• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.529-532
• /
• 2006

The application of ubiquitous technology offers many chances for improving construction management technologies. Currently the Construction System Integration Lab (CSIL) at Pusan National University is executing research on applying ubiquitous technology for better communication in the construction process. One of the research area is the implementation of RFID for monitoring the concrete pour process. The objective of this study is to collect data occurring in the process and use the data be properly planning concrete pour activities. Case study has been done on an actual concrete work. For the study a user environment was developed interfacing on internet with RFID devices that were installed in a batch plant and a construction site. The result of the test demonstrated that the RFID-based concrete monitoring can be a feasible approach for improving the communication in the construction process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.7182-7188
• /
• 2015

Recently, to improve manual mapping method, digital mapping using high-resolution camera and laser scanner has increasingly attracted attention and the relevant study is reportedly on the rise. In this study, laboratory and field test which are intended to quantitatively analyze and estimate the weathering degree which is one of the engineering characteristics of tunnel face using laser scanner that integrates high-solution imaging technique have been conducted. In a bid to analyze correlation between reflectance of laser scanner and weathering degree, investigation of the factors influencing on reflectance was carried out. And to minimize the effect on RGB value which is one the critical influential factors on reflectance, modification equation obtained from lab test was proposed. Modification equation proposed in this study was verified by comparing the values before and after correction using the data obtained by scanning. Consequently, weathering index estimated by modified reflectance appeared very similar with dominant weathering degree and weathering ratio monitored at the field.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.67-77
• /
• 2022

An automatic freeway bus-only lane enforcement system was developed and assessed in a real-world environment. Observation of a bus-only lane on the Youngdong freeway, South Korea, revealed that approximately 99% of the vehicles violated the high-occupancy vehicle (HOV) lane regulation. However, the current enforcement by the police not only exhibits a low enforcement rate, but also induces unnecessary safety and delay concerns. Since vehicles with six passengers or higher are permitted to enter freeway bus-only lanes, identifying the number of passengers in a vehicle is a core technology required for a freeway bus-only lane enforcement system. To that end, infrared cameras and the You Only Look Once (YOLOv5) deep learning algorithm were utilized. For assessment of the performance of the developed system, two environments, including a controlled test-bed and a real-world freeway, were used. As a result, the performances under the test-bed and the real-world environments exhibited 7% and 8% errors, respectively, indicating satisfactory outcomes. The developed system would contribute to an efficient freeway bus-only lane operations as well as eliminate safety and delay concerns caused by the current manual enforcement procedures.

• The Science & Technology
• /
• v.30 no.1 s.332
• /
• pp.88-89
• /
• 1997

반도체 검사장비를 제조하는 전문 벤처기업 (주)미래산업은 창업 15년만에 '테스트 핸들러'라는 장비를 개발, 돈방석에 앉았다. 공직생활 18년을 끝내고 중소기업현장에 뛰어들었다가 퇴직금 사기당하고, 18억원 들인 '완전자동웨이퍼 검사기' 개발마저 실패하는 등의 역경을 딛고 새로운 기술개발로 벤처기업의 신화를 창조했다.

• 프린팅코리아
• /
• v.11 no.12
• /
• pp.94-95
• /
• 2012

전량 수입에 의존하던 글라신지의 국내 생산이 이뤄졌다. 한솔제지는 천안공장 PM52호기에서 신제품 글라신지를 시험 생산하고, 현장 테스트를 거쳐 연말에는 시중에 출시할 계획이라고 밝혔다. 이와 관련해 한솔제지는 지난 11월 9일 천안공장에서 글라신지 신제품 설명회를 개최했다.

• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.472-482
• /
• 2023

The grid-type or room-and-pillar method is applied for the purpose of mining horizontally buried minerals. In this study, design and pilot test were performed to apply the room-and-pillar method which uses natural rock as a rock pillar to the construction of underground space. The area where the pilot test was conducted was in stone mine and had good rock conditions with an appropriate depth (about 30 m) to apply the pilot test. The pilot test site was selected by reviewing accessibility and ground conditions and then site construction was performed through detailed ground investigation and design. The pilot test was designed with a column shape of 8×8 m and a cross-section of 8×12 m. The blasting pattern was determined through test blasting at the site, and blasting of 3 m excavation with 89 holes was performed. Through field observations, the average width of 12.5 m and the average height of 8.3 m were measured. Therefore, it is possible to proceed similar to the cross-sectional shape considered in the design.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1601-1607
• /
• 2009

