• Korean Journal of Materials Research
• /
• v.10 no.1
• /
• pp.34-40
• /
• 2000

The $Pb_{0.94}Y_{0.04}[(Zr_{0.6}Sn_{0.4})_{0.915}Ti_{0.085}]O_3$ ceramics which corresponded to the antiferroelectric-ferroelectric phase boundary composition were prepared for digital-type-piezoelectric/electrostrictive device application. Their dielectric, field-induced polarization (P) and strain (X) behaviors were studied with variations in sintering condition and excess PbO content. The orthorhombic structure of specimens was hardly affected either by excess PbO addition or sintering temperature. With increasing excess PbO content, grains tended to be smaller and rounded ones, and the optimum sintering temperature was lowered. Excess PbO addition stabilized the antiferroelectric phase of the specimen effectively, which was confirmed by P-E and X-E analyses. Also the digital-type-strain character was found to be enhanced despite of slight increase in phase transition (AFE-FE) field and electrical resistivity, and decrease in maximum strain. These results were explained in terms of possible lattice defects and domain wall motion.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.9
• /
• pp.784-793
• /
• 2017

A two-axis gimbal-type X-band antenna mounted on an observation satellite can efficiently transmit high-capacity image data to a ground station regardless of both the satellite position and the orbital motion. However, this X-band antenna induces unnecessary micro-jitter which can degrade the image quality of the high-resolution observation satellite. Therefore, to achieve the high-resolution image quality from the observation satellite, micro-jitters have been required to be isolated. In this study, to resolve aforementioned drawback, we proposed blade gear using a shape memory alloy (SMA) applied to azimuth stage of X-band antenna. To investigate the rotational basic characteristics of the proposed SMA blade gear, we performed rotational static loading test. Futhermore, to evaluate the cycle to failure of the gear, accelerated life test was conducted. The temperature test was conducted to confirm rotational basic characteristics at various temperature conditions. To verify the isolation performance for micro-jitter, we performed micro-jitter measurement test.

• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.400-409
• /
• 2007

Morphology of methane/propane clathrate hydrate crystal was investigated under different undercooling conditions. After the water pressurized with compound guest gas was fully saturated by agitation, medium within the vessel was rapidly undercooled and maintained at the constant temperature while the visual observations using microscope revealed detailed features of subsequent crystal nucleation, migration, growth and interference occurring within liquid pool. The growth of hydrate was always initiated with film formations at the bounding surface between bulk gas and liquid regions under all tested experimental conditions. Then a number of small crystals ascended, some of which settled beneath the hydrate film. When undercooling was relatively small, some of the settled crystals slowly grew into faceted columns. As the undercooling increased, the downward growth of crystals underneath the hydrate film became dendritic and occurred with greater rate and with finer arm spacing. The shapes of the floating crystals within liquid pool were diverse and included octahedron and triangular or hexagonal platelet. When the undercooling was small, the octahedral crystals were found dominant. As the undercooling increased, the shape of the floating crystals also became dendritic. The detailed growth characteristics of floating crystals are reported focused on the influences caused by undercooling and memory effect.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.349-359
• /
• 2006

Objective: Nickel-titanium alloy wire possesses excellent spring-back properties, shape memory and super-elasticity. In order to adapt this wire to clinical use, it is necessary to bend as well as to control its super-elastic force. The purpose of this study is to evaluate the effects of heat treatment on the load-deflection properties and transitional temperature range (TTR) of nickel-titanium wires. Methods: Nickel-titanium wires of different diameters ($0.016"\;{\times}\;0.022"$, $0.018"\;{\times}\;0.025"$ and $0.0215"\;{\times}\;0.028"$) were used. The samples were divided into 4 groups as follows: group 4, posterior segment of archwire (24 mm) without heat treatment; group 2, posterior segment of archwire (24 mm) with heat treatment only; group 3, anterior segment with bending and heat treatment; group 4, anterior segment with bending and 1 sec over heat treatment. Three point bending test was used to evaluate the change in load-deflection curve and obtained DSC (different scanning calorimetry) to check changes in $A_f$ temperature. Results: In the three point bending test, nickel-titanium wires with heat treatment only had higher load-deflection curve and loading and unloading plateau than nickel-titanium wires without heat treatment. Nickel-titanium wires with heat treatment had lower Af temperature than nickel-titanium wires without heat treatment. Nickel-titanium wires with heat treatment and bending had higher load-deflection curve than nickel- titanium wires with heat treatment and nickel-titanium wires without heat treatment. Nickel-titanium with heat treatment of over 1 sec and bending had the highest load-deflection curve. Nickel-titanium wires with heat treatment and bending had lower Af temperature, Nickel-titanium wires with heat treatment of over Af sec and bending had the lowest Af temperature. Conclusion: From the results of this study, it can be stated that heat treatment for bending of Nickel-titanium wires does not deprive the superelastic property but can cause increased force magnitude due to a higher load-deflection curve.

