• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.4
• /
• pp.11-20
• /
• 1989

마이크로 일렉트로닉스(Microelectronics)를 중심으로 하는 산업혁명이 진행되고 있는 시점에서 전자, 광학 또는 신소재 부품에 대한 형상과 치수 또는 표면거칠기에 대한 정확도와 정밀도가 엄격하게 요구되고 있다. 예를 들어 경취 재료인 반도체의 웨이화( w-afer), 수정진동자 자기헷트, 비구면렌즈 또는 연질 금속의 레이저빔(Laser Beam) 프린터 용 포리곤 밀러(Polygon Mirror), 자기디스크, 복사기용 드럼(drum), 레저기기용 반사밀러 등 가공정밀도를 향상시키기 위해서는 과거의 가공기술을 대치할 수 있는 새로운 초정밀가공 기술의 도입이 활발하게 진행되고 있다. 경취성 재료의 초정밀가공은 지금까지는 랩핑(lappi- ng), 폴리싱(polishing)의 가공기술이 주체였으나, 최근의 엄격한 부품정밀도에 대응하기 위하여 전가공을 초정밀 연삭가공으로 평면도,표면거칠기, 가공변질층을 향상시키고 다듬질 가공은 폴리싱으로 하여 표면거칠기를 향상시켜야 하는 가공기술이 보급되고 있다. 일반연질 금속의 다듬질가공은 유리지립을 이용하는 랩핑이나 폴리싱으로 다듬질 가공을 진행하고 있었 으나 형상정도와 표면정밀도를 동시에 얻는다는 것이 어렵고 또 가공시간이 너무 길어서 매우 고가인 것이 되고 말았다. 그러나 유리에서 연질금속으로 재료를 전환시키고 저가격화, 양산 화의 요구, 정밀도 향상과 부품의 안정화 등등 여러 이유로서 다아아몬드(Diamond) 공구로 mirror surface 를 만드는 초정밀 경면연삭 가공기술(precision turning with diamond)의 발달 로 이제는 완전히 새로운 가공기술로 대치되고 말았다. 다이아몬드에 의한 초정밀절삭은 공구 끝이 매우 예리하고 마모가 매우 적은 단결정 다이아몬드를 이용하고 절삭가공 기계는 운동정도 를 피가공물에 정확히 전사 시키는 방법이며 따라서 가공기계는 고도의 운동정밀도가 요구되며 그외에 강성, 진동, 열변이, 제어면에서 엄격한 검도가 있어야 한다.

• Clean Technology
• /
• v.19 no.3
• /
• pp.212-218
• /
• 2013

The microparticles of 2-hydroxypropyl-${\beta}$-cyclodextrin (HP-${\beta}$-CD) were prepared using aerosol solvent extraction system (ASES) by employing supercritical carbon dioxide as an antisolvent, The effects of various process parameters such as temperature, pressure, solution concentration and solution flow rate on the formation of HP-${\beta}$-CD microparticles were investigated. The HP-${\beta}$-CD microparticles prepared by the ASES process were observed to consist of agglomerates of nano-sized (50-200 nm) particles. When an aqueous solution of ethanol was used as a solvent for HP-${\beta}$-CD, the HP-${\beta}$-CD particles were found to be spherical in shape and to become larger as the water content increased. It was confirmed that the micronization of HP-${\beta}$-CD using the ASES process could enhance the inclusion efficiency of ibuprofen/HP-${\beta}$-CD complexes significantly.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.224-229
• /
• 2019

Seat of automobile is required to support the comfort to driver and passenger during the driving. The control method of the seat position is changed from manual type to power type, which means using the motor to increase the comfort of the driver. By using the motor, several problems, such as vibration, noise, and over-current, appeared. These problems can be reduced through the control of seat motor. In this study, a control technology of four control variables, which determine profile of the input voltage applying to the seat motor, is proposed to generate the current profile having soft-start and soft-stop. The current flowing through the coil by input voltage is described by mathematical modeling of power seat. It is confirmed that optimized current profile having soft-start and soft-stop can be generated from simulation using the mathematical model.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.05a
• /
• pp.116-120
• /
• 2005

부품피더(Parts Feeder)는 부품들을 일정한 정렬형식에 맞게 적정 설정 속도로 공급함을 기본목적으로 하는 공급장치로서 산업현장에서 요구사양에 따라 어떠한 메카니즘으로 구조물을 설계할 것인지를 결정하는 것이 대단히 중요하다. 부품피더의 설계 및 제작은 정렬하고자 하는 부품의 형상, 무게, 정렬자세 및 공급속도에 따라 설계자 및 제조사마다 여러 가지 패턴의 메커니즘으로 제작될 수 있다. 본 논문에서는 실린더형의 특정 부품을 수직으로 정렬하는 부품피더의 정렬부 구조를 중심으로 실제 설계 및 제작을 수행한 과정 및 결과를 기술하였다.

