• 제목/요약/키워드: 형상관(刑象觀)

Search Result 542, Processing Time 0.028 seconds

A Design Optimization on Coupling Joint between Exhaust Chimney of Electricity Generator and Electromagnetic Pulse (EMP) Shield (EMP 차폐를 위한 비상발전기 연도의 최적 형상 결정)

  • Pang, Seung-Ki;Kim, Jae-Hun
    • Journal of Energy Engineering
    • /
    • v.24 no.4
    • /
    • pp.159-165
    • /
    • 2015
  • The article presents a parametric study on geometrical design optimization for coupling the joint between a large exhaust air chimney and electromagnetic pulse (EMP) shield for gas turbine electricity generator. We conducted computational fluid dynamics (CFD) simulations on hydraulic diameters of waveguide below cutoff(WBC) ranges 800mm~1025mm, the connection distance ranges 150~450mm, and exhaust gas flow velocities at 15, 20, and 25m/s. The results show that the diameter of main chimney, connection distance, and exhaust gas velocity had impacts on flow stream at the EMP shield. To provide a fully developed stream line at three different flow velocity cases, the WBC diameter and distance of connection should be larger than 1050mm and longer than 300mm, respectively.

Prediction and Design of Edge Shape of Initial Strip for Thick Tube Roll Forming using Finite Element Method (유한요소해석을 이용한 후육관 롤포밍에서의 초기소재 에지 형상 예측과 설계)

  • Kim, Nak-Su;Lee, Seung-Yun
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.26 no.4
    • /
    • pp.644-652
    • /
    • 2002
  • Increasing demands for Electric Resistance Welded pipes of high quality with thick wall require c lose investigations in edge deformation by slitting, strip deformation during break down farming, and difference of circumferential length. In order to obtain good quality of a welding zone, it is necessary to predict the edge shape of the initial strip. The modeling of the multi-pass thick tube roll forming process with rigid plastic finite element method ultra the edge shape prediction of an initial strip with 2nd-degree polynomial regression method are presented. Edge shapes of initial strip have been analyzed by the finite element method and designed by the regression method to satisfy the requirements in target fin pass. It is concluded that the proposed edge design method results in optimal edge shapes sat string the design requirements.

CFD Analysis on the Flow Uniformity of a $CO_2$ Enrichment System (CFD를 이용한 온실 $CO_2$ 시비 시스템의 유량 균일성 해석)

  • Yim, Kyungjin;Kim, Hongjip;Lee, Sangmin;Park, Kyoung-Sub
    • Journal of Bio-Environment Control
    • /
    • v.22 no.2
    • /
    • pp.123-130
    • /
    • 2013
  • $CO_2$ enrichment systems have been recently used to shorten the growth period of plants and the improvement of harvest and its quality. To accomplish these goals, manifold should be designed to supply the same amount of $CO_2$. In this study, CFD approach has been used to understand the effects of geometric parameters, such as tube and hole diameters. An optimized geometry has been derived through pipe and tube part, respectively. As a result, the deviation of flow rate less than 0.1 g/s was expected at all holes of the $CO_2$ enrichment system.

Study on induction air swirl in D.I. diesel engine (직접분사식 디젤기관의 흡입공기 선회강도에 대한 고찰)

  • 고춘식
    • Journal of the korean Society of Automotive Engineers
    • /
    • v.9 no.3
    • /
    • pp.16-22
    • /
    • 1987
  • 직접분사식 디젤기관의 성능과 배기가스 문제에 여향을 주는 실린더 내에서의 연소형태는 크게 연료분사계와 흡입공기 유동계 두 가지에 의해 결정된다. 즉 분사율, 부사시기, 분무형태와 같은 분사계의 특성과 공기선회, 스퀴시(squish), 난류와 같은 공기 유동 특성에 의하여 연소형태가 결 정된다. 이러한 복잡한 연소형테를 기관 특성에 맞게 조정한다는 것은 대단히 어려운 문제인데 이것은 연료화 공기의 혼합이 연소실형상과 흡기계의 형상에 큰 영향을 받으며 연료가 액체 상 태로 연소실내로 들어와 분무과정을 통하여 증발이 되어야만 연소가 가능하기 때문이다. 특히 흡입공기 유동계에 있어서 현재의 직접 분사식 대젤기관의 흡입구 형상은 흡입공기의 운동에너 지에 모멘트를 가하여 연소실내에서 공기의 선희(swirl)를 발생시켜 줌으로써 연료와 공기의 혼 합기를 형성시키는 Helical type이 많이 이용되고 있다. 그러나 기관 성능과 배기가스 특히 NOx는 상반관계를 이루기 때문에 연소실내로 들어오는 흡입공기의 선희강도(swirl ratio)를 너무 강하게만 한다고 하여 좋은 결과를 얻을 수는 없다. 따라서 설계하고자 하는 각 기관에 있어서 요구되는 성능과 배기가스 문제를 만족하는 흡입공기의 선희강도가 얻어질 수 있도록 흡입구 형상을 설계한다는 것은 많은 연구와 경험이 요구되고 있다. 본 자료에서는 직접분사식 디젤기 관에 있어서 흡입공기의 최적 선희강도에 대한 설정방법과 흡입구 형상 설계를 위한 설계 이론 및 정상류 Rig test상에서의 흡입공기 선희강도의 평가방법을 소개하고자 한다.

