• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.345-345
• /
• 2011

최근 각종 하천 개발 사업이 활발히 진행되면서 하천환경변화에 따라 발생 가능한 다양한 현상 예측 및 그에 대한 대책수립이 요구되는 실정이다. 특히 하도안정 및 평면적 유로를 유지하기 위해서는 수제와 같은 수공 구조물이 효과적인 것으로 알려져 있다. 그러나 국내에서는 제한적인 연구와 소수의 수제 설치만 진행되었을 뿐 실용화를 위한 기술 개발 연구는 미흡한 실정이다. 단일 수제의 기하학적 특성에 의한 세굴 및 퇴적 등 하상의 변화에 관한 연구는 다수 진행되었으나 연속 수제에 대한 연구는 거의 없는 실정이다. 따라서 본 연구에서는 이동상 수리실험을 통하여 단일수제와 연속수제 설치에 따른 세굴깊이와 길이, 폭 등 하상변화의 기하학적 형상을 지배하는 월류비와 후루이드 수 등 수제설계 지배인자에 대한 특성을 검토하였다. 단일수제와 연속수제에 대하여 월류조건과 비월류조건의 경우로 분류하여 후루이드 수의 영향을 검토하였다. 실험분석 결과 후루이드 수와 월류비가 수제 설치에 따른 세굴 깊이, 세굴 길이 및 세굴 폭의 지배인자임을 확인하였다. 후루이드 수가 증가할수록 세굴깊이와 길이, 폭은 증가하는 것으로 나타났으나 월류비가 증가할수록 세굴깊이와 길이, 폭은 감소하는 것으로 나타났다. 연속수제의 경우 첫 번째 수제 주변의 하상변화는 단일수제와 그 규모가 유사한 것으로 나타났으나 두 번째 또는 세 번째 수제부터의 하상변화 규모는 첫 번째 수제에 비해 작아지는 것으로 나타났다. 또한 세번째 수제 이후 모든 수제에서의 하상변화 규모는 거의 일정한 것으로 확인되었다. 본 연구에서 제시한 하상변화 지배인자와 단일수제, 연속수제 별 세굴공의 기하학적 특성과의 관계는 하상의 안정성 확보를 위한 수제 설계를 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.6
• /
• pp.539-544
• /
• 2013

In this paper, we was designed three-dimensional face recognition algorithm using polynomial based RBFNNs and proposed method to calculate the recognition performance. In case of two-dimensional face recognition, the recognition performance is reduced by the external environment like facial pose and lighting. In order to compensate for these shortcomings, we perform face recognition by obtaining three-dimensional images. obtain face image using three-dimension scanner before the face recognition and obtain the front facial form using pose-compensation. And the depth value of the face is extracting using Point Signature method. The extracted data as high-dimensional data may cause problems in accompany the training and recognition. so use dimension reduction data using PCA algorithm. accompany parameter optimization using optimization algorithm for effective training. Each recognition performance confirm using PSO, DE, GA algorithm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.5
• /
• pp.32-40
• /
• 2002

The study of nonlinear gas transport in rarefied condition or associated with the microscale length of the geometry has emerged as an interesting topic in recent years. Along with the DSMC method, several fluid dynamic models that come under the general category of the moment method or the Chapman-Enskog method have been used for this type of problem. In the present study, on the basis of Eu's generalized hydrodynamics, computational models for diatomic gases are developed. The rotational nonequilibrium effect is included by introducing excess normal stress associated with the bulk viscosity of the gas. The new models are applied to study the one-dimensional shock structure and the multi-dimensional rarefied hypersonic flow about a blunt body. The results indicate that the bulk viscosity plays a considerable role in fundamental flow problems such as the shock structure and shear flow. An excellent agreement with experiment is observed for the inverse shock density thickness.

• Fire Science and Engineering
• /
• v.23 no.1
• /
• pp.55-62
• /
• 2009

A general combustion characteristics of forcing nonpremixed jet in laminar flow rates have been conducted experimentally to investigate the effect of forcing amplitude with the resonant frequency of fuel tube. There are two patterns of the flame lift-off feature according to the velocity increasing; one has the decreasing values of forcing amplitude on the lift-off occurrence when a fuel exit velocity is increasing, while the other has the increasing values. These mean that there are the different mechanisms in the lift-off stability of forced jet diffusion flame. Especially, the characteristics of attached jet flame regime are concentrically observed with flame lengths, shapes, flow response and velocity profiles at the nozzle exit as the central figure. The notable observations are that the flame enlogation, in-homing flame and the occurrence of a vortical motion turnabout have happened according to the increase of forcing amplitude. It is understood by the velocity measurements and visualization methods that these phenomena have been relevance to an entrainment of surrounding oxygen into the fuel nozzle as the negative part of the fluctuating velocity has begun at the inner part of the fuel nozzle.