• Composites Research
• /
• v.31 no.5
• /
• pp.192-201
• /
• 2018

The use of 3D printing for rapid tooling and manufacturing has promised to produce components with complex geometries according to computer designs and it is emerging as the next generation key of manufacturing. Due to the intrinsically limited mechanical/electrical properties and functionalities of printed pure polymer parts, there is a critical need to develop 3D printable polymer composites with high performance. This article gives a review on 3D printing techniques of polymer composite materials and the properties and performance of 3D printed composite parts as well as their potential applications in the various fields.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.813-816
• /
• 2013

National Radio Research Agency(RRA) has legislated technical regulations of telecommunication equipments. These technical regulations are related to safety of operators and users, service quality, accessibility for the disabled, interoperability and network connection of terminal equipment. Also, RRA drives the establishment or amendment of technical regulations for terminal equipment considering the evolution of ICT technicology and diversification of services. In 2013, RRA researched the amendment of technical regulations in relation to terminal equipment, which are related to the measurement frequency for signal band power, unwanted signal power, pulse shape.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2430-2435
• /
• 2015

In order to achieve high flexibility in manufacture, analysis of chip's shape is one of the most important problems. This paper describes the change of machining characteristics in workpiece materials depending on turning clearance angle. The experiments start from choosing three workpiece materials that are SM45C(machine structural carbon steel), STS303(stainless steel), SCM415 (chrome-molybdenum steel). Then, the experiments show specifically how features of selected materials changed when they were processed with diverse machining depths and with feed rate starting from fixed rotational speed. Especially, the experiments were also analyzed in chip's shape and wear of insert tip. In conclusion, these experiments show that chip's shape was changed by quality of the materials, depth of cut, and conveying speed. When machining feedrate and machining depth were 0.10mm/rev and 0.3mm respectively, workpiece materials showed the best shapes, not categorizing quality of the materials and machining characteristics.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.505-507
• /
• 2021

Image recognition technology is a technology that recognizes an image object by using the generated feature descriptor and generates object feature points and feature descriptors that can compensate for the shape of the object to be recognized based on artificial intelligence technology, environmental changes around the object, and the deterioration of recognition ability by object rotation. The purpose of the present invention is to implement a power management framework required to increase profits and minimize damage to livestock farmers by preventing accidents that may occur due to the improvement of efficiency of the use of livestock house power and overloading of electricity by integrating and managing a power fire management device installed for analyzing a complex environment of power consumption and fire occurrence in a smart safety livestock house, and to develop and disseminate a safe and optimized intelligent smart safety livestock house.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.1807-1812
• /
• 2014

A plastic has a various advantages in engineering elements that it can be formed a curve surface without restriction of shape and product the high volume with various color and lower price. Also, it is being used for many parts of automobile as the weight of cars is getting lighter. The Door A-Fuel Filler is a automobile plastic part by injection molding production. The injected products are involved a lot of factors for the inferior goods after painting. Therefore the painted products are required to have the process of the polishing in order to eliminate the faults. Now polishing process is being worked by hands. The workers tend to evade the process of polishing because the working needs a lot of powers momentarily. This paper presents the development of auto-polishing system that can check the inferior goods by the vision system and control the polishing process by the motion system. As a result, Shorten production time (30 seconds), and decreases by 1 person to work to increase the competitiveness of the production cost was to expect improvement.

• CDE review
• /
• v.2 no.1
• /
• pp.33-36
• /
• 1996

승용차 산업과 같이 정밀 부품이 요구되는 산업에 있어서 가장 기초가 되고도 중요한 것은 시작금형에 해당하는 정밀 목형 제작이라고 할 수 있다. 부품의 개발은 일반적으로 설계과정, 도면화 과정, 시제품 개발과정, 시제품 성능시험과정, 양산체제 구축과정 등의 순서를 밟는다. 이 과정 중에서 시제품 개발과정은 설계에 의해서 만들어진 제품이 실제 설계자의 의도와 일치하는지를 확인하는 과정이다. 이 과정에서 부품 간의 간섭, 치수나 형상의 확인, 기능 혹은 성능상의 문제점 등을 검토하여 양산체제시에 발생할 수 있는 문제점 등을 최대한 제거하여야 한다. 그런데 시제품 제작에 걸리는 기간이 개발과정 중에서도 비교적 큰 부분을 차지하고 있어 이의 단축이 시급한 실정이다. 현재 시제품 제작업체들 중에서 프레스 금형을 위한 판넬 수지가공에는 3D CAD/CAM을 많이 적용하고 있지만, 주물 소재용 목형제작은 대부분 숙련된 기술자의 수작업에 의존하고 있다. 따라서 개발기간 단축과 비용절감이라는 완성차 업계의 요구와는 거리가 있는 실정이다. 당사는 이미 실린더 헤드, 매니홀더, 트랜스밋션 케이스, 헤드커버, 실린드블럭 등 자동차 엔진의 핵심부품들의 목형을 3D CAD/CAM을 이용하여 생산하고 있기 때문에 이중 트랜스밋션 케이스의 목형제작 과정을 소개하고자 한다.