Vision system is an object recognition system analyzing image information captured through camera. Vision system can be applied to various fields, and automobile types recognition is one of them. There have been many research about algorithm of automobile types recognition. But have complex calculation processing. so they need long processing time. In this paper, we designed vision box based on embedded system. and suggested automobile types recognition system using the vision box. As a result of pretesting, this system achieves 100% rate of recognition at the optimal condition. But when condition is changed by lighting and angle, recognition is available but pattern score is lowered. Also, it is observed that the proposed system satisfy the criteria of processing time and recognition rate in industrial field.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.4
• /
• pp.60-69
• /
• 2015

Labor attendance management has traditionally been carried out by writing a table for checking an attendance of labor, which requires a lot of time and effort. As electronic devices with additions such as barcodes, Quick Response codes, and Radio Frequency Identification(RFID) have been developed, however, automated labor attendance management systems have appeared. Recently, various types of labor recognition devices converged with biometrics (fingerprint, vein, face recognition, etc.) have been released. However, although these devices can be used to check attendance automatically, there is insufficient guidance when it comes to selecting the appropriate labor attendance management system for construction sites. Therefore, this study proposed a decision framework to determine which labor attendance management system would be suitable for a construction site and to select the labor recognition device. This study investigated different labor recognition devices, focusing on how they worked, and tested the performance of devices and their usability for construction labor attendance management. The test results showed that RFID is most suitable when verifying the attendance of many laborers over a short period of time. The devices for hand vein and fingerprint recognition did not function when there was a foreign material such as cement or paint on the laborer's hand, except for a deformed finger. Reflecting these test results, this study suggested a framework for selecting a labor attendance system and recognition device; this is expected to contribute to the development of more efficient labor management systems.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.5
• /
• pp.421-428
• /
• 2022

The earthwork is a core process of all constructions, and compaction measurement of earthwork play an important role in improving productivity. The analog tests such as Plate Bearing Test and Sand-cone occupy current compaction measurement techniques. Due to advanced 4th Industrial Revolution, research on analog tests combined smart construction technology are actively conducted. DCPT (Dynamic Cone penetration Test), simpler and faster than conventional tests, has recently on rise. However, it is also an analog that measures data manually and has several disadvantages such as history management and data verification. The IoT-based DCPT system developed in this study combines digital wire sensors, mobile phones, and Bluetooth with conventional DCPT. Compare to conventional test methods, IoT-based DCPT has advantages such as performance time, single-person measurement, low cost, mobile-based management, and real-time data verification. In addition, a test bed was built to verify IoT-based DCPT. The test bed was built under similar conditions to the actual earthworks site through roller equipment. DCPT data obtained from 322 stations. As a result, IoT-based DCPT showed good performance, and the test bed was also showed stable results as the compaction was carried out.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06d
• /
• pp.436-439
• /
• 2010

최근 USN(Ubiquitous Sensor Network) 기술은 시범사업 수준의 테스트 환경을 벗어나 산업 현장 전반에 적용이 시도되고 있다. 현재의 USN 기술은 신뢰성 및 보안성이 취학하여 대규모 플랜트와 같은 난환경 산업 현장에의 적용이 어려운 현실이다. 또한 표준화된 기술의 부재로 인해 사용되는 USN 관련 장치들의 상호호환이 어려우며 기존 설비와의 호환이 어려워 산업 현장에 설치 규제가 심한 상태이. 다이러한 현실에도 불구하고 에너지 플랜트와 같은 고위험 시설물의 경우 설비에 대한 지속적인 감시 및 관리가 필요하며, 이를 위한 관련 기술의 개발이 필요하다. 본 논문에서는 USN 기술을 기반으로 에너지플랜트와 같은 고위험 시설물을 위한 고도화되고 지능화된 안전 인프라를 구축하여, 다양한 사고위험으로부터 안전성을 확보할 수 있는 스마트 플랜트안전 프레임워크를 제안한다. 제안하는 프레임워크에서는 플랜트를 위한 고위험 시설물의 감시에 필수적인 요소기술을 소개하고, 이를 통합하기 위한 프래임워크 구조를 제시하여 향후 관련 기술에 대한 기준점을 제시한다.