• Restorative Dentistry and Endodontics
• /
• v.31 no.3
• /
• pp.179-185
• /
• 2006

This study was conducted to evaluate canal configuration after shaping by $ProTaper^{TM}$ with various rotational speed in J-shaped simulated resin canals. Forty simulated root canals were divided into 4 groups, and instrumented using by $ProTaper^{TM}$ at the rotational speed of 250, 300, 350 and 400 rpm. Pre-instrumented and post-instrumented images were taken by a scanner and those were superimposed. Outer canal width, inner canal width, total canal width, and amount of transportation from original axis were measured at 1, 2, 3, 4, 5, 6, 7 and 8 mm from apex. Instrumentation time, instrument deformation and fracture were recorded. Data were analyzed by means of one-way ANOVA followed by Scheffe's test. The results were as follows 1. Regardless of rotational speed, at the $1{\sim}2mm$ from the apex, axis of canal was transported to outer side of a curvature, and at 3~6 mm from the apex, to inner side of a curvature. Amounts of transportation from original axis were not sienifcantly different among experimental groups except at 5 and 6 mm from the apex. 2. Instrumentation time of 350 and 400 rpm was significantly less than that of 250 and 300 rpm (p<0.01). In conclusion the rotational speed of $ProTaper^{TM}$ files in the range of $250{\sim}400rpm$ does not affect the change of canal configuration, and high rotational speed reduces the instrumentation time. However appearance of separation and distortion of Ni-Ti rotary files can occur in high rotational speed.

• Korean Journal of Psychosomatic Medicine
• /
• v.29 no.1
• /
• pp.34-41
• /
• 2021

Objectives : The purpose of this study is to investigate the characteristics of depressive patients who admitted to general hospital. We examined the clinical characteristics of patients who were referred to the Department of Psychiatry as depressive symptoms, according to the type of consultation request, and comparing 'with re-consultation' and 'without re-consultation' groups. Methods : We performed a retrospective chart review of 4,966 inpatients who were referred to the Department of Psychiatry from August 2005 to December 2011. Results : For about 6 years, among the inpatients referred for psychiatric consultation, a total of 647 patients were referred for depressive symptoms, accounting for 13.82% of the total consultations. The average age of depressive patients was 58.6 years, which was higher than the average of 56.4 years of overall patients. Among the depressive patients, 275 patients were included in 'with re-consultation' group and there was no statistically significant difference when comparing 'with re-consultation' group and 'without re-consultation' group. However, there was a difference in the tendency of the two groups in the type of consultation request. 'With re-consultation' group was in the order of frequency of consultation type 3-2-1, whereas the 'without re-consultation' group was in the order of frequency of consultation type 2-3-1. Conclusions : The group of inpatients who were referred for depressive symptoms in general hospital showed the largest proportion of the group of patients referred to the Department of Psychiatry. 'With re-consultation' group had a higher rate of re-consultation due to the occurrence of new symptoms after hospitalization compared to 'without re-consultation' group. Therefore, doctors in each department and psychiatrists should pay attention to the depressive symptoms of inpatients and actively discuss treatment plans to improve the quality of medical services, identify risk factors, and make efforts to intervene early if necessary.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.65-73
• /
• 2011

Recently, researches to introduce the performance warranty contract are in progress for quality improvement of road pavements. The performance warranty contract is a type of contract in which contractors guarantee to maintain certain level of performance during a period from completion of construction. The contract use in Europe and the U.S is being increased because it has been known to contribute to improvement of structure quality, reduction of life cycle cost, development of construction techniques, and etc. The research on performance indicators, threshold values, and warranty durations is essential to effectively introduce the contract in Korea. In this study, literatures on the performance warranty contract for concrete pavements of the Minnesota, Indiana, and Florida of the U.S. were reviewed. Major distresses influencing the pavement performance were investigated and analyzed in the jointed concrete pavement sections of 21 Korean expressway routes to be compared to the performance indicators, threshold values, and warranty durations of the states. More accurate comparison is expected by investigation in planned sections for a long time.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.04a
• /
• pp.115-115
• /
• 2013