• Solar Energy
• /
• v.18 no.3
• /
• pp.217-228
• /
• 1998

The purpose of this research is to investigate the characteristics of static and total pressure distribution in the upward free water jet system impinged on a downward flat plate. The rectangular nozzle was used and its contraction and aspect ratio was five and about seven respectively. Experimental conditions considered were jet velocity, distance between nozzle and flat plate, height of supplementary water. It was founded that pressure distribution on the flat plate had the Gaussian curve when the pressure at stagnation point and impinging half width were chosen as the scaling parameters. The maximum pressure was shown at the stagnation point. The central impingement velocity decreased with the increment of distance between nozzle and flat plate, and its slop of decay was similar to that of chracteristics decay region in the three-dimensional free jet.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.2
• /
• pp.105-117
• /
• 2004

In each industry field, many engineers have tried to develop integrated environments using information technology. The core technology in building integrated environments is the database based on standardized information. To meet the requirements, this study builds a database with detailed design information as a part of integrating digital information generated from every work of steel bridges. The data model used to build the database was developed based on the international standard, namely ISO/STEP. The data model is classified into geometric and non-geometric parts to represent the design information of steel bridges. The geometric parts are represented by a three dimensional solid model so that they may be able to reuse existing information. Also, the non-geometric parts represent information requirements that are analyzed by the development method of standard data model. To verify the data model, this study validates the syntax of the model on EXPRESS Engine and verifies the validation of the model by applying the design data of Hannam bridge to the database.

• Journal of Sasang Constitutional Medicine
• /
• v.29 no.2
• /
• pp.95-103
• /
• 2017

Objectives This study was aimed to analyze characteristics of facial shapes in adult women by sasang constitution using hyungsang classification. Methods Using a digital camera, we took a picture of 1,011 women who participated in clinical study on menstrual pain and acquired their 3D facial images with a face-only scanner. They filled out SSCQ-P(sasang constitution questionnaire for patient) for the diagnosis of sasang constitution. Based on the above photographs and 3D images, one of the hyungsang medicine specialist diagnosed according to five diagnostic criteria. The sasang constitution was diagnosed by referring to questionnaires and photographs. Frequency analysis was performed using the statistical analysis system version 9.4 and chi-square test was performed for validity evaluation. Results In taeeumin, the wide face shape(n=261, 74.36%) was much more than the narrow shape(n=90, 25.64%) and the convex face profile(n=164, 85.86%) was much more than the concave profile(n=27, 14.14%). Regardless of sasang constitution, angular face shape(n=501, 50%) was the most, followed by oval shape(n=317, 31.64%). Subjects with big ears(n=291, 29.19%) were the most, while big eyes(n=104, 10.43%) were the least. Subjects with eyes and nose tip upward(n=615, 78.05%) were the most, while eyes and nose tip downward(n=22, 2.79%) were the least. Conclusions Most Korean adult women have angular face, such as square or diamond, with slanted eyes and upturned nose. Taeeumin women have wide facial shape and convex profile.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.91-99
• /
• 2020

Post-installed anchors were widely used due to its workable benefits. Regarding the resistance performance of anchors, the critical edge distance is presented to minimize the impact of concrete splitting. In the case of actual anchors, however, it is difficult to obtain the ideal edge distance. The purpose of this study is to identify resistance performance and behavior characteristics that contain complex elements such as concrete crack occurring under tensile load. Tensile tests were conducted based on the standard method. Failure shape and the resistance characteristics that do not have the critical edge distance were derived by tensile load. Parametric analysis according to the boundary condition was performed to simulate the actual tensile behavior, through a nonlinear finite element model based on the specimen. Consequently therefore, verifying analysis results the resistance mechanism can be applied through boundary conditions.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.4
• /
• pp.56-65
• /
• 2001

The structural model of midship section is within the scope of STEP AP218. It supports to represent the ship structure, but most of shipyards and classification societies exchange the information using 2D drawings at the present. To translate the 2D information into the ship structure model of STEP AP218, we analyze the 2D midship section information of KR-TRAS of Korean Register of shipping, and include the transverse members information with the 3D model. We also define the mapping table and the mapping relationships between two data structures. With this mapping table we develop the translator for the midship section, and visualize the translated ship structure model using a STEP viewer. The ship structure model can be used to exchange information between design departments, and through the lifecycle of design, analysis, and maintenance.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.5
• /
• pp.34-45
• /
• 1997

In this paper, we present hardware implemcntation of self-organizing feature map (SOFM) neural networkwith constant adaptation gain and binary reinforcement function on FPGA. Whereas a tnme-varyingadaptation gain is used in the conventional SOFM, the proposed SOFM has a time-invariant adaptationgain and adds a binary reinforcement function in order to compensate for the lowered abilityof SOFM due to the constant adaptation gain. Since the proposed algorithm has no multiplication operation.it is much easier to implement than the original SOFM. Since a unit neuron is composed of 1adde $r_tracter and 2 adders, its structure is simple, and thus the number of neurons fabricated onFPGA is expected to he large. In addition, a few control signal: ;:rp sufficient for controlling !he neurons.Experimental results show that each componeni ot thi inipiemented neural network operates correctlyand the whole system also works well.stem also works well.