• Elastomers and Composites
• /
• v.12 no.1
• /
• pp.43-46
• /
• 1977

브롬화 부틸고무는 새로운 연속적(連續的)인 방법(方法)에 의해 제품(製品)의 질(質)이 균일(均一)하고 안정(安定)한 제품(製品)을 얻을 수 있는 바 이것은 소위(所謂) 상품명(商品名)으로 Folysar Bromobutyl X2라 한다. 이 고무는 일반(一般) 부틸고무와는 달리 여러가지 장점(長點)을 지니고 있다. 다시 말하면 일반(一般) 부틸고무에 비(比)해 첫째 가황속도(加黃速度)가 빠르며, 둘째 천연(天然)고무 또는 SBR과 같은 불포화(不飽化) 고무들과 혼합사용(混合使用)이 가능(可能)하며, 셋째 이러한 고무들과의 혼합사용시(混合使用時) 접착력(接着力)도 우수(優秀)하며 마지막으로 글로로프렌이나 EPDM과도 혼합(混合)이 가능(可能)하기 때문에 여러가지 용도(用途)로 사용(使用)할 수 있다. 이러한 점(點)을 참작(參酌)하여 브롬화 부틸고무의 이용도(利用度)는 (1) 타이어중, tubeless 타이어의 inner liner, white side wall, sidewall coverstrip 그러고 라디얼 타이어에 이용(利用)될 수 있고, (2) 내열성(耐熱性)이 요구(要求)되는 고속용(高速用) 또는 heavy-duty 타이어의 튜우브, 자동차(自動車) 부품(部品) 예(例)컨대 mount등(等)에 이용(利用)할 수 있을 뿐만 아니라 행크 라인닝, 고무 호오스, 콘베어 고무벨트, 의료용 병마개, 접착제등(等)에 광범위(廣範圍)하게 이용(利用)할 수 있다.

• Elastomers and Composites
• /
• v.11 no.1
• /
• pp.63-73
• /
• 1976

에너지 위기후(危機後) 천연자원(天然資源)이 점차로 고갈(枯渴)되여 가고 있는 요즈음 고무산업(産業)에도 이의 여파(餘波)로 몇가지 영향(影響)을 받고 있다. 한 예(例)로 일반적(一般的)으로 널리 사용(使用)되고 있는 23.5% 스티렌 함량(含量)의 SBR제조(製造)에 있어 값싼 부타디엔 및 스티렌 단량체(單量體)를 만들기에는 세계적(世界的) 자원부족(資源不足)으로 인(因)하여 심각(深刻)한 위치(位置)에 놓여있어 장차(長次) 안가(安價)이며 충분(充分)한 량(量)의 합성(合成)고무를 공급(供給)하기에는 SBR과 다른 고무와의 부분적(部分的) 또는 완전(完全)히 다른 합성(合成)고무로 대치 사용함이 타당(妥當)할 것이다. 확범위(擴範圍)한 실험(實驗)끝에 $50\sim55%$ vinyl함량(含量)의 폴리부타디엔 고무가 제조(製造)되였는데 이것은, 자동차용 트레드 부분과 wet skid resistance애 많이 이용(利用)되고 있는 유화(乳化) 또는 용액중합(溶液重合)의 SBR과 매우 유사한 물리적(物理的) 특성(特性)을 나타낸다. 그리고 $45\sim50%$ vinyl함량 폴리부타디엔 고무는 오히려 SBR보다 내마모와 crack growth가 더 좋음을 알았다. 45% vinyl함량 폴리부타디엔 고무와 SBR, cis-플리부타디엔 고무(30/35/35)의 3성분(成分) 혼합체(混合體)는 65/35비율(比率)의 SBR/cis-폴리부타디엔 고무보다 트레드의 마모성이나 미끄럼성이 더 좋았으며 또한 45/20/35 비율(比率)의 혼합체(混合體)도 역시 내 마모성이 좋은 것으로 나타났다. 이와같은 medium vinyl 폴리부타디엔 고무는 SBR로 이용(利用)되고있는 (非)타이어 산어(産業)에서도 SBR대신 단독(單獨) 또는 일부분(一部分) SBR과 혼합(混合)해서 사용(使用)할 수 있다. medium vinyl폴리부타디엔 고무는 낮은 발열성(發熱性)(heat build-up) 그리고 내(耐)빵구성(性)이 우수(優秀)하며 SBR과 유사(類似)한 물리적(物理的) 특성(特性)을 가지고 있으므로 스티렌의 생산(生産)이 활발(活發)해지고 값이 저겸(低謙)하드라도 위와같은 장점(長點) 때문에 장차(長次) 계속 사용(使用)될 것이며 더욱더 개발(開發)될 것이다.

