• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.984-991
• /
• 2002

Oxidative stability and flavor of sesame oil blended with canola oil (Ca), corn oil (Co), and soybean oil (Sb) at ratios of 90 : 10, 70 : 30, and 50 : 50 (w/w), respectively, were evaluated. Oxidative stability of sesame oil increased with the addition of vegetable oils (10, 30, and 50% of Ca and Co, and 10% of Sb). Pyrazines, pyrroles, pyridines, and thiazoles, good contributors to the characteristic flavor of sesame oil, were also found in sesame oil blended with vegetable oil. The sensory evaluation showed that no difference was observed between sesame oil and sesame oil blended with 10% of Ca, Co or Sb, which showed higher oxidative stability.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.616-623
• /
• 2004

Fermentation characteristics of rice-grape wine with different mixing ratios of rice and grape, rice one vs. grape five (Exp.1), rice two vs. grape five (Exp.2), rice five vs. grape five (Exp.3), and rice five and grape two (Exp.4), were investigated. Final alcohol contents of Exp.4, Exp.3, Exp.2, and Exp.1 were 18.4, 16.0, 14.9, and 12.9%, respectively. Final alcohol content increased with increasing amount of rice. Acidity of four experiments ranged pH 3.4-3.92, and total acidity was 0.52-0.74%. Exp.4, Exp.3, Exp.2, and Exp.1 gave a values of 8.76, 12.77, 12.88, and 23.96, respectively. When different mixing methods were applied to Exp.1, the resulting final alcohol contents of Exp.6 (grape musts periodically added after rice fermentation), Exp.7 (rice and grape simultaneously added and fermented), and Exp.8 (rice added after grape must fermentation) were 2.3-3.2% Bower than that of Exp.1 (grape must added after rice fermentation), and total acidity was 0.72-0.74%. Sensory evaluation comparing conventional red wine and rice-grape wine of Exp.1 showed rice-grape wine was preferred in taste.

• Korean Journal of Agricultural Science
• /
• v.19 no.2
• /
• pp.153-160
• /
• 1992

To investigate the potential of paper mill sludge and briquet ash as cultural media in turfgrass, zoysiagrass was grown in the mixtures prepared with paper mill sludge and briquet ash. The mixtures were consisted of sludge and briquet ash in the ratio by volume 3:1, 2:1, 1:1, 1:2, and 1:3 in the order. To compare the growth responses, some plants were grown in the medium containing sand(3), field soil(1) and peatmoss (1) by volume anti regarded as control. 1. Activated sludge mixed with sand increased plant height, fresh weight, and dry weight more than 1.5-2.0 times compared to those of the control. The highest plant growth was shown in mixtures containing 67% activated sludge. 2. Plant density per $100cm^2$ and chlorophyll content were higher in all mixtures containing activated sludge than control. 3. The growth of zoysiagrass was reduced along with the increase of non-activated sludge ratio, but no difference was found in chlorophyll content. 4. Plant height, fresh weight and dry weight were greater in activated sludge combined with sand compared to the briquet ash mixtures, but the difference of shoot density between two mixtures was not shown. 5. Even though non-activated sludge appeared not to be appropriate to the growth of seedlings, the number of tillers of plant propagated with rhizome was more increased compared to control when briquet ash content was less than 75%.

• Asian Journal of Turfgrass Science
• /
• v.17 no.4
• /
• pp.129-146
• /
• 2003

Research was initiated to compare establishment vigor, uniformity, rooting potential and turf quality in sods of cool-season grasses (CSG). Several turfgrasses grown under pure sand soil were tested. Establishment vigor, uniformity, rooting potential and turf quality were evaluated in the study. Turfgrass entries were comprised of three blends from Kentucky bluegrass (KB, Poa pratensis L.), perennial ryegrass (PR, Lolium perenne L.), and tall fescue (TF, Festuca arundinacea Schreb.), respectively and three mixtures among them. Differences by treatments were significantly observed in establishment vigor, uniformity, rooting potential and turf quality. Early establishment vigor was mainly influenced by germination speed, being fastest with PR, intermediate with TF and slowest with KB. In a late stage of growth, however, it was affected more by growth habit, resulting in highest with KB and slowest with TF. There were considerable variations in sod uniformity among turfgrasses. Best uniformity among monostand sods was associated with KB, while poorest one with TF. PR sod produced intermediate uniformity between KB and TF. The uniformity of polystand sods of CSG mixtures was inferior to that of monostands of KB, PR and TF, due to characteristics of mixtures comprised of a variety of color, density, texture and growth habit. The greatest potential of sod rooting was found with PR and the poorest with KB. Intermediate potential between PR and KB was associated with TF. In CSG mixtures, it was variable, depending on turfgrass mixing rates. Generally, the higher the PR in mixtures, the greater the sod rooting potential. At the time of sod harvest, however, turfgrass quality of KB was superior to that of PR. because of its characteristics of uniform surface, high density and good mowing quality. These results suggest that a careful expertise based on turf quality as well as sod characteristics like establishment vigor, uniformity and rooting potential be strongly required for the success of golf course or athletic field in establishment.

