• Restorative Dentistry and Endodontics
• /
• v.12 no.2
• /
• pp.7-10
• /
• 1987

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1601-1604
• /
• 2006

본 연구는 교각주위에 발생하는 국소 세굴의 특성을 파악하기 위해 세굴공의 형태, 범위, 최대세굴심의 특성을 분석하였으며, 이를 위한 교각 형태의 변화에 따른 교각주위의 국소세굴 변화 양상에 관한 실험을 수행 하였다. 정적세굴조건을 유지하면서 평형상태에 도달한 후 전형적인 세굴공의 형태는 교각전면부에서 반원이고, 교각후면부에서는 반타원의 형태를 나타내었으며, 교각형상으로 인한 상대세굴심은 마름모일 때 가장 크게 나타났다. 최대 세굴심은 흐름이 교각과 부딪쳐서 하강류가 발생하는 지점인 교각전면부에 발생되었다. 이는 하강류가 교각 전면부에 세굴공으로부터 하상물질을 세굴공 외부로 이송시키는 역할을 하기 때문으로 판단된다. 마지막으로 본 실험을 통해 교각 후면부의 하류구간에서 교각에 의해 교란된 물의 흐름의 영향으로 인한 세굴공의 형상을 분석하여 보면 세굴공의 경사가 후면부에서는 완만하게 형성되어 있었고, 하류구간에는 세굴공에서 침식, 이동된 토사가 퇴적되어 하상이 원 하상고보다 높게 형성된 것을 관찰할 수 있었다.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.2
• /
• pp.17-21
• /
• 2008

The electroless plating of copper and tin were investigated for the fabrication of Sn-Cu bump. Copper and tin were electroless plated in series on $20{\mu}m$ diameter copper via to form approximately $10{\mu}m$ height bump. In electroless copper plating, acid cleaning and stabilizer addition promoted the selectivity of bath on the copper via. In electroless tin plating, the coating thickness of tin was less uniform relative to that of electroless copper, however the size of Sn-Cu bump were uniform after reflow process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.266-266
• /
• 2010

Ion beam sputtering(IBS)을 이용한 pattern 형성은 대상 물질의 제한이 적고 물리적 변수의 조절에 의해 쉽게 nano 구조의 형태와 크기를 조절할 수 있다는 점에서 관심을 받아오고 있다. 하지만 IBS를 이용한 pattern 형성이 어려운 물질들도 있어 다양한 기판에서의 nano pattern 형성에 관련된 많은 연구가 보고되고 있다. 본 연구발표에서는 유용한 반도체인 Si 표면에서의 IBS를 이용한 nano 구조 형성이 가능함과 그 과정에 대해 말하고자 한다. Ru을 100nm 두께로 증착시킨 Si(100)을 sputter 했을 때, Ru 표면에 잘 order된 nano pattern이 형성되었다. Sputter 시간이 증가하면서 pattern은 유지된 채 Ru이 깎여 나가다가 pattern의 가장 낮은 부분부터 Si기판이 드러나게 된다. 이 때 노출된 Si은 sputtering에 의해 깎여나가고 아직 Ru이 덮여있는 부분의 Si은 그대로 유지되어, Ru이 모두 sputter 되면서 보여지는 Si의 pattern은 Ru의 그것과 동일한 형태를 띄게 된다. 그 결과, Ru의 pattern이 Si으로 transfer되었음을 AFM과 SAM을 통해 확인할 수 있었다. 또한 IBS를 이용해 pattern 형성이 힘든 metallic glass에도 같은 방식으로 Ru을 쌓아 sputter 해봄으로써 pattern transfer를 확인해 볼 계획이다. 이러한 pattern transfer는 sputtering을 통한 pattern 형성이 어려웠던 다른 물질들에 그 가능성이 있음을 보여주고 있어 sputtering의 응용 폭이 넓어질 것을 기대한다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.317-322
• /
• 1999

Dens invaginatus is a developmental anomaly resulting from an invagination of the enamel organ. The incidence is highest with maxillary permanent lateral incisors. The reported occurrence ranges from 0.04 to 10%. This anomaly may involve the pulp and periapical tissues and cause pulpal inflammation, loss of vitality, apical and lateral periodontitis, periapical abscesses and cysts and stimulate internal resorption. Oehlers describes dens invaginatus as occurrence in three forms. In treating type 3 invaginatus, treatment strategy can be determined by considering the complexity and accessibility of invagination. In this case, showing simple invagination, it could be treated by simple endodontic treament confining to invagination without loss of vitality of tooth. After treatment of the present case, the results were as follows: 1. In type 3 dens invagiantus, if the tooth is vital and there is no evidence of communicating between invagination and pulp, we can save the vitality of the tooth and resolve the lesion by endodontic treament confining to the invagination. 2. In the invagination with opened apex, the closure of apex can be induced by apexification procedure doing this, we can avoid the neccessity of surgical intervention.

