• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.2
• /
• pp.157-172
• /
• 2024

Autonomous driving technology, when commercialized, has the potential to improve the safety, mobility, and environmental performance of transportation networks. However, safe autonomous driving may be hindered by poor sensor performance and limitations in long-distance detection. Therefore, cooperative autonomous driving that can supplement information collected from surrounding vehicles and infrastructure is essential. In addition, since HDVs, AVs, and CAVs have different ranges of perceivable information and different response protocols, countermeasures are needed for mixed traffic that occur during the transition period of autonomous driving technology. There is a lack of research on traffic flow optimization that considers the penetration rate of autonomous vehicles and the different characteristics of each road segment. The objective of this study is to develop weights based on safety, operational, and environmental factors for each infrastructure control use case and autonomous vehicle MPR. To develop an integrated evaluation index, infra-guidance AHP and hybrid AHP weights were combined. Based on the results of this study, it can be used to give right of way to each vehicle to optimize mixed traffic.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.191-199
• /
• 2023

In this paper, we propose a method to extract the features of five sensor-only facilities built as infrastructure for autonomous cooperative driving, which are from point cloud data acquired by LiDAR. In the case of image acquisition sensors installed in autonomous vehicles, the acquisition data is inconsistent due to the climatic environment and camera characteristics, so LiDAR sensor was applied to replace them. In addition, high-intensity reflectors were designed and attached to each facility to make it easier to distinguish it from other existing facilities with LiDAR. From the five sensor-only facilities developed and the point cloud data acquired by the data acquisition system, feature points were extracted based on the average reflective intensity of the high-intensity reflective paper attached to the facility, clustered by the DBSCAN method, and changed to two-dimensional coordinates by a projection method. The features of the facility at each distance consist of three-dimensional point coordinates, two-dimensional projected coordinates, and reflection intensity, and will be used as training data for a model for facility recognition to be developed in the future.

• Journal of Digital Convergence
• /
• v.12 no.6
• /
• pp.349-354
• /
• 2014

A maze-escaping method with cooperating work of robots alongside one another will be proposed in this paper. Educational robots can communicate each other using Zigbee; however, they can't solve problems together due to their lack of arithmetic function. The robots walk upright controlled by a motion program; furthermore, they recognize an intersection or a dead-end in the use of distant sensors with sending data and receiving commands from the central control system. The maze-search algorithms were modified so that all robots can effectively navigate the maze.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.871-872
• /
• 2014

In this paper, I propose the method of cooperative work of swarm robot for escaping maze. The robots can communicate with each other using Zigbee, but the central control system send commands to robots because of low processing power of robots. Robots navigate the blinded maze and send information such as movement to the central control system for building map. The central control system analysis the received data and find path to escape from maze.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.299-310
• /
• 2022

The ability of an automated driving system is based on vehicle sensors, judgment and control algorithms, etc. The safety of automated driving system is highly related to the operational status of the road network and compliant road infrastructure. The safe operation of automated driving necessitates continuous monitoring to determine if the road and traffic conditions are suitable and safe. This paper presents a node and link system to build a road monitoring system by considering the ODD(Operational Design Domain) characteristics. Considering scalability, the design is based on the existing ITS standard node-link system, and a method for expressing the monitoring target as a node and a link is presented. We further present a technique to classify and manage hazard risk into five levels, and a method to utilize node and link information when searching for and controlling the optimal route. Furthermore, we introduce an example of system implementation based on the proposed node and link system for Sejong City.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.857-866
• /
• 2020

'Movement' is an expanded concept of 'place' where people act, interact with one another and achieve a specific purpose at every moment. Wheelchairs, as a mobility aid, have a profound impact on improving the quality of physical and psychological well-being for the mobility disadvantaged groups who have mobility difficulties. Such mobility aids were developed mainly for outdoor activities, but in recent years, mobility aids for indoor spaces, the main living environment, are also being developed. Because indoor mobility aids generally move short distances repeatedly, this study examined the characteristics of lithium-ion batteries in short-distance driving of battery-powered wheelchairs and compared them with the characteristics of lithium-ion batteries in continuous driving. The result showed that the driving time for short-distance driving was 2.8% shorter than that of continuous driving. The current supplied to the motor was 15.4% higher for short-distance driving than that of continuous driving.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.4
• /
• pp.1036-1056
• /
• 2017

