• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.86-93
• /
• 2020

Shotcrete concrete is generally used in the form of ready-mixed concrete products using type I ordinary portland cement(hereinafter referred to as OPC) and about 5% of accelerator mixed separately in the field. In this study, we tested the effect of addition of slag powder(SP) and limestone powder(LSP) on a penetration resistance, compressive strength of binder for shotcrete using calcium aluminate type accerlerator. And we analysed hydrates and pore structure effects on mortar performance. In the future, it is expected to be useful for manufacturing optimized composite cement as a binder for shotcrete.

• International Journal of Highway Engineering
• /
• v.3 no.2 s.8
• /
• pp.123-130
• /
• 2001

This study was performed to enhance mechanical properties of high-early-strength concrete using regulated-set cement for early traffic opening with various mixtures. Restraint of moisture and thermal movements of concrete pavement in actual field conditions, by external or internal restraining factors, generates tensile stresses which introduce microcracks and thus reduce the mechanical properties of concrete. Fiber reinforcement of concrete is an effective approch to the control of microcrack and crack development under tensile stresses. Three different types of regulated-set cement which recently have been used in Korea and two different types of fiber were adopted. Fibers were added and their mixtures are compared with plain high-early-strength concrete mixture. From the test results, fiber reinforced concrete was increased mechanical properties of high-early-strength concrete using regulated-set cement than the plain concrete.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.249-249
• /
• 2013

지식경제부의 청정제조기반 산업원천개발사업의 일환으로 진행 중인 "초고진공펌프 개발" 과제 중 제 3 세부 과제인 "고진공펌프종합특성평가시스템 설계, 진단기술 개발" 과제에서 진행되고 있는 연구수행결과 및 기 구축 돈 저진공펌프 종합특성평가시스템을 활용한 진공펌프의 상용화를 위한 신뢰성 평가에 관하여 소개한다. 10(3) mbar~ 10(-10) mbar 영역의 국내 진공펌프 개발 수준의 선진화를 위한 모든 특성평가장치의 국제적 신뢰성이 있는 완벽한 성능평가의 구현에 있다고 할 수 있다. 고진공펌프개발 총괄과제의 대명제는 "국제적 신뢰성을 가지는 상용화 제품의 완성"이며, 전체 사업 추진기간 동안 제품 개발 주체인 산업체에 상용화를 위한 신뢰성 기반기술의 완벽한 구현의 제공에 있다고 할 수 있다. 이러한 고진공펌프의 신뢰성 평가는 저진공펌프의신뢰성 평가기술에 기반을 두고 있으며, 기 개발 완료된 특성평가뿐만 아니라 실질적으로 공정현장에서 판단할 수 있는 내구성진단 및 제작회사에서의 기계적 신뢰성 진단기술의 복합적인 요인들의 집합적인 분석에 기인하고 있다고 판단할 수 있다. 상용화 단계의 내구성 및 신뢰성 확보를 위한 전제 조건은 대외적으로 공표할 수 있는 시험평가 데이터와 개발 주체에서 기밀 수준으로 유지해야만 하는 민감한 자료의 상시 생산 infra의 구축으로 볼 수 있다. 이러한 진공펌프개발이라는 과제의 대명제를 완성하기 위하여 추진 연구개발 방향 등 진행형인 2년간의 최종 상용화에 필요한 국제 신뢰성, 공정대응성 확보 등 핵심사업 추진내용을 소개하고자 한다.

• Journal of the Korean Geosynthetics Society
• /
• v.6 no.1
• /
• pp.33-38
• /
• 2007

PVD (Prefabricated Vertical drain) consists of filter and core. An effective PVD has two basic filtration functions ; first to retain soil particle ; and second, to allow water to pass from the soil into the PVD core without clogging or blinding. Clogging which reduces the permeability of the geotextile filter jacket is caused by fine particles penetrating into the geotextile filter jacket in relatively low permeability soil conditions. As clogging performance increases gradually, excess pore water flow from soil is resisted and finally consolidation delays. Current soil-geotextile filter system criteria are generally based on relationships between a representative pore size of the geotextile and particle size of the soil. In Korea, PVD geotextile filter system criteria have been applied by only testing AOS (Apparent Opening Size) of filters without evaluating the filtration and clogging performance on soil-geotexile filter systems. Therefore, the filtration tests on soil-geotexile filter systems were conducted in order to evaluate the filtration and clogging performance with 3 kinds of geotextile filters. On these tests, we have applied geotextile filter system criteria on PVD in ${\bigcirc}{\bigcirc}$ sites.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.2 no.4 s.7
• /
• pp.69-75
• /
• 2002

In this paper the development of a real time river water quality management system is described. This system can manage a river water quality fluctuation by finding out abnormal conditions quickly and exactly. The GIS based monitoring system collects various properties of river water quality through the wireless real time network. Tanchun, the first branch of the Han River was selected as the target basin of the system development. This system is composed of three parts - wireless real time field measuring system with a GPS receiver, a server computer and a GIS platform. After the first field test in Tanchun basin, the result showed the many possibilities of measuring various water quality properties in real time and storing the data and analyzing them within the GIS environment in real time in very efficient manners. It is expected that the developed system will contribute to the efficient management of a river water quality control and water quality related disaster prevention purposes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.112.2-112.2
• /
• 2013