• Progress in Medical Physics
• /
• v.20 no.2
• /
• pp.80-87
• /
• 2009

Phase transformation, superelastic characteristics and variation of surface residual stress were studied for Nitinol shape memory alloy through application of UNSM technology, and life extension methods of stent were also studied by using elastic resilience and corrosion resistance. Nitinol wire of ${\phi}1.778$ mm showed similar surface roughness before and after UNSM treatment, but drawing traces and micro defects were all removed by UNSM treatment. It also changed the surface residual stress from tensile to compressive values, and XRD result showed less intensive austenite peak and clear martensite and additional R-phase peaks after UNSM treatment. Fatigue resistance could be greatly improved through removal of surface defects and rearrangement of surface residual stress from tensile to compressive state, and development of surface modification system to improve not only bio-compatability but also resistance to corrosion and wear will make it possible to develop vascular stent which can be used for circulating system diseases which run first cause of death of recent Koreans.

• Geophysics and Geophysical Exploration
• /
• v.1 no.2
• /
• pp.127-135
• /
• 1998

The Born approximation is widely used for solving the complex scattering problems in electromagnetics. Approximating total internal electric field by the background field is reasonable for small material contrasts as long as scatterer is not too large and the frequency is not too high. However in many geophysical applications, moderate and high conductivity contrasts cause both real and imaginary part of internal electric field to differ greatly from background. In the extended Born approximation, which can improve the accuracy of Born approximation dramatically, the total electric field in the integral over the scattering volume is approximated by the background electric field projected to a depolarization tensor. The finite difference and elements methods are usually used in EM scattering problems with a 2D model and a 3D source, due to their capability for simulating complex subsurface conductivity distributions. The price paid for a 3D source is that many wavenumber domain solutions and their inverse Fourier transform must be computed. In these differential equation methods, all the area including homogeneous region should be discretized, which increases the number of nodes and matrix size. Therefore, the differential equation methods need a lot of computing time and large memory. In this study, EM modeling program for a 2D model and a 3D source is developed, which is based on the extended Born approximation. The solution is very fast and stable. Using the program, crosshole EM responses with a vertical magnetic dipole source are obtained and the results are compared with those of 3D integral equation solutions. The agreement between the integral equation solution and extended Born approximation is remarkable within the entire frequency range, but degrades with the increase of conductivity contrast between anomalous body and background medium. The extended Born approximation is accurate in the case conductivity contrast is lower than 1:10. Therefore, the location and conductivity of the anomalous body can be estimated effectively by the extended Born approximation although the quantitative estimate of conductivity is difficult for the case conductivity contrast is too high.

