• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.1
• /
• pp.50-58
• /
• 2000

Experiments were carried out to obtain the effects of nozzle configuration and jet to jet spacing on the heat transfer characteristics of single line of circular water jets impinging on a constant heat flux plane surface. The nozzle configurations are Cone type, Reverse cone type and Vertical circular type, and the nozzle arrays are single jet(nozzle dia. 8 mm), 1 row of 3 jets and 1 row of 5 jets. Jet velocities ranging from 3m/s to 8m/s were investigated for the nozzle to target plate spacing of 80 mm. For the Cone and Reverse cone type nozzle arrays, the average Nusselt number of 1 row of 5 jets was larger than that of 1 row of 3 jets at Re$_{D}$<45000, but that of 1 row of 3 jets was larger than that of 1 row of 5 jets at $Reo\le45000$. For the Vertical circular type nozzle, however, the average Nusselt number of 1 row of 3 jets was larger than that of 1 row of 5 jets at all jet velocities. In the condition of fixed mass flow rates, the maximum heat transfer augmentation was obtained for 1 row of 5 jets and was over 2 times larger than that of the single jet for all nozzle configurations. The nozzle configurations that produce the maximum average Nusselt number are as follows: For 1 row of 3 jets, the Vertical circular type at $Reo\le45000$ and the Reverse cone type at $Reo\le45000$. But, they are the Reverse cone type at Re$_{D}$<55000 and the Vertical circular type at$Reo\le55000$ for 1 row of 5 jets.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.106-112
• /
• 2021

In this study, we performed a design and structural analysis of a blade-shaped antenna installation on the rear fuselage of a rotary wing aircraft operated by the military. When the structure is damaged while the aircraft is in operation, it is separated from the aircraft main structure and may collide with the rotor or blades to cause the aircraft to crash. Therefore, structural safety for the modified structure must be secured. The design requirement for the newly installed modified part were established, and the load condition was constructed by applying the load that may occur in the aircraft after the modification. Structure safety for the modified structure was secured by performing structure analysis. To analysis stress and deformation of aircraft structure, we developed finite element model and verified it by using hand calculation method. We confirmed the safety of the modified structure through the final structural integrity analysis.

• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.153-162
• /
• 2021

In this article, the design of a variable F-number and triple magnification infrared optical system is described. That is a two-in-one optical system that combines an infrared search and track (IRST) system and an electro-optical tracking system (EOTS), where an afocal optical system is added to the IRST optical system designed already. The performance target is determined by analyzing system performance, and then the specification in the optical system design is calculated. This optical system contains a warm stop making it possible that one optics has two different F/# by cutting the size of aperture, and that is designed to suit this optics. The system satisfies the requirement such as a modulation transfer function (MTF). For operational assessment, the movement of the focusing lens group is analyzed over the change of temperature and target distance. By using this optical system, it is possible to develop equipment having two functions, infrared searching and electro-optical tracking.

• Composites Research
• /
• v.34 no.4
• /
• pp.212-225
• /
• 2021

Metal matrix composites (MMCs) were widely used in various industries, due to the excellent properties: high strength, stiffness, wear resistance, hardness, thermal conductivity, electrical conductivity, etc. With additive manufacturing (AM) technology rapidly developed, AM MMCs have been actively investigated thanks to the cost- and time-saving manufacturing. However, several issues still need to be addressed before fabricating AM MMCs. Here, several types of MMCs were introduced and MMCs' design methods to tackle the issues were suggested in a powder bed fusion (PBF) technique. The paper could come up with a guideline for the material and process design of MMCs in the PBF technique.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.310-315
• /
• 2021

In the case of weapon systems used by the military, defense standards are applied for economical and efficient procurement, management, and maintenance. Defense specifications are documents describing procedures and methods for determining whether technical requirements for products and services are consistent and apply to the production of weapon systems, quality assurance, and configuration management. Software is also subject to defense specifications, and is documented and managed in the same way as other defense specifications. Sometimes it happened to be standardized without some(or all) software. In this case, a competitive contract is impossible and it may affect the quality of weapon systems because the manufacturer arbitrarily changes the software without prior approval. So, software standardization is required, but it is very difficult to verify for firmware installed in hardware. This paper proposed a verification method for g software standardization, and we expect it will contribute to the efficient production and quality assurance of weapon systems.