최근의 분진폭발은 플라스틱, 의약품, 목재, 곡물 저장고, 고체연료, 화학제품 제조공정 등을 포함하여 성형 및 가공 공정 등에서 화재폭발사고가 발생되고 있다. 폐목재를 재활용하여 PB(Particle board)를 생산하는 국내 제조사업장에서는 화재폭발 사고가 빈번히 발생하고 있어 예방대책이 요구되고 있다. 본 연구에서는 폐목재 제조공정의 사고예방과 목재분진 취급공정에 대한 안전대책 등을 제시하기 위하여 사고원인 물질인 폐목재 부유분진의 폭발특성실험을 실시하고 실험결과를 검토하였다. 또한 폐목재 분진의 화재폭발위험성을 상세히 평가하기 위하여 해당 물질의 자연발화점, 축열저장시험, 및 최소점화에너지 등의 화재폭발위험특성값을 실험적으로 조사하였다. 본 연구에서 사용한 폐목재 시료의 비구형 입자형태를 가지는데 입도분석기의 측정 결과 평균 입경은 $15.96{\mu}m$로 조사되었다. 또한 목재 분진의 함수율은 3.88%이며 중금속함유량은 1.73%이다. 자연발화점 측정결과 $225.5^{\circ}C$로서 비교적 낮게 측정되었고 퇴적분진에 대한 화재의 위험성은 높게 나타났다. 반면에 축열저장시험 결과를 통하여 공정관리 온도 및 보관온도를 $150^{\circ}C$ 이하로 관리하면 축열에 의한 자기분해 위험성은 낮은 것으로 판단되었다. 그러므로 축열에 의한 화재폭발 등의 위험성은 낮은 것으로 사료 된다. 최대폭발압력($P_{max}$)은 8.7 bar이며 폭발하한농도 (LEL)는 $60g/m^3$으로 나타났다. 부유분진의 폭발특성실험 결과 분진폭발지수(Kst)는 폭발등급 St 1 (0$bar{\cdot}m/s$)으로 나타났으며 폭발에 의한 위험성이 약한 분진으로 판정되었다. 최소점화에너지(MIE)는 10mJ < MIE <30mJ의 범위로 측정되었으며, 계산에 의해 추정된 최소점화 에너지(Es) 값은 14 mJ로서 일반적인 발화감도(Normal ignition sensitive)로 분류되었다. 이는 실질적인 점화원만 제거하여도 분진폭발을 예방할 수 있다는 것을 의미한다. 그러나 분진 폭발사고를 예방을 위하여 MIE값이 공정운전온도 $100^{\circ}C$ 초과 시에 급격히 낮아질 수 있으므로 운전 온도 설정에 있어서 주의가 필요하다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.153-160
• /
• 2020

The kinetic energy of the rain drops was predicted in a relation between the rain rate and rain quantity, derived directly from the rain drop size distribution (DSD), which had been measured by a disdrometer located in the eastern state of Alagoas-Brazil. The equation in the form of exponential form suppressed the effects of large drops at low rainfall intensity observed at the beginning and end of the rainfall. The kinetic energy of the raindrop was underestimated in almost rain intensity ranges and was considered acceptable by the performance indicators such as coefficient of determination, average absolute error, percent relative error, mean absolute error, root mean square error, Willmott's concordance index and confidence index.

