• Journal of the Korean Geotechnical Society
• /
• v.25 no.5
• /
• pp.47-52
• /
• 2009

A sand replacement method is commonly used to determine the density of the compacted soils. The density of the test or compacted soil is computed on the assumption that the calibration container has approximately the same size or volume and allows the sand to deposit approximately in the same way as a test hole in the field. The sand filling process is simulated in the laboratory and its effect on the determination of density is investigated. Artificially-made holes with different heights and bottom shapes are prepared to simulate various shapes of the test hole in the field. Three sands with different gradations are used in the testing to examine how sand grain size influences the determination of density in the field. As the height of a test hole increases, the error between known density and calculated density decreases, regardless of the types of test hole and sand used. The results of this study can be used to reevaluate and revise the test method for soil density by the sand replacement method.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.1
• /
• pp.9-17
• /
• 2017

In this study, the field density test was conducted as a volume conversion factor for the design of the excavation soil of the blasting rock. As a result of the field density test, the average volume conversion factor of rock was 1.001, which was smaller than the volume conversion factor of weathered rock 1.1. In the case of rock filled soil, the causes of the increase and decrease of the volume of the soil are provided by various phenomena. However, the specific techniques such as investigation and test methods are insufficient. Therefore, it was confirmed that the method of field density test is very useful method.

• Geotechnical Engineering
• /
• v.28 no.1
• /
• pp.39-44
• /
• 2011

TDR 함수량계는 전자기파를 이용하여 흙의 밀도와 함수비를 비파괴적으로 신속하게 평가하는 유망한 기술이다. TDR 시험법은 10~20cm 길이의 2~3개의 탐침을 지중에 관입시킨 후 전자기파의 이동시간을 측정하여 유전상수($K_a$)를 산정한다. 제안식을 이용하여 유전상수로부터 체적함수비(${\theta}$)의 산정이 가능하므로, 이 시험법은 흙의 함수비를 측정할 수 있는 비파괴시험 장치로 개발되어 활용되고 있다. 또한, 흙의 종류에 따른 보정상수가 파악되어 있는 경우에는 현장 밀도와 현장 함수비를 동시에 평가할 수 있으므로, TDR 함수량계를 이용하여 성토지만비나 노상토에 대한 신속하고 간편한 다짐관리가 기능하다.

• The Journal of Engineering Geology
• /
• v.26 no.4
• /
• pp.439-445
• /
• 2016

The new airports apply the systematic runway foundation construction to build the high quality runways in order to take the leading position to win future aerial demands and stay ahead of competitors. This study is intended to supplement the weakness of existing standard compaction test to minimize residual settlement of lower weak foundation during operation of passenger berthage. The fill material was sampled from 4 construction sites using the fill material with diameter of 100mm or less, and the standard compacting test (KS F 2312), large circular mold compacting test, and water-replacement field density test (ASTM D 5030) were conducted. The regression analysis of correlation of the field density test and the standard indoor compaction test showed the unreliable value at P-value of 0.05, and the regression analysis of the field density test and the large indoor compaction test showed the high correlation with R value of 0.8878. It is judged that the construction of overall uniform quality can be assured as the site condition is truly reflected only if the compacting test method is selected in consideration of maximum size of fill material when evaluating the maximum dry density used in design and construction.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.7
• /
• pp.31-38
• /
• 2013

After debris flow caused damage during recent years, many scholars and engineers have thrown their effort into analyzing risk from debris flow in Korea. But it is hard to predict damage by debris flow taken place in wide area. Recently, SINMAP program is widely well used to estimate the amount of debris flow and its' range. In order to make frequent use of it, the most important thing is selection of accurate input parameters. In-situ experiments, which are avaliable in the mountain, is to be suggested to get dependable input parameters for SINMAP. Those are permeability, cohesion, density, friction angle and thickness in SINMAP. To get those, test pit, block sampling, in-situ density test, auger boring, permeability test on ground surface, borehole shear test and dynamic cone test and so forth were selected. In addition, the reliability of the results will be increased through comparing with those by laboratory tests. Hence, the experiments are hard to enter the sites without temporary road and, if possible, licensing and many times are needed, too. Small size experiments are indeed necessary to get accurate parameters.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.124.1-124.1
• /
• 2011