지식경제부의 청정제조기반 산업원천개발사업의 일환으로 진행 중인 "초고진공펌프 개발" 과제 중 제 3세부 과제인 "고진공펌프종합특성평가시스템 설계, 진단기술 개발" 과제에서 5년 동안 진행되고 있는 전반적인 연구수행결과 및 구축 완료된 종합특성평가시스템을 활용한 고진공펌프의 상용화를 위한 신뢰성 평가에 관하여 소개한다. 고진공펌프개발 총괄 과제의 대명제는 "국제적 신뢰성을 가지는 상용화 제품의 완성"이며, 10(3) mbar~10(-10) mbar 영역의 국내 진공펌프 개발 수준의 선진화를 위한 모든 특성평가장치의 국제적 신뢰성이 있는 완벽한 성능평가의 구현을 포함한다고 볼 수 있으며, 전체 사업 추진기간 동안 제품 개발 주체인 산업체에 상용화를 위한 신뢰성 기반기술의 완벽한 구현의 제공에 있다고 할 수 있다. 이러한 고진공펌프의 신뢰성 평가는 저진공펌프의 신뢰성 평가기술에 기반을 두고 있으며, 기 개발 완료된 특성평가뿐만 아니라 실질적으로 나노종합팹센터의 공정현장에서 판단할 수 있는 내구성진단 및 최종 제품의 기계적 신뢰성 진단기술의 복합적인 요인들의 집합적인 분석에 기인하고 있다고 판단할 수 있다. 상용화 단계의 내구성 및 신뢰성 확보를 위한 전제 조건은 대외적으로 공표할 수 있는 시험평가 데이터와 개발 주체에서 기밀 수준으로 유지해야만 하는 민감한 자료의 상시 생산 infra의 구축으로 볼 수 있다. 이러한 진공펌프개발이라는 과제의 대명제를 완성하기 위한 연구개발 등 최종 상용화에 필요한 국제 신뢰성, 공정대응성 확보 기술개발 등 핵심사업 추진내용을 소개하고자 한다.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.2
• /
• pp.27-34
• /
• 2017

Various earth retaining wall methods were used on the domestic construction sites and a cast in place pile (C.I.P) method was mostly applied at deep excavation. Because of a lot of shortcomings in the C.I.P method, a new method using PHC-W earth retaining wall was developed. The earth retaining wall method using PHC-W piles has a lot of advantages including that it is safer than other earth retaining wall methods due to uniform quality and high rigidity. PHC-W was designed to effectively resist lateral earth pressure by alternating cross section of PHC pile. And increment of bending moment and shear strength were verified through KS F 4306 tests, and were increased by 42% and 98% more than KS standards.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.3
• /
• pp.581-589
• /
• 2008

The goal of a simulator is to provide for the testing of new technologies and to facilitate the eventual transfer of these technologies to the applications. In the Development Step, Simulation can provide a cost effective alternative to expensive and hazardous field testing. In this paper, a 3D simulator is developed to test UUV navigation system bated on RVC model. The simulation system consists of a environment manager, objects and a 3D viewer. Objects are modeling all physical elements such as map, obstacle and UUV which reside in a underwater environment. Those objects are created and initialized by environment manager. The environment manager plays the role of intermediator which allows created objects to interact with each other, and transmits information on the objects to 3D viewer. The 3D viewer analyzes the received information and visualizes 3D graphic by using OpenGL primitives.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.4
• /
• pp.202-208
• /
• 2020

Recently, the importance of non-face-to-face has been emphasized due to COVID-19, and the use of sharing spaces is also expanding. The use of uncontact check-in technology for access control of sharing spaces reduces waiting time and optimizes workers' efficiency, resulting in operational cost savings. In this paper, we propose a sharing space access management system based on a mobile key and RCU (Room Control Unit), access to the facility using a mobile key, and monitor the facility using an RCU. Proposal system is for shared accommodation, rental field (residence, sale-selling hotel), shared office, etc. when there is a one-time visitor on a specific day and time, the corresponding password is delivered to the mobile platform to expose and key the existing password. It is supported by a field-adaptive system that can reduce discomfort such as delivery. In order to test the operation of the proposed integrated system, tests were conducted according to scenarios to understand the overall status of the user's reservation, check-in, and check-out, and a 100% success rate was derived for each item by setting performance indicators to prove test reliability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.88-93
• /
• 2021

SAW (Submerged Arc Welding) is often used for ship construction or welding pressure vessels and involves spraying a flux in a powder form to a welding site to a certain thickness and continuously supplying electrode wires therein. This welding method enables high current welding up to 1,500 to 3,000 A. Arc efficiency is higher than 95% and the technique allows clean work as it creates less welding fume, which is composed of fine metal oxide particles, and the arc beam is not exposed. In this study, SM490C-TMC thick plates were heterogeneously welded by SAW. Mechanical properties of welds were measured, and welds were assessed macroscopically and for adhering magnetic particles. The following conclusions were drawn. Bending tests showed no spots exploded on sample surfaces or any other defect, and plastic deformation testing confirmed sufficient weld toughness. These results showed the 1F welding method has no shortcomings in terms of bending performance.