  • PDF

An essay on the theory of power of Saint Paul : Salvation through the system of a nation (사도 바울의 권력론에 대한 리쾨르의 해석 : 제도를 통한 구속에 대한 해석학적 시론)

  • Kim, Sun-ha
    • Journal of Korean Philosophical Society
    • /
    • v.143
    • /
    • pp.47-65
    • /
    • 2017
  • This paper is an attempt to explain the interpretation of P. Ricoeur on the theory of power of Saint Paul. P. Ricoeur tried to reinterpret Saint Paul's thoughts on the power of a nation, the purpose being to link this theory to salvation through the social system. Ricoeur expands this interpretation of political power to the economy and culture. The basis of these ideas is the 'imago Dei' namely the image of God. I would like to consider the image of God as the key to salvation through social system, politics, economy, and culture.

Estimation of Heritabilities and Genetic Correlations on Preweaning Body Weights and Postweaning Traits in Swine (돼지의 이유전체중(離乳前體重)과 이유후형질(離乳後形質)에 대한 유전력(遺傳力)과 유전상관(遺傳相關)의 추정(推定))

  • Han, Sung Wook;Sang, Byung Chan;Lee, Han Ok
    • Korean Journal of Agricultural Science
    • /
    • v.14 no.1
    • /
    • pp.51-60
    • /
    • 1987
  • The study was conducted to estimate the heritabilities, genetic and phenotypic correlations on preweaning body weight and postweaning traits. The data analysis were the record of 253 male pigs produced from 54 boars of Landrace, Hampshire, Large Yorkshire and Duroc purebreds raised at National Animal Breeding Institute from 1978 to 1983. The results obtained in this study are summarized as follows. 1. The heritabilities of body weight at birth, 21days and 56days were $0.233{\pm}0.160$, $0.485{\pm}0.185$ and $0.758{\pm}0.214$, respectively, and the heritabilities estimated on postweaning traits were $0.270{\pm}0.164$ for average daily gain, $0.350{\pm}0.174$ for feed requirement, $0.272{\pm}0.165$ for backfat thickness, $0.887{\pm}0.221$ for days to 90Kg and $0.565{\pm}0.195$ for selection index. 2. Genetic correlations of body weight at birth with 21 days and 56 days were 0.349 and 0.19& and body weight at 21 days with 56 days was 0.907, and daily gain with feed requirement, backfat thickness, days to 90 Kg and selection index were -0.552, 0.107, -0.903 and 0.716, and feed requirement with backfat thickness, days to 90Kg and selection index were -0.058, 0.699 and -0.942, and backfat thickness with days to 90 Kg and selection index were -0.237 and -0.025, respectively. 3. Phenotypic correlations of body weight at birth with 21 days and 56 days were 0.342 and 0.287, and body weight at 21 days with 56 days was 0.893 and daily gain with feed requirement, backfat thickness, days to 90Kg and selection index were -0.062, 0.093, -0.651 and 0.540, and feed requirement with backfat thickness, days to 90Kg and selection index were 0.105, 0.601 and -0.613, and backfat thickness with days to 90Kg and selection index were -0.040, -0.416, respectively.

