• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.163-166
• /
• 2000

This paper describes the principle of humidity sensor using high frequency resistance method for Hopper-Scale that is used in RPC(Rice processing Complex) which is spreaded out in domestic, and we also understand the principle and specificity of controller and humidity sensor. After artworking the humidity sensor and controller circuit, we measure the humidity of the designed system. In this progress, we suggested substitute parts which are easy to get in domestic and also we could propose correct method of humidity detection.

• The KSFM Journal of Fluid Machinery
• /
• v.8 no.2 s.29
• /
• pp.16-22
• /
• 2005

This research inspects the discharge state for inside of sedimentation basin, and, through the aboard literature and data, examine sedimentation sludge about discharge plan of effective sedimentation sludge that can discharge in state of high concentration. In this study, we are going to attempt an economy with improvement efficiency for discharge of sedimentation sludge in a water treatment plant.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.259-264
• /
• 2003

This research inspects discharge state of inside of sedimentation basin, md, through the aboard literature and data, examine sedimentation sludge about discharge plan of effective sedimentation sludge that can discharge in state of high concentration.

• 기계와재료
• /
• v.22 no.1
• /
• pp.66-75
• /
• 2010

곡물선별기는 호퍼, 진동식 정량시료공급장치, 공급벨트 또는 슈트, 램프, 이미지 센서, 공기총, 제어장치로 이루어져 있고, 농산물 등의 제품속의 이물질이나 불량품을 선별해내는 장치로 최근의 국내외 식생활의 향상과 더불어 매우 부가가치가 높은 제품으로 평가받고 있다. 본고에서는 곡물선별기의 국내외 최신동향을 다루었으며, 곡물선별기에 있어 핵심부품인 이젝터 및 이젝터용 밸브를 집중적으로 조명하였다. 특히 솔레노이드 밸브를 대신하는 압전식 밸브의 타당성을 논하기 위하여 압전 액추에이터 설계/제작/실험결과 관련 정보를 수록하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.439-445
• /
• 2012

Only the sand carriers fitted with hopper doors can remove their hatch covers in current regulations. However, there is no sand carriers fitted with hopper doors in korea. Through the analysis of accidents, inspection of equipment installed on ships, and evaluation of stability and seakeeping performance concerning the sand carriers, it is expected that the current exemption requirement is modified for hatch covers for sand carriers. As the result, this paper proposed the removal of hatch covers and be fitted by tarpaulin instead to protect water ingress into the holds. This can be done by making the holds smaller designed to be filled full until the top of the hold without exceeding loadline. Also, the bilge pumps should have the sufficient capacity of pumping water out in the early stage of sand-water mixture to wetted condition in approximately 1 hour and be operationally ready in every voyage conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.269-274
• /
• 2016

This paper proposes the development of a low frequency electronic hammer drive system that is used to prevent scaling or clogging in the hopper process. The electro-mechanical hammering driving method involves the generation of vibration and impact energy. The operation principles of the electromagnetic hammer were considered by parallel/series spring coefficient analysis and the amount of kinetic energy generated was calculated from the product of the equivalent spring constant, which is coupled with the E core and the gap of between the E core and I core. In addition, the Pulsation Driving algorithm was applied to the proposed electromagnetic hammer to obtain the maximizing kinetic energy. This algorithm was then implemented by a logical AND operation process and micro-controller (atmega128) built in functions with a timer interrupt and PWM generation function. The driving circuit of the electromagnetic hammer was designed using the H-bridge type IGBT circuit. The experimental test was performed by usefulness of the developed electromagnetic hammer systems with the acceleration measurement method. The experimental result showed that the proposed system has good kinetic energy generation performance and can be applied to the hopper process.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.127-138
• /
• 2018

In this study, the operational characteristics of a domestic vegetable transplanter were investigated. The main functional components and power path of the tranplanter were analyzed. The link structure of transplanting device waskinematically analyzed, and 3D modeling and dynamic simulation were performed. Based on this analysis, the trajectory of the bottom end of the transplanting hopper was analyzed. Also, the plant spacing according to the engine speed and the shifting stage of transplanting transmission was analyzed and verified by field test. As main results of this study, the transplanting device is one degree of freedom(DOF) 4-bar link type mechanism which comprises 10 links and 13 rotating joints. The transplanting hopper plants seedlings in a vertical direction while maintaining a constant posture by the links of transplanting device. The power is transmitted to both the driving part and transplanting part from the engine, and the maximum and minimum plant spacing of the transplanting device were 428.97 mm and 261.20 mm.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.263-268
• /
• 2011

There are many exclusive freight cars in railway freight transportation system. Gondola is one kind of freight cars. Gondolas have a role to carry bulk-type cargo such as coals and ores. A few problems are occurring due to exclusive freight cars. Operation company has redundant freight cars because exclusive freight cars can carry limited items. And purchasing cost of freight cars is higher and higher because of irregular bid. Operation efficiency of gondola is very low because return time of gondola is much longer than that of container car. In this study, we analysed the introduction effect of hopper-type container for through transit. First, we identified the characteristics of spatial distribution on freight stations. And we provided the effect of hopper-type container in terms of operation efficiency, cost reduction, new demand excavation and image enhancement of eco-friendly railroad.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.4
• /
• pp.193-197
• /
• 2016

There are many hoppers in the actual industrial plants such as grain hoppers in agricultural companies, surge hoppers in steel companies, and so on. In general, they are time-delay systems so that their level control is not easy. Thus, they have been manually controlled to avoid the overflow and empty out. In this paper, we proposed Fuzzy PID controller for level control of hopper systems. To show the effectiveness of the proposed scheme, some simulation results are given.

• Journal of Welding and Joining
• /
• v.18 no.1
• /
• pp.77-82
• /
• 2000

The aim of the present study is to investigate the characteristics of ultimate the fatigue strength of hopper knuckles in merchant vessels carrying bulk cargo or LNG/LPG/ The ultimate strength test is undertaken on the hopper knuckle model, subject to end tip load. A series of fatigue tests are carried out on the hopper knuckle models varying the level of the nominal stresses. The elasto-plastic finite element analysis is performed to examine the distribution of hot spot stresses near weld toe and also the progressive collapse behavior of the test model. S-N curves are developed based on the fatigue test results.