• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.9
• /
• pp.825-834
• /
• 2008

Nose chine shape optimization study has been performed to maximize the directional stability at high angle of attack supersonic flow. Various chine shapes are generated using super ellipse equation. By numerically investigating the directional stability characteristics of those shapes, the baseline configuration for the shape optimization has been selected using the three-dimensional Navier-Stokes equations. The configuration is represented by the NURBS curves which can adjust the surface geometry by the control points. The response surfaces are constructed to obtain optimum shape which has high directional stability characteristics and lift-to-drag ratio. From this study, an efficient configuration design and optimization process which utilizes the parameter-based configuration generation techniques and approximation method has been established, then 29% improvement of the directional stability by strong vortexes from chine nose is accomplished.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.117-126
• /
• 2011

This study investigates the physical properties and manufacturing method of shape memory fabric for emotional garment made by polypropylene. For this purpose, polypropylene(PP) POY and SDY were texturized using low temperature and constant length heat treatment texturing technologies, respectively. The shape memory fabrics made using these texturized PP yarns were woven with two kinds of PET and PTT shape memory yarns on the air-jet loom and the various physical properties of four kinds of shape memory fabrics were measured and discussed. The tenacity and breaking strain of PP texturized yarns treated by low temperature and constant length heat treatment showed high weaving efficiency and the wet thermal shrinkage of PP textured yarns was shown less than 1.5%, dry thermal shrinkage was ranged between 3% and 5%, which means thermal stability compared to the PTT textured yarn with high thermal shrinkage, 5~8%. The shape memory characteristics of PP shape memory fabrics measured by Toray method showed five grade as same value as PTT shape memory fabric. The heat keeping property of the PP shape memory fabric showed 56% higher value than that of PTT shape memory fabric. The water repellency of PP shape memory fabric measured by spray method showed five grade as same value as PTT shape memory fabric treated with water repellent agent. Especially, shape memory properties of PP shape memory fabric measured by 3-D image and camera measurement methods showed similar characteristics to the PTT shape memory fabric.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.3
• /
• pp.293-299
• /
• 2011

To study the flow characteristics of water-based $Al_2O_3$ nanofluids according to the shape of the nanoparticles, we measure the pressure drop in a fully developed laminar flow regime. Water-based $Al_2O_3$ nanofluids of 0.3 Vol.% with sphere-, rod-, platelet-, and brick-shaped nanoparticles are manufactured by the two-step method. Zeta potential is measured to examine the suspension and dispersion characteristics, and TEM image is considered to confirm the shape characteristics of the nanoparticles. The experimental results show that the pressure drop of $Al_2O_3$ nanofluids depends on the shape of the nanoparticles although the nanofluids has same volume fraction of nanoparticles. This is explained by the surface area per unit mass of the nanoparticles and the size of the nanoparticles suspended in the base fluids.

• Journal of Korea Water Resources Association
• /
• v.43 no.4
• /
• pp.399-408
• /
• 2010

The sensitivity of Nash model parameters is analyzed about characteristic velocities considering geomorphological dispersion in the present study. And changing shape of IUH compared and analyzed as variation of characteristic velocities through numerical experiment. Application watersheds are selected 4 subwatersheds which are located at main stream of Bocheong basin. The mean and variance of hillslope and stream path length are estimated in each watershed with GIS. And Nash model parameters are estimated with moments of path lengths and characteristic velocities. The changing trend about IUH which is derived Nash model parameters are compared as variation of characteristic velocities. The Major results of this study are summarized as follows. The Nash model parameters sensitively present changes about hillslope characteristic velocity. And the effect of the peak discharge and shape of recession in IUH dominate with hillslope's characteristic velocity, the effect of the peak time and shape of ascension in IUH dominate with channel's characteristic velocity.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.11a
• /
• pp.224-227
• /
• 2000