  • PDF

A Study on Enhanced Tubes for Electric Utility Steam Condensers (발전소 수증기 응축기용 전열 촉진관에 대한 연구)

  • Kim, Nae-Hyun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.7
    • /
    • pp.31-41
    • /
    • 2016
  • A computer program that simulates electric utility steam condensers was developed, and used to investigate the effects of enhanced tubes in steam condensers. The replacement of smooth tubes with enhanced tubes reduces the steam condensing temperature, and increases the efficiency of the electric utility. Therefore, a significant amount of power may be reserved without any modification of the utility. Three enhanced tubes, corrugated, low fin with internal ribs, and low fin with internal 3-D roughness, were considered. The results showed that there is an optimal internal roughness height. Low fin tubes with a 3-D roughness were superior to the other enhanced geometries. This was attributed to longitudinal vortices generated between the circumferential dimples. An additional 0.5 MW~1.3 MW was possible when smooth tubes were replaced with enhanced tubes in the 600 MW electric utility condenser. The additional power increased with increasing coolant temperature. More investigations on fouling, corrosion, and mechanical properties will be necessary for actual applications of enhanced tubes in electric utility condensers.

The Estimate of Air Content in the Reservoir Water intake Facilities (저수지 취수시설 공기관 내 공기량 산정식에 관한 고찰)

  • Yun, Dong-Koun;Jo, Jin-Hoon;Kim, Jin-Taek;Han, Guk-Heon;Lee, Seung-Oh
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.174-174
    • /
    • 2012
  • 최근 농업용저수지의 경우 기상이변에 따른 수위조절을 위하여 다량의 수문을 일시에 개방하는 사례가 지역적으로 증가하고 있는 추세이다. 그에 따라 당초 목적인 농업용수를 위한 취수시설이 최근 홍수조절용으로 활용됨에 따른 취수시설 내 공동현상이 발생하고 있다. 이러한 공동현상으로 인해 수시설물의 안정성에 문제가 발생하고 그에 따른 2차 재해위험이 있을 수 있다. 따라서 본 연구에서는 공동현상 방지를 위해 취수시설 공기관 설계기준에 대하여 고찰하였다. 공동현상을 방지하고 홍수량을 적절하게 배제하기 위해서 유입되는 공기량산정식이 필요하다. 공기관 단면결정은 농업생산기반정비사업 설계기준(필댐)의 구조설계 부분에 정리되어 있지만 이는 이수측면에서 설계 및 시공이 진행됨에 따라서 취수에 대한 목적을 달성하기에는 어려움이 있다. 따라서 취수시설의 기능과 역할을 증대시키고자 취수시설 적정 공기관 설계를 분석하여 향후 신규, 개보수 및 현장 유지관리에 활용하기 위한 기초자료를 제시하였다. 이러한 공동현상 및 공기관 설계를 위하여 현장조사, 수치해석, 수리모형시험을 병행하여 문석하였다. 그 결과 취수탑의 형상변수와 수위에 대한 수치해석을 수행하여 변수가 소요공기량에 미치는 영향은 조절게이트 개폐율을 증가시킬수록 소요공기량이 증가하며, 약 80%의 개폐율에서 소요공기량이 최대가 되었다. 방수로 직경이 증가하면, 공기관 입구와 끝단의 압력차가 감소하여 소요공기량이 감소하고, 수위가 증가하면 소요공기량이 증가하는 것으로 분석되었다. 따라서 공동현상 방지를 위해 공기량 산정식은 취수터널에 연직수문이 설치되어 있는 6가지 흐름의 형태에 따라서 $/Q_w=0.04(F-1)^{0.85}$, $Q_a/Q_w=K(F-1)$, $Q_a/Q_w=0.014(F-1)^{1.4}$, $Q_a/Q_w=0.015(F-1)^{1.4}$의 관계식 중 적정한 것을 사용하여야 할 것으로 판단되며, 또한 공기관에 유입부의 허용부압은 수두로부터 1.0m이하로 하고, 공기관 내 풍속은 $45^m/s$를 기준으로 최대 $90^m/s$로 하여야 할 것으로 판단된다.

  • PDF

Anatomical Comparisons of Compression, Opposite, and Lateral Woods in New Zealand Radiata Pine(Pinus radiata D. Don) (뉴질랜드산(産) 라디아타소나무의 압축이상재(壓縮異常材), 대응재(對應材) 및 측면재(側面材)의 해부학적(解剖學的) 특성(特性) 비교(比較))