• Journal of the Korean Institute of Gas
• /
• v.7 no.4 s.21
• /
• pp.24-29
• /
• 2003

Numerical analysis was conducted to predict the damage of indoor gas explosion for the propagation of explosion flame. Indoor gas diffusion distribution due to gas leakage was obtained by diffusion equation that adopted initial conditions from reference. Enthalpy of each gas-mixture ratio and reduced mechanism was applied to calculate flame temperature, and laminar combustion velocities with the variant of each gas concentration from reference were applied to the gas mixture. Turbulent combustion velocity was modeled by coupling of turbulent energy and laminar combustion velocity in k-$\epsilon$ model. For the analysis of flame propagation cartesian and cylindrical coordinate were used to indoor position and flame propagation respectively. The study analyzes the cause of pressure rising with the variation of flame propagation by glass damage, and the result shows that indoor pressure rising with ignition position varies window dimension.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.44-54
• /
• 2018

In a spray experiment using a venturi mounted on a lean premixed LPP injector, droplets appear to have non-uniform distributions. To solve this problem, the exit angle of the venturi was changed to form a dump surface on the nozzle neck. The dump surface improved the atomization performance and minimized droplet loss while forming recirculation zone in the venturi exit. In order to solve the non-uniform spray of the injector, the flow characteristics inside the venturi and SMD of the spray are compared. Finally, an optimum venturi shape is selected to minimize the spray loss and improve the spray performance.

• Knowledge Management Research
• /
• v.22 no.3
• /
• pp.235-252
• /
• 2021

The development of information and communication technology and COVID-19 have caused an unusual change in the hotel industry, and the demand for the contactless services such as service robots from hotel customers has surged. Therefore, this study investigates the perception of hotel customers on contactless services by applying a mixed-method analysis. Specifically, this study identified the causal correlations between variables through the structural equation model, and further applied the fuzzy set qualitative comparison analysis to derive patterns of variables that form the intention to use the non-face-to-face services. As a result of the analysis, it was shown that service experience co-creation, palyfulness, personalization, and trust had a significant effect on intention to use through the contactless service use desire. On the other hand, in the results of fuzzy-set qualitative comparison analysis, playfulness was derived as a core factor in all patterns. Based on these analysis results, this study provides academic basis for in-depth understanding of hotel customers' perception of contactless service and specific guidelines for hotel managers on the contactless service strategies in the era of COVID-19 pandemic.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.220-220
• /
• 2023

단순한 하상 변동 모형은 단일한 입경으로 구성된 하상재료를 다루는 데에 비해, 실제 하천에서는 다양한 입경의 유사가 섞여있다. 이러한 혼합 입경의 유사 이송을 모의하고자 하면 퇴적층의 생성과 소멸을 어떻게 모의하는지에 대한 기법이 중요해진다. 과거 연구에서는 유수의 영향을 받는 하상 두께가 입도 분포에 따라 다르다고 생각하였다. 반면, 다른 연구들에서는 두께가 합리적인 범위 내에 있다면 모의 결과에 영향을 미치지 않는다고 보고 상수로 설정하였다. 퇴적층의 개수를 어떻게 고려하느냐에 따라서도 모의기법이 나누어진다. 단일한 입경을 모의하는 경우 단일 퇴적층을 고려하지만, 혼합 입경을 고려하는 모형은 크게 2개의 퇴적층(active layer와 non-active layer)으로 나누는 종류와 3개 이상의 퇴적층을 고려하는 모형으로도 나눌 수 있다. 이 연구에서는 혼합 입경의 유사 이송을 모의할 수 있는 전 지형 발달 모형을 활용하여 퇴적층 처리 기법의 차이가 얼마나 모의 결과에 영향을 주는지를 파악하였다. 모의 결과는 기법이 바뀜에 따라 매우 민감하게 변하는 것을 확인할 수 있었다. 또한 이 연구에서는 3개 이상의 퇴적층을 고려함에 있어서 기존 퇴적층에 새로운 물질이 퇴적되었을 때 경계면에서 입자가 섞이는 mixed layer를 고려하는 개념을 제시한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.3
• /
• pp.485-494
• /
• 1999

본 연구에서는 요소를 사용하지 않고 절점들만을 이용하여 해석이 가능한 새로운 수치해석기법인 EFG(Element-Free Galerkin)법을 사용하여 임의의 균열의 성장과정을 해석할 수 있는 효율적인 알고리즘을 개발하고, 이를 바탕으로 균열의 성장방향과 경로를 정확히 추정하여 일련의 균열진전해석을 수행할 수 있는 프로그램을 개발하였다. 균열해석에 있어서는 균열선단의 특이성과 균열면의 분연속성을 수치적으로 반영할 수 있는 기법을 도입하여 균열을 모형화하였으며, 선형탄성파괴역학이론에 근거하여 균열해석과정을 정식화하였다. 또한, EFG 형상함수가 kronecker delta 조건을 만족시키지 못함으로써 발생하는 필수경계조건의 처리문제를 penalty법을 이용하여 해결하였다. 개발된 균열진전해석 알고리즘을 정지상태와 성장하는 상태에 있는 모드 Ⅰ, 모드 Ⅱ 및 혼합모드상태의 대표적인 균열문제들에 적용하여 응력확대계수와 균열성장방향 및 균열의 성장경로를 추정하고 이를 이론적·실험적 결과들과 비교함으로써 그 정확성과 효율성을 검증하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.11
• /
• pp.57-64
• /
• 2005

Large Eddy Simulation (LES) of turbulent premixed combustion flow is performed by using the dynamic subgrid scale model based on -equation describing the flame front propagation. After introducing the LES governing equations with dynamic subgrid scale (DSGS) model newly introduced into the -equation, the turbulent premixed combustion flow over backward facing step is analyzed to validate present formulation. The calculated results can predict the velocity and temperature of the combustion flow in good agreement with the experiment data.