• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1164-1172
• /
• 2012

This study aims to make a "farmland use map" using high-resolution images and to analyze the land use change for about 8 years in Goyang, Namyangju, and Yongin cities. We have made a new numerical map named as a farmland use map using high-resolution images taken mostly in 2007 and digital topographical maps in Goyang, Namyangju, and Yongin cities near metropolitan areas to classify farmland use of paddy, upland, plastic film house, and orchard. We also made a land use map by overlaying the farmland use map and the land registration map of each city made in 2007, and compared the land use map made by RDA (Rural Development Administration) in 1999. Paddy areas decreased at a range of 3,000 to 5,000 ha during 8 years and were changed to residential areas in the cities. Upland and orchard areas also showed similar tendency and were changed to residential areas as well. On the other hand, the areas of the plastic film houses in the cities showed an increase or same in size. It is suggested that farmland use map can be broadly used as a base map for various survey projects including soil survey, statistics, and farmland information management.

• Science of Emotion and Sensibility
• /
• v.14 no.2
• /
• pp.207-220
• /
• 2011

The purpose of this study is to investigate sensibility words related with eco-friendly in the two media fashion magazines and internet newspapers and to analysis their appearance frequency and changes by the year through 1999~2010. Most frequently used words are 'nature, eco, cotton, natural fiber, health, fresh, clear, preservation, harmony, com fiber, and Lohas'. The words are divided in 4 groups: 'Nature/Environment, Material/Fiber, Human, and Adjectives/Micell'. A point of appearing time is analyzed: 'ecology, memory-shape material, organic, spa' were used before 2000, 'nature environment, eco-friendly, stretch material, wellbeing, substitute, recycling' were in 2000-2001, 'smart material, eco material, green' in 2002-2003, 'coolbiz, Lohas, natural dye' in 2004-2005, 'herb medicine, sustainable, warmbiz' in 2006-2007, 'greensumer, greenlife, solar energy, forest bath' in 2008-2009. Looking into their changes, in early 2000, the words of eco-friendly emotion and sensibility had appeared frequently relatively, but later on they decreased, and again recently increased showing highest appearing frequency. 'Nature/Environment' words have appeared recently very much, while 'Human' sensibility words have not changed much or decreased a little. 'Adjective/Micell' words has increased little bit recently. 'Material/Fiber' words showed decrease at fashion magazine, while they increased at the pages of internet news.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12A
• /
• pp.2109-2119
• /
• 2001

In this paper, a fast information extraction algorithm for object-based MPEG-4 application from MPEG-2 bit-steam is proposed. For object-based MPEG-4 conversion, we need to extract such information as object-image, shape-image, macro-block motion vector, and header information from MPEG-2 bit-stream. If we use the extracted information, fast conversion for object-based MPEG-4 is possible. The proposed object extraction algorithm has two important steps, namely the motion vectors extraction from MPEG-2 bit-stream and the watershed algorithm. The algorithm extracts objects using user\`s assistance in the intra frame and tracks then in the following inter frames. If we have an unsatisfactory result for a fast moving object, the user can intervene to correct the segmentation. The proposed algorithm consist of two steps, which are intra frame object extracts processing and inter frame tracking processing. Object extracting process is the step in which user extracts a semantic object directly by using the block classification and watersheds. Object tacking process is the step of the following the object in the subsequent frames. It is based on the boundary fitting method using motion vector, object-mask, and modified watersheds. Experimental results show that the proposed method can achieve a fast conversion from the MPEG-2 bit-stream to the object-based MPEG-4 input.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.9
• /
• pp.5-12
• /
• 2018

The foundation of the multi-span greenhouse structures is designed with small shallow concrete foundation considering mainly the vertical load. However, recently, due to an abnormal climate such as strong wind, horizontal load and up-lift load over design strength are applied to the foundation, causing safety problems of the greenhouse foundation. In order to reasonably evaluate the safety of greenhouse foundations, rotational and pullout stiffness expressed by the ground-foundation interaction should be evaluated, which also affects the safety of the upper structural members. In this study, three representative basic foundation types were selected by classifying greenhouse standards in Korea according to the shape, and the horizontal loading tests and theoretical calculation were performed for each foundation type. As a result of the comparison and analysis of the test and calculation, it was found that rotational resistance of the foundation is different according to the ratio of the contact area between the foundation and ground when the conditions of the foundation - ground contact surface and the mechanical properties of the ground are the same.

• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.1077-1087
• /
• 2015

The levee protect lifes, houses, and properties by blocking overflow of river. The revetment is forced to be covered on the slope of levee in order to prevent erosion. The stability of revetment is very important enough to directly connected to the stability of levee. In this study, the weak points of revetment on meandering channel were found by movable revetment experiment and the velocity and the water surface elevation (WSE) were measured at main points. The 3-D numerical simulations were performed under same conditions with experiment. And unclear flow characteristics by the limit of measuring instruments were analyzed through numerical simulation. Consequently, the section of large wall shear stress and the failure section are almost the same. Despite of small wall shear stress, the revetments located at right bank were carried away because of circulation zone due to secondary flow by meandering. With existing riprap design formula, the sizes of riprap determined using maximum local velocity were 1.5~4.7 times greater than them using mean velocity. As a result of this study, it is necessary to calculate the size of riprap in other ways for meandering and straight channel. At a later study, if the weighted value considered the radius of curvature and shape of hydraulic structure is applied to riprap design formula, it is expected that the size of revetment was evaluated rationally and accurately.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.3
• /
• pp.295-303
• /
• 2012

