• The KSFM Journal of Fluid Machinery
• /
• v.12 no.4
• /
• pp.7-13
• /
• 2009

The purposes of present work are to analyze the convective heat transfer with three-dimensional Reynolds-averaged Navier-Stokes analysis, and to optimize shape of the mixing vane using the analysis results. Response surface method is employed as an optimization technique. The objective function is defined as a combination of inverse of heat transfer rate and friction loss. Two bend angles of mixing vane are selected as design variables. Thermal-hydraulic performances have been discussed and optimum shape has been obtained as a function of weighting factor in the objective function. The results show that the optimized geometry improves the heat transfer performance far downstream of the mixing vane.

• Journal of computational fluids engineering
• /
• v.14 no.2
• /
• pp.1-8
• /
• 2009

The purposes of present work are to analyze the convective heat transfer with three-dimensional Reynolds-averaged Navier-Stokes analysis, and to optimize shape of the mixing vane taken tolerance into consideration by using the analysis results. Response surface method is employed as an optimization technique. The objective function is defined as a combination of heat transfer rate and inverse of pressure drop. Two bend angles of mixing vane are selected as design variables. Thermal-hydraulic performances have been discussed and optimum shape has been obtained as a function of weighting factor in the objective function. The results show that the optimized geometry improves the heat transfer performance far downstream of the mixing vane.

• KSBB Journal
• /
• v.15 no.1
• /
• pp.96-99
• /
• 2000

Liposome-amino acid conjugates were prepared using phopholipid (dipalmitoylphosphatidylcholine (DPPC) or distearoylph-osphatidylcholine(DSPC)) and hydrophobically modified amino acids (glutamic acid(glu), glutamine(gln) or asparagine(asn)). The size of liposomes was about 100 nm. According to the glucose-induced turbidity changes, liposomes composed of DPPC and glutamic acid have higher glucose binding affinity than liposomes of DPPC-glutamine or DPPC-asparagine. Also, the liposomes were more stable in terms of aggregation or fusion than the others (DPPC-glutamine, DPPC-asparagine and DSPC-amino acids). As a rdsult, stable liposomes with an affinity for glucose could be prepared with DPPC and glutamic acid.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.15-23
• /
• 1998

A three dimensional simulation of the fluid flow in an automotive torque converter was conducted adopting the mixing plane model implemented in the computational fluid dynamics program CFD-ACE. The present numerical results for performance characteristics showed a good agreement with the experimental results. In the flow of the torque converter, recirculating flow regimes were found mostly at the suction side of each element, which caused the performance decrease. The recirculating flow can be minimized by the optimization of the blade geometries.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.9
• /
• pp.56-63
• /
• 1999

Conventional method to improve the response time of the Cat-SPPCM was to increase fanning beam using cylindrical lens. But, in this case the temporal instability of this SPPCM is increased, and fanning beam plays a role as noise, so that it decreases the reflectivity. Thus, fanning beam must be controlled to improve the properties of SPPCM. In this paper, we propose the method to increase the reflectivity of SPPCM and decrease the response time by focusing line-shaped input beam into photorefractive crystal using cylindrical lens and decrease the temporal instability of output beam by using mixed-polarized beam instead of simple extraordinary polarized beam. Optical experiments show that the reflectivity of proposed SPPCM is increased twice and the response time is reduced by 15 times. Also, we observed that the temporal instability of SPPCM is reduced when the polarization angle of the mixed-polarized beam is between $10^{\circ}$ and $30^{\circ}$ . We used a $45^{\circ}-cut\;BaTiO_3$ crystal which has high electro-optical coefficients in optical experiments.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.2
• /
• pp.13-21
• /
• 2020