• Journal of Ginseng Research
• /
• v.32 no.1
• /
• pp.26-32
• /
• 2008

A total of 29 Botrytis were isolated from ginseng gray mold at 8 locations in Korea from June to July, 2004 and 2005. The causative agent of them was identified as Botrytis cinerea based on morphological characteristics of conidia and RPB2 gene sequence analysis. In inoculation experiments with sclerotia, one isolate was pathogenic to ginseng plant whereas two isolates were non-pathogenic. Scanning electron microscopy revealed that the sclerotia of pathogenic isolate has rough surface and that of non-pathogenic isolate very smooth surface. Optimum temperature and culture conditions for sclerotia production were $5{\sim}20^{\circ}C$ and darkness, respectively. The number of sclerotia was increased tenfold on media added with 0.5% old stem fragment of ginseng.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.5
• /
• pp.77-83
• /
• 2008

In this study, land cover classification and NDVI evaluation for hazard mitigation precaution are carried out in surrounding areas of Yeongi-gun, Chungcheongnam-do ($132\;km^2$) where a project for multi-functional administrative city is promoted by government. Image acquired from KOMPSAT 2, LANDSAT and ASTER is utilized and comparative evaluation on limitation in classification based on resolution was carried out. The area mainly consists of arable land including mountains, rice fields, ordinary fields, etc thus special attention was paid to the classification of rice fields and ordinary fields. For the classification of image acquired from KOMPSAT 2, segmentation technique for classification of high-resolution image was applied. To evaluate the accuracy of the classification, field investigation was conducted to examine the sample and it was compared with the land usage and classification of land category in land ledger of Korea. Acquired results were made into theme map in shape file format and it would be of great help in decision making of policy for the future-oriented development plan of multi-functional administrative city.

• Applied Biological Chemistry
• /
• v.47 no.1
• /
• pp.85-91
• /
• 2004

In order to improve foxtail millet wine, a traditional Jeju cereal wine, fermentation characteristics of millet Yakju with different types of Nuruks prepared using isolated Aspergillus sp. and Rhizopus sp. were investigated. When the millet wine was brewed with the Nuruk prepared in this study, the combination ratio of wheat flour: barley : wheat bran : millet = 8 : 1 : 1 : 0 (pellet) showed the highest level of alcohol concentration, and a more favorable score than Kuksundang Nuruk in sensory evaluation. The main organic acids in millet wine were lactic and acetic acids, and the minor organic acids were fumaric, oxalic, citric and malic acids. Analysis of sugar compositions showed that glucose, arabinose, and maltose were present in decreasing order, and that xylose was also detected. Flavor components of millet wine were mainly iso-amyl, iso-butyl and n-propyl alcohols. Ethylacetate and acetadehyde were also detected. The contents of iso-butyl and n-propyl alcohols were higher in the millet wine prepared with Kuksundang Nuruk than those prepared with other Nuruks.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.6
• /
• pp.186-196
• /
• 1995

In this study, parameters such as unit cement weight and placing temperature which influence on temperature rise and temperature rise velocity are investigated through adiabatic tests for the domestic ordinary portland cement(0PC). Adiabatic temperature rise suggested by Korean Concrete Spec. are compared with that from this experimental results. As a result of this study, adiabatic temperature rise of OPC suggested spec. is overestimated. Also it is shown that 2-parameter equation suggested in the spec. overestimate heat evolution at early age and reasonable prediction of heat evolution can be obtained by using 3-parameter equation. Results of numerical analysis by using the input data from this test and the suggested values from spec. shows similar temperatures. However thermal stresses pridicted using input value from spec. may result 20% more than that from this test in case of externally restricted state.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.579-583
• /
• 2008

Web pages with complex layout and small font size do not display well on large screen display such as TV because it has limited capabilities: long distance view, passive user attitude, limited input device like a legacy remote controller. We have designed and implemented new semantic zoom browsing facilities to support effective navigation on Internet-connected digital television with limited capabilities. Our browser performs partitioning of an HTML document content into semantic blocks. Semantic blocks present summarized information with more readable style and modified layout for optimal reading and browsing. Individual blocks can be selected by the user and zoomed in more detail information by the user. The scrolling on large display device needs more user interaction. Our browser modifies the layout of an HTML document with removing horizontal scrolling and minimizing vertical scrolling. This method allows users to easily view the web page by converting into optimal reading style and layout and to easily seek the information just with zooming.