• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.541-545
• /
• 2002

Stability of Monascus pilosus pigment was investigated under various conditions. The concentration of the pigments stored under air and sub-atmosphere (250 mmHg) for 30 days at room temperature decreased by 77.9% and 48.4%, respectively. The pigment solution was stable under temperature ranges of $20-80^{\circ}C$, pH 4-8, darkness and presence of KCl, NaCl, $CaCl_2$, $MgCl_2$, and $ZnCl_2$. In contrast, the pigment solution was relatively unstable, decreasing in concentration by 6.0 and 11.6% at 100 and $121^{\circ}C$, 15.5 and 13.7% at pH 3 and 9, 22.9 and 66.8% under fluorescence and sun light, respectively, and 20.2% in the presence of $AlCl_3$.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.57-57
• /
• 2019

실내 수준에서 조사되는 광량조건에 따른 자생 상록활엽 2종의 생육과 광화학반응을 조사하였다. 식물재료는 3년생 사철나무(Euonymus japonicus Thunb.) 및 2년생 돈나무[Pittosporum tobira (Thunb.) W. T. Aiton] 실생묘로 유리온실에서 재배하면서 실험에 사용하였다. 실내 광량은 10, 50, 100 및 200 PPFD(${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$)로 달리하여 8주간 재배하였으며, 광주기(12/12 h), 온도($25{\pm}1^{\circ}C$), 습도($55{\pm}3%$) 및 관수(1회/3일)조건은 고정되었다. 생육특성 및 광화학반응의 요인들이 측정되었으며, 동일기간 동안 유리온실에서 재배된 식물을 대조구로 사용하였다. 실험의 결과, 사철나무는 100, 200 PPFD의 광량에서 대조구에 비해 초장, 줄기직경, 엽수 및 엽장의 생육반응이 우수하였으며, 엽록소함량은 100 PPFD 이상의 광량에서 감소하였다. 또한 100 PPFD 이상의 광량에서 스트레스지수(Fm/Fo), 최대양자수율(Fv/Fm) 및 전자전달효율(ETo/RC)이 감소하였으며, 이는 대조구와도 유사한 경향이었다. 돈나무는 모든 광량조건에서 줄기직경과 엽폭을 제외하고 대조구와 관계없이 생육반응이 일정하였다. 그러나 스트레스지수와 최대양자수율은 10 PPFD 처리구에서 가장 낮게 조사되었고, 비광학적 에너지의 손실(DIo/RC)은 2.53으로 가장 높았다.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.55-55
• /
• 2019

본 연구에서는 실내에 조사되는 다양한 광량하에서 녹나무과 목본 2종을 재배하면서 생육반응을 조사하였다. 식물재료는 참식나무[Neolitsea sericea (Blume) Koidz.]와 후박나무(Machilus thunbergii Siebold & Zucc.)의 3년생 실생묘를 사용하였다. 실험공간은 광량을 10, 50, 100 및 200 PPFD (${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$)로 달리하였으며, 광주기(12/12 h), 온도($25{\pm}1^{\circ}C$), 습도($55{\pm}3%$) 및 관수(1회/3일) 조건이 동일하게 유지되는 밀실로 조성되었다. 각 광량조건 하에서 8주간 재배된 식물의 생육특성 및 광화학반응이 조사되었으며, 유리온실에 동일 기간동안 재배한 식물과 비교하였다. 연구 결과, 참식나무는 광량에 관계없이 초장을 제외한 전반적인 생육반응이 유사하였으며, 엽록소함량(SPAD)은 광량이 증가함에 따라 감소하는 경향이었다. 최대양자수율(Fv/Fm) 및 스트레스지수(Fm/Fo)는 200 PPFD에서 유의한 차이를 나타냈으며, 이는 대조구와 유사한 경향이었다. 후박나무는 대조구와 비교하여 모든 광량조건에서 초장이 감소하였으며, 특히 10 PPFD에서는 잎의 탈락에 따른 관상가치가 저하되었다. 엽록소함량은 100, 200 PPFD 광량에서 감소하였으며, 대조구도 유사한 경향을 나타냈다. 또한 유리온실의 대조구와 100, 200 PPFD 광량에서 최대양자수율, 스트레스지수 및 PSII 성능지수(Pi_Abs)의 유의한 차이가 확인되었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2004

An study has been performed with axisymmetric coflow diffusion flames to investigate the influence of air-side fuel side dilution and initial preheated temperature on the soot formation in methan/air flames. Soot quantities are determined by using PLII(Planar Laser Induced Incandescence), such a $C_2$H$_2$ major species(CH$_4$, $O_2$, $N_2$) and temperature are simulated by chemkin code. The numerical analysis was performed with transport properties and detailed reaction mechanisms m axisymmetric coflow diffusion flames. The study of how flame temperature and $N_2$ dilution of air and fuel side influence the soot concentrations is focused. Soot concentrations results on PLII show that preheated temperature contributes to an increase in the soot volume fraction, and soot formation Is more productive to air side dilution than to fuel side dilution. $C_2$H$_2$ concentrations have a similar tendency to soot concentrations.