The rapid increase of ageing population and chronic disease patients cause high medical expenses, and it led an increased attention to digital healthcare. Smart car technologies for healthcare have been developing to recognize drivers' status and predict diverse driving environments. The present study aimed to understand the research trends of autonomous vehicle technologies of Korea and the United States through time series analysis, network analysis, visualization, and comparison between the two countries. The results suggest that cooperative study needs to be done in common research areas such as driver's safety and algorithms. It is also needed to conduct studies and benchmark about liking technique related to part-to-part and vehicle-to-vehicle as America's competitive advantaged area. In the US, diverse approaches of autonomous vehicle technologies have used to consider the characteristics of various age groups and passengers' health status through sensor, while in Korea, only one aspect, older drivers, is mentioned. Implications for the development direction of autonomous vehicle technologies with competitiveness in considering public health, ethics, and driver's safety and convenience are discussed in detail.

• Journal of Korean Society of Transportation
• /
• v.36 no.2
• /
• pp.67-85
• /
• 2018

Vehicle platooning through wireless communication and automated driving technology has become realized. Platooning is a technique in which several vehicles travel at regular intervals while maintaining a minimum safety distance. Truck platooning is of keen interest because it contributes to preventing truck crashes and reducing vehicle emissions, in addition to the increase in truck flow capacity. However, it should be noted that interactions between vehicle platoons and adjacent manually-driven vehicles (MV) significantly give an impact on the performance of traffic flow. In particular, when vehicles entering from on-ramp attempt to merge into the mainstream of freeway, proper interactions by adjusting platoon size and inter-platoon spacing are required to maximize traffic performance. This study developed a methodology for establishing operational strategies for truck platoonings on freeway on-ramp areas. Average speed and conflict rate were used as measure of effectiveness (MOE) to evaluate operational efficiency and safety. Microscopic traffic simulation experiments using VISSIM were conducted to evaluate the effectiveness of various platooning scenarios. A decision making process for selecting better platoon operations to satisfy operations and safety requirements was proposed. It was revealed that a platoon operating scenario with 50m inter-platoon spacing and the platoon consisting of 6 vehicles outperformed other scenarios. The proposed methodology would effectively support the realization of novel traffic management concepts in the era of automated driving environments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.3
• /
• pp.18-29
• /
• 2022

Recently, cooperative intelligent transport systems (C-ITS) testbeds have been deployed in great numbers, and advanced autonomous driving research using V2X communication technology has been conducted actively worldwide. In particular, the broadcasting services in their beginning days, giving warning messages, basic safety messages, traffic information, etc., gradually developed into advanced network services, such as platooning, remote driving, and sensor sharing, that need to perform real-time. In addition, technologies improving these advanced network services' throughput and latency are being developed on many fronts to support these services. Notably, this research analyzed the network latency requirements of the advanced network services to develop a remote driving service for the droid type low-speed robot based on the 3GPP C-V2X communication technology. Subsequently, this remote driving service's performance was evaluated using system modeling (that included the operator behavior) and simulation. This evaluation showed that a respective core and access network latency of less than 30 ms was required to meet more than 90 % of the remote driving service's performance requirements under the given test conditions.

• Information and Communications Magazine
• /
• v.29 no.2
• /
• pp.39-45
• /
• 2012

V2X 차량 안전 시스템은 ITS 환경에서 주행하는 모든 차량들이 V2V 혹은 V2I 기반의 협력통신을 통해 안전 서비스를 제공하는 기술이다. 이는 실제 도로환경에서의 실험, 즉 Field Operational Tests(FOTs)를 통한 검증과 평가 수행이 요구된다. 그러나, 일반적으로 실 도로환경에서 시스템 및 서비스에 대한 검증과 평가는 많은 시간과 비용을 필요로 한다. 따라서 실제 도로 주행 테스트 전에 V2X 안전 서비스의 기본적인 성능을 검증할 V2X 시뮬레이션 방안이 필요하다. 본 논문에서는 국외의 V2X 시뮬레이터 기술 개발 동향과 함께 차량 간 통신 시뮬레이션 분야에서 연구되고 있는 주요 이슈들을 알아보고 이를 극복하기 위한 연구 방호별 제시한다.