본 논문에서는 기준 영상으로부터 면의 반사특성을 검출하고, 구해진 반사특성을 임의의 물체에 적용하여 3매의 명암영상을 얻는다. 이 영상을 측광입체시법(photometric stereo method)에 적용하여 3차원 형상인식하는 방법을 제시한다. 본 연구에서 목적으로 하는 물체의 반사특성은 난반사(diffuse reflection)성분과 전반사(specular reflection)성분이 혼합된 혼합 반사면(hybrid reflectance surface)을 그 대상으로 하며, 이러한 면의 반사특성은 Torrance-sparrow모델로 가정하여 문제를 해결해 나간다. 본 연구에서 목적으로 하는 대상 물체는 동일한 재질로 이루어졌다는 가정 하에서 몇개의 표본점들을 취해 반복수치 계산하기 때문에 계산속도가 빠르며, 각 표본점들로부터 계산된 면특성 파라메터들의 평균값을 취해서 다시 Torrance-sparrow모델에 적용함으로써 측광입체시법의 해석을 가능토록 한다. 즉, 3차원 형상인식 과정시 계산된 면특성 파라메터를 사용해 생성한 참조표와 명암영상과의 비교에 의해 빠른 면방향 복구를 행할 수 있다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.640_641
• /
• 2009

본 논문에서는 6MW급 BLDC Motor의 슬롯형상을 변화시켜 코깅토그와 공극에서의 자속밀도, 저장 에너지를 해석하고, 슬롯형상의 중앙에 설계변수를 주어 공극에 흐르는 자속의 변화를 계산하여 분석 하였다. 폭길이는 최소화에 기준을 두었으며 Parameter는 LHS를 이용한 샘플링 포인트 기법을 사용하여 최적의 조건에 가장 알맞은 최적점를 찾아내어 특성해석을 하였다. 최종적으로 고용량에서의 슬롯형상변화에 따라 코깅토크를 최소화하는 최적화 설계를 위하여 이번 특성해석 연구를 하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.621-621
• /
• 2013

ZnO는 수열합성법을 사용하여 저비용으로 일차원 형태의 잘 정렬된 nanowire의 제작이 가능하며 높은 화학적, 열적 안정성을 가져 전계 방출 소자로써 많은 연구가 진행되고 있다. 본 연구는 수열합성법에 사용되는 ZnO 전구체(Zinc Nitrate, HMTA, PEI & Ammonium Chloride), 안정제(Ethanolamine)의 농도에 따른 ZnO의 형상 변화와 이에 따른 전계방출 특성을 비교 분석하였다. 전구체의 농도 변화에 따라 ZnO Film, Rod, Tip과 같은 형상 변화를 확인 할 수 있었으며, 안정제를 사용함으로써 고종횡비를 가지는 ZnO Tip을 제작하였다. 제작된 ZnO 에미터의 전계방출특성을 고진공 챔버에서 측정하였고, 에미터 형상이 전계방출에 미치는 영향을 비교 분석하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.106-109
• /
• 2010

구조시스템의 동적 특성은 구조 모델 업데이트, 구조 헬스 모니터링, 구조 제어 분야에서 기초자료로 활용되기 때문에 많은 연구자들의 관심을 받고 있다. 본 논문에서는 부유식구조물의 축소모형을 대상으로 진동실험을 수행하였으며, 계측한 실험데이터로부터 고유진동수와 모드형상을 추출하였다. 실험에서 구한 진동특성 결과는 유한요소 모델의 결과와 비교하였으며, 계측한 모드형상과 수치해석으로 계산된 모드형상의 상관관계를 수록하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.721-727
• /
• 2021

In this paper, aerodynamic characteristics of missile configuration with various grid fins in subsonic flow. To investigate the effects of grid fin shape, four types of experimental models were used. In addition, to examine aerodynamic characteristics of missile configurations with various grid fins according to effects of Reynolds numbers and configurations of grid fins, 6-components aerodynamic forces and moments were measured by internal balance in wind tunnel test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.8-14
• /
• 2011

In this paper, the combustion characteristics of hybrid rocket fuel with tapered grain port were investigated experimentally. The charging efficiency of convergent and divergent port shape fuel with $1^{\circ}$ taper angle was 6.8% higher than that of cylindrical port shape fuel. The regression rate was increased about 17.5% by using the convergent port shape fuel. On the other hand, in case of divergent port shape fuel, no notable difference of regression rate was observed when compared to that of the cylindrical port shape fuel. In the case of convergent port shape fuel, characteristic velocity and its efficiency were notably increased with respect to cylindrical port fuel. It was found that convergent port shape of hybrid rocket fuel can lead to a better option compared to the conventional cylindrical port in terms of combustion efficiency and performance improvement.