• Korean Journal of Optics and Photonics
• /
• v.6 no.1
• /
• pp.33-38
• /
• 1995

We have measured the excited state absorption in $Ce:YAlO_{3}$, crystals for the first time and assigned it for a 5d$\rightarrow$conduction band transition. Two broad absorption bands were observed at 555 nm and 465 nm fowllowing the 308 nm XeCl laser excitation and their cross sections and oscillator strengths were calculated. We have also measured the fluorescence lifetimes in between 300 K and 700 K to study the nonradiative relaxation from the lowest 5d state of $Ce^{3+}$ ions and explained ESA and the transition process from the state in terms of a configurational coordinate.dinate.

• Journal of the Korean Ceramic Society
• /
• v.42 no.5 s.276
• /
• pp.333-337
• /
• 2005

In order to improve the performance of green emitting phosphors for plasma display panel, the $Zn_2SiO_4:Mn,Al$ phosphors were synthesized using sol-gel technique and studied using SEM and VUV photoluminescence spectrometer. pH values of the starting solutions (pH = 0.5$\~$2.34) were controled by HCl as the catalysis of hydrolysis and wet gels were dried at $80^{\circ}C$ and $120^{\circ}C$, respectively. We investigated the effects of pH and drying temperatures during sol-gel processes. The results indicated that the phosphor prepared at pH = 1 showed the maximum emission intensity in both drying conditions and the effect of pH of the starting solution on morphology were increased with particle size as HCl and phosphor dried at high temperature showed more spherical and smaller particles than at low.

• Analytical Science and Technology
• /
• v.16 no.6
• /
• pp.499-503
• /
• 2003

A high performance liquid chromatography gradient elution method with fluorescence detection for the determination of biotin in pure form and pharmaceutical preparations has been developed. BrMDMC gives intense fluorescence and the fluorescence was monitored with excitation at 360 nm and emission at 410 nm. The calibration curve for biotin shows good linearity over the range of 5 ~ 400 ng with correlation coefficient of 0.999. The detection limit of biotin was 2 ng and the result of recovery was 98.75% with relative standard deviation of 1.1%.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.124-131
• /
• 2007

The numerical study on behavior of impinging spray from high-pressure swirl injector under various ambient temperatures was performed by using spray vaporization model and spray-wall impingement model implemented in modified KIVA code, and these spray models were estimated by comparison with experimental results. To compute the spray-wall impingement process, the Gosman model, which is based on the droplet behavior after impingement determined by experimental correlations, was used. The modified Abramzon and Sirignano model, that includes the effects of variable thermodynamic properties and non-unitary Lewis number in the gas film, was adapted for spray vaporization process. The exciplex fluorescence measurements were also conducted for comparison. The experimental and numerical analysis were carried out at the ambient pressures of 0.1 MPa and at the ambient temperature of 293 K and 473 K, and the spray characteristics, such as spray-wall impingement process, gas velocity field, SMD and vapor concentration, were acquired. It was found that the impinging spray develops active and SMD is small at vaporization conditions.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.1
• /
• pp.27-33
• /
• 1999

Compact fluorescent lamps are very sensitive to the variation of ambient temperature. This paper investigates the temperature characteristics of a 15[W] compact fluorescent lamp, and compensates the variation of light output by frequency control of its electronic ballast. Circuit parameters for the inverter of the electronic ballast are obtained by analyzing the R-L-C equivalent circuit for the inverter and the lamp. The optimum ratio of the two capacitance($C_1$/$C_2$), which are connected with the lamp in series and in parallel, respectively, is determined which consideration of the temperature variation within a range of 10~35[$^{\circ}C$]. As a result a value of 10 for the ratio is obtained at an operating frequency of 57[kHz], and with this value the frequency control works well for temperature compensation. Its validity is verified by investigating light output stabilization characteristics resulting from frequency control of the lamp at various temperatures.

• Nuclear Engineering and Technology
• /
• v.6 no.1
• /
• pp.3-8
• /
• 1974

The annealing of natural beryl powder used for the thermoluminescent dosimetry was investigated in order to eliminate effect of previous exposure. Through the glow curve analysis, the optimal annealing treatment was found to be one hour annealing at 145$0^{\circ}C$, but annealing for one hour at 55$0^{\circ}C$ was sufficient for reuse of natural beryl powder. There are two distinguished glow peaks at $65^{\circ}C$ and 20$0^{\circ}C$ of heating temperature during readout process. The $65^{\circ}C$ glow peak fades away rapidly, but the 20$0^{\circ}C$ glow peak remains very stable. It is, therefore, quite feasible to use the 20$0^{\circ}C$ glow peak for thermoluminescent dosimetry.