• Rubber Technology
• /
• v.3 no.1
• /
• pp.62-64
• /
• 2002

• Elastomers and Composites
• /
• v.34 no.3
• /
• pp.253-261
• /
• 1999

The cure properties of rubber compounds containing different adhesive compositions were examined. As the amounts of tannin were increased in the adhesive composition, the scorch time was increased and cure rate was decreased due to the size and shape of tannin molecules. Also, the effect of adhesive composition on the adhesion between rubber and fiber was examined by TCAT(Tire Cord Adhesion Test), The reinforcing cords used in this study were mon ofilaments of nylon 610 and nylon 66. According to the results, the optimum adhesion strength between rubber and fiber could be obtained with adhesives whose molar ratios of formaldehyde/resorcinol were above 5/1 in the recipes. Although the level of dip pick-up(DPU) on the reinforcing cord affects the adhesion strength, the DPU of nylon 610 monofilament did not affect the adhesion strength because the level of DPU was constant regardless of the adhesive compositions. In this case, the adhesion strength with the adhesive composition could be explained with the behavior of tannin in the adhesive.

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.273-280
• /
• 2003

Elastic responses on both pure natural rubber melts with different molecular weights and the rubber compounds mixed with various types of carbon blacks were investigated in this study. Furthermore, the degree of bound rubber was measured for various carbon blacks with different sizes and structures in order to study the interaction between the rubber and carbon blacks, and to study the correlation between the interaction and the elastic responses. As a loading amount of carbon black increased, the degree of bound rubber became higher, particularly far carbon-black particles with smaller sizes and higher structures. The elastic responses of the rubber melt filled with carbon black remarkably improved, as compared with those of unfilled rubber melt, specially in carbon black showing higher contents of bound rubber. Stress relaxation was more delayed and recovery behavior became more elastic, as the molecular weight of the rubber melt increased and the size of carbon-black particles was decreased. Permanent set became higher, as the molecular weight of the rubber melts decreased and the size of carbon-black particles increased.

• Elastomers and Composites
• /
• v.39 no.1
• /
• pp.51-60
• /
• 2004

The cure, viscoelastic and mechanical characteristics of organoclay filled NR/BR blends were studied and compared with the properties of carbon black and silica filled NR/BR blends. The nanocomposites with extensive exfoliation state can be fabricated by a solution mixing method. In the composites, the amount of filler content was fixed to 10 phr. Degree of intercalation and exfoliation was characterized by X-ray diffraction (XRD). XRD results indicated exfoliation of the silicate layers into the rubber matrix. While the degree or intercalation and exfoliation is lowered by the conventional mixing method, extensive exfoliation can be obtained by the solution mixing method. It was found that the clay filled NR/BR compound showed better viscoelastic (tan ${\delta}$) and mechanical properties than the carbon black or silica filled NR/BR compounds.

• Elastomers and Composites
• /
• v.19 no.2
• /
• pp.114-120
• /
• 1984

• Journal of the Korean Geotechnical Society
• /
• v.27 no.3
• /
• pp.85-94
• /
• 2011

Mixtures of sand and rubber particles ($D_{sand}/D_{rubber}=1$) are investigated to explore their characteristics under different stain level. Mixtures are prepared with different volumetric sand fractions ($sf=V_{sand}/V_{total}$). Experimental data are gathered from a resonant column, an instrumented oedometer, and a direct shear tests. Results show that sand and rubber differently control the behavior of the whole mixture with strain level. Non-linear degradation of small strain stiffness is observed for the mixtures with $sf{\geq}0.4$, while the mixtures with low sand fraction ($sf{\leq}0.2$) show significantly high elastic threshold strain. Vertical stress-deformation increases dramatically when the rubber particle works as a member of force chain. The strength of the mixtures increases as the content of rubber particle decreases, and contractive behavior is observed in the mixtures with $sf{\leq}0.8$. Rubber particle plays different roles with strain level in the mixture: it increases a coordination number and controls a plasticity of the mixture in small strain; it prevents a buckling of force chain in intermediate strain; it leads a contractive behavior in large strain.

• Rubber Technology
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2006

• Rubber Technology
• /
• v.7 no.2
• /
• pp.71-81
• /
• 2006