• Journal of Internet Computing and Services
• /
• v.23 no.1
• /
• pp.95-103
• /
• 2022

The goal of education and training in military is to foster strong combatants who can fight and defeat enemies. The Korean military is deeply aware of the importance of education & training, and has been introducing various advanced training systems so far. Despite these efforts, however, the military environment to maintain and strengthen the level of training is becoming increasingly difficult. In this study, it was conducted on the effectiveness analysis and utilization of the game system for military education & training through literature review. As a result of literature analysis, the introduction of the game system could be expected to have various effects throughout the cognitive and behavioral areas. Based on this effect analysis, the concept and shape of game system operation for each purpose were derived, and an improved plan using the game system was proposed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.4
• /
• pp.360-369
• /
• 1988

This experiment was carried out to investigate the heritabilities, genetic correlations, path-coefficients, selection indexes and genetic advances for the desirable characteristics of naked-barley (Hordeum vulgare L.) in the central region of Korea. Genetic advances were calculated from selection indexes for each characters. It was considered that selection efficiency was increased in case it was calculated from the combination of two or three characters. These characters should be very useful agronomic characters for selection because they could be measured and counted easily, and thus it is also possible to save labour and expenses.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.411-411
• /
• 2022

보는 수로나 하천의 수위를 조절하고 취수 등의 편의를 제공하기 위해 건설되는 하천 구조물이다. 일반적인 보(고정보)는 상시 담수 되어 농업용수, 생활용수, 공업용수 등의 취수원으로 활용되지만, 최근에 설치되는 보(가동보)들은 수문을 설치하여 필요에 따라 수위를 조절할 수 있게 되어 있다. 이와 같은 보의 운영은 보 상류의 유속, 수심, 흐름 특성, 하천 형상 등의 변화를 발생시킨다. 특히 하류 보는 운영현황에 따라 하천 흐름에 직접적인 영향을 주기 때문에 하천 흐름 특성에 핵심적인 요소로 볼 수 있다. 따라서 이에 대한 모니터링이 필요하며 이에 따른 수위-유량관계를 규명할 필요가 있다. 본 연구에서는 함평천 유역에 위치한 함평군(영수교)관측소를 대상으로 하류 약 1.3km에 위치한 개량형 공압식 가동보의 2021년 기립각도 변화에 대한 보 모니터링을 실시하여 수위-유량관계 변화를 분석하였다. 2021년에는 가동보의 기립각도 변화 및 취수조건에 따라 총 37회의 수위관측 및 유량측정을 하였으며 총 29회의 가동보의 기립각도를 계측하였다. 2021년 전반기에는 부분개방1, 부분개방2, 부분개방3, 완전개방, 취수조건으로 기간 분리되었고 후반기에는 완전개방, 부분개방3, 부분개방4, 부분개방5 조건으로 가동보의 기립각도에 따라 총 6개의 기간분리가 발생하였다. 결과적으로 본 연구에서는 하류 가동보 운영현황에 대한 보 모니터링과 흐름 특성이 변화하는 기간의 유량측정성과 확보를 통해 신뢰도 높은 수위-유량관계곡선식을 개발하였고 이를 통해 생산된 유량자료는 정확도가 매우 높은 것으로 분석되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.409-409
• /
• 2021

