{-4}$ torr of vacuum pressure at $2050^{\circ}C$, first step, it were kept by the diffusion condition of 6 atm of $N_{2}$ accelerating pressure at $2050~2150^{\circ}C$. Each surface density of sapphire crystal are 0.2254(c) and $0.1199\;atom/{\AA}^2(a)$. The color of the Cr-doped sapphires was changed to red. Dopping reaction was come out more deep in the plane of ${10\bar{1}0}$ than {0001}. It was speculated that the planar density was one of the factors to determine diffusion effect.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.2
• /
• pp.65-73
• /
• 2015

The bank revetment work which is conducted on the slope of river bank to protect against flowing water as a geotechnical structure has been applied as an average value of critical tractive force based on domestic and international standard design. Currently, an appropriate evaluation is needed for the hydraulic stability and geotechnical behavior analysis of bank revetments because of the effects of climate change and ambiguous design criterion. This study has compared the critical tractive forces of soil improvement material and conventional materials used for the bank revetment work. Through various experiments, the shear strength of mixtures with soil improvement material was investigated by curing time and mixture ratio. It was found that the critical tractive force of the mixture obtained from a scour test is suitable to the reinforcement of the slope of river bank which has problems such as seepage erosion and scour.