  • Eom, Young-Geun;Butterfield, Brian G.
    • Journal of the Korean Wood Science and Technology
    • /
    • v.25 no.2
    • /
    • pp.88-99
    • /
    • 1997
  • 뉴질랜드산(産) 라디아타소나무의 수간(樹幹) 및 지재(枝材)에 발달(發達)되어 있는 압축이상재(壓縮異常材), 대응재(對應材) 및 측면재(側面材)의 해부학적(解剖學的) 특성(特性)을 광학현미경(光學顯微鏡), 주사전자현미경(走射電子顯微鏡) 그리고 투과전자현미경(透過電子顯微鏡)을 이용하여 조직학적(組織學的) 및 구성요소(構成要素)의 수량적(數量的) 측면(側面)에서 비교(比較), 검토(檢討) 하였다. 조직학적(組織學的)인 면(面)에서 볼 때 춘재(春材)로부터 추재(秋材)로의 가도관(假導管) 이행(移行)은 대응재(對應材)나 측면재(側面材)보다 압축이상재(壓縮異常材)가 훨씬 더 점진적(漸進的)이었다. 편심생장(偏心生長)으로 인해 연륜폭(年輪幅)은 압축이상재(壓縮異常材)가 가장 컸고 그 다음이 측면재(側面材) 및 대응재(對應材)의 순이었으며 추재솔(秋材率) 역시 압축이상재(壓縮異常材)가 대응재(對應材) 및 측면재(側面材)보다 컸다. 횡단면상(橫斷面上) 가도관(假導管) 형상면(形狀面)에서 압축이상재(壓縮異常材)가 원형(圓形)을 나타내는 반면 대응재(對應材)와 측면재(側面材)는 각형(角形)을 띠고 있었다. 또한 압축이상재(壓縮異常材)에서만 가도관(假導管)의 세포벽(細胞壁)에 나선강(螺旋腔)과 나선열(螺旋裂) (helical cavity and check), 슬릿(slit)형(形) 벽공구(壁孔口)가 존재(存在)하였으나 $S_3$층(層)이 결여(缺如)되어 있었으며 굴곡(屈曲)된 선단(先端)과 불규칙(不規則)한 형상(形狀)의 가도관(假導管) 및 세포간극(細胞間隙)이 자주 관찰(觀察)되었다. 직교분야(直交分野) 벽공(壁孔)은 압축이상재(壓縮異常材)가 가문비나무형(型) 그리고 대응재(對應材) 및 측면재(側面材)는 소나무형(型) 벽공(壁孔)을 나타냈다. 수량적(數量的) 특성(特性) 면에서 볼 때 가도관(假導管)의 길이는 압축이상재(壓縮異常材)가 가장 짧고 측면재(側面材)가 가장 길었으며 가도관(假導管)의 벽(壁) 두께는 압축이상재(壓縮異常材)가 대응재(對應材)나 측면재(側面材)보다 두꺼웠다. 수직수지구(垂直樹脂溝)는 대응재(對應材)가 그리고 수평수지구(水平樹脂溝)(방추형(紡錐形) 방사조직(放射祖織))는 압축이상재(壓縮異常材)의 쪽이 많았다. 결론적(結論的)으로 보면 라디아타소나무의 압축이상재(壓縮異常材)는 근본적으로 대응재(對應材)나 측면재(側面材)와는 상이(相異)한 특성(特性)을 지녔으나 대응재(對應材)와 측면재(側面材)는 거의 유사(類似)한 특성(特性)을 공유(共有)하는 것으로 밝혀졌다.

  • PDF

Comparison of Pipeline and Clamshell Capping Technologies for the Remediation of Contaminated Marine Sediments (해양 오염퇴적물 정화를 위한 원통관과 클램쉘을 이용한 피복 기술의 비교)

  • Kang, Ku;Hong, Seong-Gu;Kim, Young-Kee;Park, Seong-Jik
    • Journal of Navigation and Port Research
    • /
    • v.41 no.4
    • /
    • pp.195-206
    • /
    • 2017
  • In situ capping technology for marine sediment pollution control has never been applied in South Korea. In this study a pilot project for the capping was carried out in Busan N Harbor. Pipeline and clamshell capping technologies were implemented for the pollution control. Changes of capping shapes, sediment contamination, and the time and costs required for the two constructions were compared. Both the pipeline and clamshell technologies were found to satisfy the target thickness of 50 cm on average. However, the pipeline method did not operate sensitively in terms of change of the sea floor topography, resulting in an uneven shape and a thickness. Organic carbon and ignition loss quite decreased after the pipeline or the clamshell capping while pH showed no significant change. Organic and residual fraction of Cd, Ni, and Zn in the sediments appeared to decrease after all cappings. The pipeline method took a construction time four times as much as the clamshell method. The clamshell method was demonstrated to reduce the construction cost by about 40% compared with the pipeline method. However, a monitoring for all the parameters needs to be conducted at least two years in order to better evaluate an efficiency of the pollution control by these capping constructions.