• Journal of Korean Philosophical Society
• /
• v.105
• /
• pp.49-74
• /
• 2008

Le but de notre recherche est $d^{\prime}{\acute{e}}clairer$ la nature du $d{\acute{e}}passement$ de soi aux actes humaines dnas le Thomisme. Dans le Thomisme la nature humaine qui a la raison et la $volont{\acute{e}}$ a une $intentionnalit{\acute{e}}$ ver la fin ultime. De sorte que les actes humaines qui $corr{\grave{e}}spondent$ cette nature humaine a un $caract{\grave{e}}re$ du $d{\acute{e}}passement$ de soi visant toujours plus que le $pr{\acute{e}}sent$. Le fondement de cet acte du $d{\acute{e}}passement$ de soi est $l^{\prime}{\hat{a}}me$ rationelle qui est la forme substantielle de l'homme et de soi subsistante. Chez st. Thomas ce $caract{\grave{e}}re$ du $d{\acute{e}}passement$ a trois ${\acute{e}}taps$ distinctes : (1)le $d{\acute{e}}passement$ dans l'ordre du $progr{\grave{e}}s$ naturel (2)le $d{\acute{e}}passement$ de soi dans l'ordre morale (3)le $d{\acute{e}}passement$ de soi dans l'ordre de la religion. Le $d{\acute{e}}passement$ dans l'ordre du $progr{\grave{e}}s$ naturel apparaît d'abord au $caract{\grave{e}}re$ de $l^{\prime}{\hat{a}}me$ rationelle. St. Thomas $d{\acute{e}}finit$ les vertus rationelles comme $^{\prime}pl{\acute{e}}nitude$ dans le $f{\acute{e}}blesse$, parce qu'il $consid{\grave{e}}re$ la vertu rationelle comme $finalit{\acute{e}}$ des $facult{\acute{e}}s$ du sens $ext{\acute{e}}rieur$. L'homme par le sens $ext{\acute{e}}rieur$ reçoit des $esp{\grave{e}}ces$ sensibles(especies sensibilis), et $poss{\grave{e}}de$ les images. Puis cette images sensible devenant la $r{\acute{e}}alit{\acute{e}}$ spirituelle sous forme du $m{\acute{e}}moire$ et du souvenir, devient aussi la partie de son existence. Donc chez st. Thomas la vertue rationnelle n'est pas simplement un $facult{\acute{e}}$ $sp{\acute{e}}culative$, mais elle est dans l'ordre du devenir et du $pl{\acute{e}}nitude$. A cette raison st. Thomas compare la raison(ratio) comme $g{\acute{e}}n{\acute{e}}ration$(generatio) et l'intelleigence(intellectus) comme ${\hat{e}}tre$(esse). C'est-${\grave{a}}$-dire la raison $d{\acute{e}}passe$ le sensible et l'intelligence $d{\acute{e}}passe$ la raison. Le $d{\acute{e}}passement$ de soi dans l'ordre morale $li{\acute{e}}$ au $progr{\grave{e}}s$ de la conscience. Chez st. Thomas la perception de l'objet $ext{\acute{e}}rieur$ ayant pour but d'avoir conscience de soi, se perfectionne ${\grave{a}}$ ceci. D'avoir conscience de soi signifie d'avoir $l^{\prime}identit{\acute{e}}$ de soi, et de-$l{\grave{a}}$ apparaît l'acte moral en tnat qu'acte $sp{\acute{e}}cifique$ humain. La raison pour laquelle la vie morale elle-$m{\hat{e}}me$ a un $caract{\grave{e}}$ du $d{\acute{e}}passement$, c'est que l'acte humaine qui corresfonde ${\grave{a}}$ $l^{\prime}identit{\acute{e}}$ du soi est une vie qui vise toujours plus que le $pr{\acute{e}}sent$ ou $l^{\prime}id{\acute{e}}al$. Quant au problem du $d{\acute{e}}passement$ dans l'ordre de la religion, chez st. Thomas en raison de $l^{\prime}affinit{\acute{e}}$ entre Dieu et l'homme, $o{\grave{u}}$ il y a des vertues infuses(virtutes infusas), il y a une sorte du $d{\acute{e}}passement$ religieux. Car ces vertues infuses signifie la communication entre Dieu(${\hat{E}}tre$ absolu) et l'homme(${\hat{e}}tre$ fine) et cela signifie le $d{\acute{e}}passement$ de l'humain vers le divin. Cette $id{\acute{e}}e$ thomiste permet de penser que $o{\grave{u}}$ il y a un $d{\acute{e}}passement$ de soi dans la vie religuse d'une personne, il y a une intervention $r{\acute{e}}elle$ de la providence divine. Cette $pens{\acute{e}}e$ thomiste sera alors un $caract{\grave{e}}$ $r{\acute{e}}aliste$ face ${\grave{a}}$ la $pens{\acute{e}}e$ $id{\acute{e}}aliste$ qui n'admette que le $d{\acute{e}}passement$ absolu comme $d{\acute{e}}passement$ religieux.