Clarify wind energy productivity depends on three factors: the wind probability density function(PDF), the turbine's power curve, and the air density. The wind PDF gives the probability that a variable will take on the wind speed value. Wind shear refers to the change in wind speed with height above ground. The wind speed tends to increase with the height above ground. also, Wind PDF refers to the change with height above ground. Wind analysts typically use the Weibull distribution to characterize the breadth of the distribution of wind speeds. The Weibull distribution has the two-parameter: the scale factor c and the shape factor k. We can use a linear least squares algorithm(or Ln-least method) and moment method to fit a Weibull distribution to measured wind speed data which data was located same site and different height. In this study, find that the scale factor is related to the average wind speed than the shape factor. and also different types of terrain are characterized by different the scale factor slop with height above ground. The gross turbine power output (before accounting for losses) was caculated the power curve whose corresponding air density is closest to the air density. and air desity was choose two way. one is the pressure of the International Standard Atmosphere up to an elevation, the other is the measured air pressure and temperature to calculate the air density. and then each power output was compared.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.685-690
• /
• 2001

This study was conducted to evaluate the quality of the commercial boiled-dried anchovies processed in Japan by determining chemical components and sensory evaluation. The moisture, salinity and acid-insoluble ash contents of the imported boiled-dried anchovies ranged $22.2\sim24.7\%,\;5.7\sim6.6\%\;and\;0.42\sim0.50\%$, respectively. By sensory evaluation, the imported boiled-dried anchovy was less than $5\%$ in breakage, whitish of yellowish in color and no foul smell in odor. Judging from the above results by Korean standard, the imported boiled-dried anchovy was classified into special grade. No difference in total amino acid and a major mineral contents were found between commercial boiled-dried anchovies processed in Korea and Japan. On the other hand, the lipid oxidation of the imported boiled-dried anchovy was inferior to the domestic boiled-dried anchovy sampled immediately after processing.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.3
• /
• pp.91-102
• /
• 2004

In this paper, a fast information extraction algorithm for object-based MPEG-4 application from MPEG-1,2 is proposed. For object-based MPEG-4 conversion, we need to extract such information as object-image, shape-image, macro-block motion vector, and header information from MPEG-1,2 bit-stream. If we use the extracted information, fast conversion for object-based MPEG-4 is possible. The proposed object extraction algerian has two important steps, namely the motion vector extraction from MPEG-1,2 bit-stream and the watershed algerian The algorithm extracts objects using user's assistance in the intra frame and tracks then in the following inter frames. If we have an unsatisfactory result for a fast moving object the user can intervene to connect the segmentation. The proposed algorithm consist of two steps, which are intra frame object extracting processing and inter frame tracking processing. Object extracting process is the step in which user extracts a semantic object directly by using the block classification and watersheds. Object tracking process is the step of the following the object in the subsequent frames. It is based on the boundary fitting method using motion vector, object-mask and modified watersheds. Experimental results show that the proposed method can achieve a fast conversion from the MPEG-1,2 bit-stream to the object-based MPEG-4 input.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.11
• /
• pp.245-253
• /
• 2011

Due to the imprudent spending of the fossil fuels, the environment was contaminated seriously and the exhaustion problems of the fossil fuels loomed large. Therefore people become taking a great interest in alternative energy resources which can solve problems of fossil fuels. The wind power energy is one of the most interested energy in the new and renewable energy. However, the plants of wind power energy and the traditional power plants should be balanced between the power generation and the power consumption. Therefore, we need analysis and prediction to generate power efficiently using wind energy. In this paper, we have performed a research to predict power generation patterns using the wind power data. Prediction approaches of datamining area can be used for building a prediction model. The research steps are as follows: 1) we performed preprocessing to handle the missing values and anomalous data. And we extracted the characteristic vector data. 2) The representative patterns were found by the MIA(Mean Index Adequacy) measure and the SOM(Self-Organizing Feature Map) clustering approach using the normalized dataset. We assigned the class labels to each data. 3) We built a new predicting model about the wind power generation with classification approach. In this experiment, we built a forecasting model to predict wind power generation patterns using the decision tree.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.6
• /
• pp.383-390
• /
• 2019

A helideck is one of the essential structures in offshore platforms for the transportation of goods and operating personnel between land and offshore sites. As such, it should be carefully designed and installed for the safety of the offshore platform. In this study, a structural design optimization method for a lightweight offshore helideck is developed based on a genetic algorithm and an attainable design set concept. A helideck consists of several types of structural members such as plates, girders, stiffeners, trusses, and support elements, and the dimensions of these members are typically pre-defined by manufacturers. Therefore, design sets are defined by collecting the standard section data for these members from the American Institute of Steel Construction (AISC), and integer section labels are assigned as design variables in the genetic algorithm. The objective is to minimize the total weight of the offshore helideck while satisfying the maximum allowable stress criterion under various loading conditions including self-weight, wind direction, landing position, and landing condition. In addition, the unity check process is also utilized for additional verification of structural safety against buckling failure of the helideck.