하천 내의 식생은 발달시기에 따라 휴지기, 성장기, 소멸기로 구분되며 각 시기에 따라 수위-유량관계곡선에 많은 전이가 발생한다. 이러한 식생의 성장과 소멸 뿐만 아니라 하도와 하안영역의 식생 군락의 밀도 증감에 따라서도 다양한 형태의 수위-유량관계곡선식의 전이가 발생한다. 식생의 성장기에는 식생의 밀도가 서서히 증가하여 수위-유량관계곡선식의 (-)전이가 발생하며, 식생의 소멸기에는 식생의 밀도가 서서히 감소하여 수위-유량관계곡선식의 (+)전이가 발생한다. 식생에 의한 수위-유량관계곡선식의 변동성은 식생의 성장과 소멸뿐만 아니라 하도와 하안영역의 식생 군락의 식생 밀도 역시 많은 영향을 끼치고 있다. 우리나라의 강우는 특정기간(6월~10월)에 집중되는 경향으로 인하여 식생의 성장과 소멸에 따른 수위-유량관계곡선식의 변동성 확인이 용이하였다. 그러나 최근 과거와 다른 형태의 강우패턴으로 인한 하천의 단면형상 변화로 인하여 하도와 하안영역의 식생영향이 감소하는 경향이 발생하고 있다. 이러한 단면변화로 인하여 하천 내의 하안영역과 식생 밀도 감소에 따른 수위-유량관계곡선식의 변동성이 발생하였다. 본 연구에서는 만경강 유역에 위치한 완주군(소양용연교)관측소를 대상으로 2018년과 2020년의 식생밀도와 식생 및 하도 모니터링을 통한 수위-유량관계 변화를 분석하였다. 2018년에는 식생의 활착, 성장, 소멸에 따라 다양한 기간분리가 발생하였으며, 2020년에는 식생의 활착, 성장, 소멸 뿐만 아니라 홍수 전후 식생 밀도 감소에 따른 기간분리가 추가로 발생하였다. 2020년은 과거와 달리 집중호우가 장기간(약34일)발생하였으며 그에 따라 홍수 전후 단면변화가 과거에 비해 매우 큰 것으로 확인되었다. 이로 인해 2018년과 2020년 측정성과 검토 결과 유사한 수위에서 약 3배의 유량차가 발생하였다. 결과적으로 본 연구에서는 하천 내의 식생밀도 변화로 흐름 특성이 변화하는 기간의 유량측정성과 확보를 통한 신뢰도 높은 수위-유량관계곡선식을 개발하였고 이를 통해 생산된 유량자료는 정확도가 매우 높은 것으로 분석되었다.

• The Korean Journal of Pharmacology
• /
• v.23 no.2
• /
• pp.101-111
• /
• 1987

We investigated the binding properties of $(^3H)$ QNB and $(^3H)$ NMS to mAchR to elucidate the characterstics of mAchR in rat brain by using two different preparations (homogemates & intact brain cell aggregates). The binding properties of both ligands demonstrated high affinity and saturability in both experiments, however $(^3H)$ QNB showed a significantly higher maximal binding capacity than tha ot $(^3H)$ NMS 1. In rat brain homogenates; Displacement of both lignands with several mAchR antagonists resulted in competition curves in accoradnce with the law of massaction for QNB, atropine & scopolamine in thie preparation, also a similar profile was found for the quaternary ammonium analogs of atropine & scopolamine (methyl atropine & methylscopolamine) when $(^3H)$ NMS was used to label the receptors in rat brain. But when these hydrophillic antagonists were used to displace $(^3H)$ QNB, they showed interaction with high- and low-affinity binding sites in brain homogenates. Pirenzepine, the nonclassical mAchR antagonist, was able to displace both ligands from binding sites in this preparation. 2. In intact rat brain cell aggregates; Intact bain cell aggregates were used to elucidate the binding characteristics of $(^3H)$ NMS to mAchR in rat. The magnitude of binding of this ligand was related linearly to the amount of cell protein in the binding assay with a high ratio of total to nonspecific binding. mAchR antagonists displaced specific $(^3H)$ NMS binding according to the law of mass-action, while it was possible to resolve displacement curves using mAchR agonist into high-& low-affinity component. 3. Our results indicate that more hydrophilic receptor ligand $(^3H)$ QNB, displacement experiments in both tissues demonstrated that the lipid solubility of a particulr mAchR ligand might play an important role in determining its profile of binding to the mAchR, and the concentrations of mAchR in rat brain are both on the cell surface (membrane-bound receptor) and in the intracelluar membrane (intermembrane-bound receptor). 4. The results are discussed in terms of the usefulness of dissociated intact rat brain cells in studying mAchR in central nervous system.