• Journal of Bio-Environment Control
• /
• v.28 no.1
• /
• pp.86-93
• /
• 2019

Plant growth and morphology are affected by light environments. The morphogenesis and growth of the plants growing in plant factories are different from those grown under sunlight due to the effect of far-red light included in sunlight. The objective of this study was to compare the morphogenesis and growth of cucumber plants grown under artificial sunlight, high pressure sodium lamp (HPS), and HPS with additional far-red light (HPS+FR). The artificial solar (AS) with a spectrum similar to sunlight was manufactured using sulfur plasma lamp, incandescent lamp, and green-reducing optical film. HPS was used as a conventional electrical light source and far-red LEDs were added for HPS+FR. The optical properties of each light source was analyzed. The morphogenesis, growth, and photosynthetic rate were compared in each light source. The ratio of red to far-red lights and phytochrome photostationary state were similar in AS and HPS+FR. There were significant differences in morphology and growth between HPS and HPS+FR, but there were no significant differences between AS and HPS+FR. SPAD was highest in HPS, while photosynthetic rate was higher at AS and HPS. Although the photosynthetic rate in HPS+FR was lower than HPS, the growth was similar in AS. It was because canopy light interception was increased by longer petioles and larger leaf areas induced by FR. It is confirmed that the electrical light with additional far-red light induces similar photomorphogenesis and growth in sunlight spectrum. From the results, we expect that similar results will be obtained by adding far-red light to electrical light sources in plant factories.

• Korean journal of food and cookery science
• /
• v.17 no.6
• /
• pp.598-603
• /
• 2001

Gel characteristics of potato starches which were prepared by steeping potato at 10$\pm$ 1$\^{C}$ and 25$\^{C}$$\pm$1$\^{C}$ incubator for 11days were investigated. Results of the instrumental test of potato starch gels showed significantly different strength, hardness, gumminess, chewiness, cohesiveness by steeping time. The light microscope and scanning electron microscope of starch gels showed three-dimensional network including macroporous structure by steeping. The syneresis of potato starch gel was decreased by steeping potato at 24 for 72 hours.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.536-545
• /
• 1997

The purposes of this study were to evaluate the degree of cavity cleanliness and to observe cavity wall morphology when root-end retrograde cavity preparation was done with ultrasonics. Root resections were done on 20 extracted human maxillary central incisors after canal filling with gutta-percha, and retrocavities were prepared using a slow-speed round bur as a control, and stainless steel ultrasonic tips of power settings of 2 and 6 ($Miniendo^{TM}$, EIE, SA, USA) as experimentals. The degree of the remaining cavity debris and smear layer, and wall morphology were evaluated under the scanning electron microscope. The results were as follows : Cavity prepared with ultrasonics of either power setting showed significantly less smear layer than did slow-speed preparations (p<0.01). However, there was no significant difference in canal debris (p<0.05). Cavity prepared with ultrasonics showed hatcheted appearance of wall, while slow-speed preparation showed relatively plain one.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.360-364
• /
• 2006

The gametophytes of Cyrtomium falcatum and Cyrtomium caryoptideum var. coreanum arising from spores were mechanically homogenized and cultured In vitro, to study their gametophyte ontogeny and sporophyte development. Homogenized gametophytic tissues formed as one-dimensional filaments after 2 weeks in culture and then glowed into blanched gamatophytes after 4 weeks. After 6 weeks, which were developed to two dimensional plates with apical notch and meristem in central zone. After 8 weeks in culture, apomictic buds were formed on the midribs without archegonium formation and these buds developed to sporophytes after 10 weeks in culture. Flow cytometric analysis of gametophytes and apomictic sporophytes revealed that both forms had the same ploidy level in C. falcatum and C. caryoptideum vu. coreanum, respectively. This is to certify that C. caryoptideum var. coreanum was an apomictic fern as well as C. falcatum.

• The Korean Journal of Pesticide Science
• /
• v.13 no.3
• /
• pp.177-184
• /
• 2009

This study was carried out to investigate infection process, symptoms and main component of the domestic silkworm, Bombyx mori. larvae and pupa infected with the entomopathogenic fungus Cordyceps, Paecillomyces tenuipes. The Cordyceps, Paecillomyces tenuipes, was highly infectious to the silkworms. A pathogenicities of Cordyceps, Paecillomyces tenuipes, may be highly virulent because of the low resistance or high susceptibility of the silkworms. The silkworm larva infected with Cordyceps formed phialospores on the phialides at the imperfect stage of the genus Cordyceps, But silkworm pupa infected with Cordyceps formed ascospores in the asci at the perfection stage of the genus Cordyceps. The results of analysis of health silkworm pupa and silkworm pupa infected with Cordyceps were obtained that amino acid, fatty acid, and nucleoside were very different.