• The Magazine for Energy Service Companies
• /
• s.65
• /
• pp.26-29
• /
• 2010

'친환경과 에너지절약, 기후변화 대응'은 사회전반적인 변화와 함께 조명 산업에까지 영향을 미치고 있다. 최근 5년 사이 가파르게 변화하고 있는 인공광원은 바야흐로 백열등과 형광등의 시대가 가고, LED와 OLED 등 반도체 조명이 그 자리를 대신하고 있는 것. 전세계적으로 빠른 속도로 발전하고 있는 LED 조명 기술. 발전의 중심에는 '친환경 고효율'이 있다.

• The Magazine for Energy Service Companies
• /
• s.65
• /
• pp.34-37
• /
• 2010

녹색성장의 핵심사업으로 대두되고 있는 것은 LED다. LED 광원은 백열등, 할로겐, 형광등을 대체할 뿐만 아니라, 휴대전화, 자동차, 대형 BLU, 경관조명 등 모든 분야에 적용할 수 있기 때문에 반도체 산업을 능가할 정도로 시장잠재력이 무궁무진하다. LED 기술력을 바탕으로 그린 IT 기술을 한 단계 끌어올리고 있는 국내 기업들. 그 중에서 LED 분야 전문기업인 서울반도체와 LED 조명 기술력을 갖춘 금호전기의 LED 경쟁력을 살펴보았다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.835-836
• /
• 2011

• Korean Journal of Optics and Photonics
• /
• v.25 no.5
• /
• pp.254-261
• /
• 2014

Two types of white light-emitting diodes (LEDs) with different phosphor structures were fabricated and compared in terms of their optical characteristics. Their spectroscopic properties were analyzed as a function of temperature, from room temperature to $80^{\circ}C$. The temperature dependence of the luminance and the color coordinates showed that the decrease in luminance and change in the color coordinates of the remote-phosphor type LED were much smaller compared to the conventional white LED. These improvements were attributed to the decrease in phosphor temperature, due to the distance between the LED chip and the phosphor layer, as well as to the reduced absorption by the LED chip of the light emitted from the phosphor layer.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.6
• /
• pp.49-56
• /
• 2007

In this paper, the development of excitation light source is proposed for excitation light of the photodynamic therapy of cancer. Since the selection of the wavelength band of excitation light has an interrelation with fluorescence generation according to the selection of a photosensitizer. This study aims at designing and evaluating light source that can stably generate light with various kinds of wavelengths in order to make possible photodynamic diagnosis using a photosensitizer and diagnosis using auto-fluorescence. The light source device was a Xenon lamp and filter wheel, composed of an optical output control through iris and filters with several wavelength bands. It also makes the inducement of auto-fluorescence possible because it is designed to generate a wavelength band of 380-420nm, 430-480nm, 480-560nm. The transmission part of the light source was developed to enhance the efficiency of light transmission. To evaluate this light source device by KFDA#s technical reference, the characteristics of the light output and wavelength band were found.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.180-185
• /
• 2012

The objective of this study was carried out to elucidate the effect of LEDs (light emitting diodes) irradiation in relation to early growth and inorganic elements in leaf lettuce (Lactuca sativa L. 'Rollo Rosa'). In morphological changes of leaves, shoot elongation and hypocotyl length showed poor growth in red light irradiation, while the red + blue light irradiation induced shorter plant height and much greater leaf numbers resulting in increased fresh weight. In change of the Hunter's color and SPAD values, lettuce seedlings grown under in red + blue and fluorescent light irradiation had a higher $a^*$ value, otherwise SPAD values were not changed in these light irradiations. Interestingly, relative chlorophyll contents showed 1.8 times increased redness in the treatment of red + blue light irradiation. Inorganic element (N, Ca, Mg, Mn, and Fe) and ascorbic acid contents were increased in lettuce plants grown under LEDs light irradiation compared to those of lettuce grown under the fluorescent light which showed higher P and Mn contents. In conclusion, it is considered that red + blue light irradiation which stimulates growth and higher nutrient uptake in leaf lettuce could be employed in containers equipped with LEDs.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.9-13
• /
• 2002