In Korea, small reservoirs have been constructed for the supply of agricultural water, but most of them have been over 50 years from the year of construction. Aging agricultural reservoirs are being investigated for serious defects such as leaks and movements in slope, which are very vulnerable to safety. Accordingly, grouting methods are used to reinforce aging agricultural reservoirs in Korea. However, cement used as a grouting injection material consumes natural resources and generates a large amount of greenhouse gases during production. In addition, there is a problem that sufficient reinforcement is not made due to various factors such as the injection amount, the compounding ratio, the injection pressure, and etc. Therefore, due to these problems, the development of new materials and methods that can replace the grouting method and cement is required. In order to solve these problems, this study conducted an laboratory test on the surface stabilizer used to secure the stability of road and rail slopes. In addition, the program was analyzed and the reinforcing effect was examined when the surface stabilizer was used as reinforcement material for aging agricultural reservoir. As a result of the laboratory test, when the surface stabilizer is mixed, the increase of cohesion is possible up to 9% and there is no change in the friction angle. The results of the program analysis showed that the 1.0m reinforcement of slopes increased the factor of safety by 1.4 times, making it possible to reinforce the aging agricultural reservoir using surface stabilizers. And as a reinforcement method, it was analyzed that it is most appropriate to reinforce the slope and the bottom of slope simultaneously.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.1
• /
• pp.61-69
• /
• 2004

This paper describes numerical efforts to characterize the flame-holding and air-fuel mixing process of model SCRamjet engine combustor, where a hydrogen jet injected into a supersonic cross flow and in a cavity Combustion phenomena in a model SCRamjet engine, which has been experimentally studied at University of Queensland and Australian National University using a free-piston shock tunnel, was observed around separation region of upstream of the normal injector and inside of cavity. The results show that the separation region and cavity generates several recirculation zones, which increase the fuel-air mixing. Self ignition occurs in the separation-freestream and cavity-freestream interface.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1048-1058
• /
• 2000

Thipaper presents a methodology to suppress the vibration of thin rectangular plate clamped all edges using piezo-ceramic material as actuators and sensors. Dynamic characteristics of the structure bonded with distributed actuators/sensors are identified by the Multi-Input Multi-Output (MIMO) frequency domain modeling technique based on the experimental data. Hybrid control scheme is adopted and feedback controller is designed by LQG(Linear Quadratic Gaussian). Feedforward controller is adapted by multiple filtered -$x$ LMS(least mean square) algorithm. Experiment result demonstrates the effective reduction of the vibration label for both the transient and persistent external disturbances.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.99-107
• /
• 1997

A mixed type finite element method is applied to the nonuniform shear warping beam theory which is very useful for the structural analysis of thin-walled sectional beams considering the shear deformation. As known generally, it is shown that the mixed type finite element method, compared with the displacement type one, can give more balanced accuracy of results in calculating the stresses and displacements of the structure. In this paper, one typical example, the flexural-torsional problem of a discontinuously variable sectional beam under coupled end torsional moments, is selected and analyzed to validate the usefulness of the developed beam element.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.277-277
• /
• 2021

합류부는 인공수로 또는 자연하천에서 흔히 존재하며 매우 복잡한 흐름 구조가 발생하는 곳이다. 특히 본류와 지류의 유속장의 차이에 따라 발생하는 전단층은 흐름과 물질이 혼합되는 경계면이 되며, 흐름 구조가 전단층을 따라 발달한다는 특징으로 인해 수리학적으로 매우 중요하다. 최근 원격탐사 기법의 발전에 따라 위성이나 드론과 같은 무인 이동체를 이용한 하천 계측법이 수질 및 지형변화 연구들에 광범위하게 적용되고 있다. 그 중 RGB 항공영상은 해상도가 높고 취득 비용이 저렴하여 확장성 및 활용도가 높다. 본 연구에서는 합류부 전단층이 촬영된 RGB 항공 영상을 이용해 합류부 전단층 분석에 활용하는 방법을 제안한다. 제안되는 방법은 RGB 항공 영상에서 본류와 지류의 수체 영역을 각각 추출하기 위해 가우시안 혼합 모형(Gaussian mixture model)을 이용한다. 추출된 수체 영역에는 자기조직화지도(self-organizing map)을 적용하고 좌표 변환을 하여 정량적인 특징을 추출한다. 본 연구에서는 알고리듬의 적용 예로서 구글어스를 통해 확보된 낙동강-남강 합류부의 항공 영상을 분석한다. 본 추출법을 이용하면 접촉식 센서를 이용하는 기존의 전단층 계측 방법들에 비해 경제적이고 안전하며 합류부 흐름의 평면적 분석을 가능하게 할 수 있을 것으로 기대된다.