This paper describes the first-year accomplishments in the R'||'&'||'D project entitled, "Electrodeless Fluorescent Lamp Technology Using High-Frequency Discharges (Linear and Circular Type)," supported by a contract from the Korea Energy Management Corporation (KEMCO). One of the most important accomplishments in the prihect is that the luminance of electrodeless fluorescent lamps is increased more than 25% when the hybrid technique of capacitive and inductive couplings is utilized for both linear and circular types of high-frequency discharge fluorescent lamps compared to the case where pure capacitive couplings are used. We present the results of the experiments and the status of the development efforts in the project.t.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.77-82
• /
• 2015

In this paper, we perform a study on LED Fluorescent Lamp applying Circuit Driven Method to Tubular LED Lamp Converter. The energy efficiency of LED fluorescent lamp converter requires exceptional protection circuit design, circuit design and structure, because it can not take advantage of Heat-sink structure of the heightened degree Reflector for Fluorescent Lamp. In this paper, we performed a study on LED fluorescent lamp applying circuit driven method to tubular LED lamp converter, Also, we designs LED lamp and converter which can supply DC power common commercial power source.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.5
• /
• pp.9-16
• /
• 2005

The purpose of this research is to acquire emotional data on luminous source by measuring and evaluating human emotional response to the change of the optical feature of luminous environment Luminous sources used in actual architectural space were selected with the optical feature of luminous soured then to measure and analysis human emotional response on Luminous Source. As a result of that 1) In the result of performance measurement by the item of the clear vision of an optic function the fluorescent lamp of daylight indicated the most excellent Performance. 2) In the item of fatigue and stress, the metal halide lamp and mercury lamp showed the most 3) In $\ulcorner$ suitable in light$\lrcorner$, $\ulcorner$a similar with daylight$\lrcorner$ adjective of the amenity item the fluorescent lamp of daylight which color temperature was high turned up to be high also, in $\ulcorner$brilliant$\lrcorner$, adjective, the metal halide lamp and mercury lamp turned up to be low. 4) In the result of factor analysis, three factors $\ulcorner$activity$\lrcorner$, $\ulcorner$potency$\lrcorner$, $\ulcorner$evaluation$\lrcorner$ were abstracted and $\ulcorner$activity$\lrcorner$ factor has the most influential on evaluating the mood of interior space. 5) For the affection in the mood evaluation by each luminous sources, $\ulcorner$activity$\lrcorner$ factor was the most influential by metal halide lamp and fluorescent lamp of daylight, $\ulcorner$potency$\lrcorner$ factor was most influential by kind of incandescent lamp, $\ulcorner$evaluation$\lrcorner$ factor was most influential by fluorescent lamp of low color temperature.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.3
• /
• pp.37-41
• /
• 2018

This paper presents the integrated fluorescent oxygen sensor probe module based on planner lightwave circuits using UV imprint lithography. The oxygen sensor system is consisted of the optical source part, optical detector part and optical sensing probe part to be composed of the planner lightwave circuit and oxygen sensitive thin film layer. Firstly, we optimally designed the planner lightwave circuit with asymmetric $1{\times}2$ beam splitter using beam propagation method. Then, we fabricated the planner lightwave circuits using UV imprint lithography process. This planner lightwave circuits transmitted the optical power with 76% efficiency and the fluorescence signal with 70% efficiency. The oxygen sensitive thin film layer is coated on the end face of planner lightwave circuit. The oxygen sensor system using this sensor probe module with planner lightwave circuit could measure the concentration with 0.3% resolution from 0% to 20% gas range. This optical oxygen sensor probe module make it possible to compact, simple and cheap measurement system.