저온 고압의 환경에서 안정한 하이드레이트 함유 퇴적물 연구를 위하여 현장의 압력을 유지하여 코어를 회수할 수 있는 압력 코어러 (Pressure Corer)가 개발된 이후로 다양한 방법으로 압력코어를 이용한 연구가 진행되어 왔다. 하이드레이트의 안정영역 특성상 일반 코어러 샘플에서는 하이드레이트 함유 퇴적물의 회수가 용이하지 않았던 이유로 압력코어샘플응 이용한 현장 하이드레이트 함유 퇴적물의 연구는 필수적이다. 초기 단계에서는 압력코어를 이용한 비파괴 검사와 단순 감압 시험이 이루어졌다. 비파괴 검사를 통하여서는 X-ray 단면, 감마 밀도 (gamma density), 음파 속도 등이 측정 되었으며 감암 시험을 통하여서는 시료 내 하이드레이트 함유량을 산정하였다. 감압 후 다양한 지화학 분석이 후행되었다. 가스 하이드레이트 함유 퇴적물의 물성과 생산 거동이 점차 부각됨에 따라 압력코어 시료를 순간 감압하여 액체 질소에 보관하였다가 압밀시험, 삼축 압축 시험 등 물성 시험이 수행되었으며 수행 동안 X-ray 단면, 비저항, 음파 속도 등의 물성측정이 이루어졌다. 또한 액체 질소 보관 시료를 이용하여 감압법, 열염수 주입법, 열자극 법 등을 적용하여 생산 실험을 수행하기도 하였다. 이후에 압력코어 시료 절단 및 이동 시스템이 개발됨에 따라 보다 다양하고 많은 연구자 들이 압력코어 시료를 이용할 수 있게 되었으며 물성 연구뿐만 아니라 미생물 연구에 까지 압력코어 시료가 사용되게 되었다. 최근에는 절단 시료를 이용한 생산 실험 연구 또한 진행되었다.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.65-74
• /
• 2018

The degree of compaction of embankments is generally measured using the sand replacement method or a soil density gauge. However, these methods include coarse particles, which are relatively large. The degree of compaction is overestimated if the in-situ soil density is simply compared with the density obtained from a Proctor compaction test (KS F 2312, 2001), because the density of coarse particles is higher than that of soil. However, there is no recommended correction for the coarse particle ratio in Korea, thus intentionally increasing the degree of compaction for structures to which large loads are applied or for which compaction is critical. Here, a correction considering the Korean Proctor compaction test and the difference between the maximum allowable particle sizes was recommended after corrections for coarse particle ratios in other countries were collected and analyzed. The degree of compaction was re-estimated by applying the recommended correction to the results of both Proctor compaction and sand replacement tests. The degree of compaction without the correction of coarse particle ratio was overestimated, because the re-estimated degree of compaction decreased as the coarse particle ratio increased. The relatively accurate results obtained from the field application of the correction will offer long-term cost savings due to reduced maintenance fees during operation.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.12
• /
• pp.5-11
• /
• 2017

The 19 mm-sized aggregate was produced by melting vinyl waste (waste polyethylene film) generated from vinyl greenhouses in rural areas. It was mixed with As'cone at various weight ratios, and then insulation effect test, tension test after repeated freezing and thawing, ice pull-out strength test and field density test were conducted for the mixtures. These results demonstrated that as the mixing ratio of polyethylene aggregate increased, the insulation effect increased, due to the many pore spaces that existed in the polyethylene aggregate. After repeatedly freezing and thawing As'cone, the tensile strength significantly increased at 2.5% of the polyethylene aggregate content rather than 0% of polyethylene aggregate content but it also slightly decreased at 5% and 10% of polyethylene aggregate content in comparison to 2.5% of its polyethylene aggregate content. As'cone added with polyethylene aggregate by 2.5% resulted in lower ice pull-out strength than that of normal As'cone. As a result of the porosity test for the samples taken at the site, porosity of the As'cone, which added polyethylene aggregate, was smaller than that of the general As'cone.

• Geotechnical Engineering
• /
• v.3 no.4
• /
• pp.31-40
• /
• 1987

A helical probe test (HPT) suitable for in.situ soil exploration to a shallow depth and compaction control were developed and tested in different soils alongside traditional in-situ tests, including Standard Penetration Test (SPT), Cone Penetration Test (CPT) and in-situ density test. The helical probe test is economical and can be performed by a single person. The torque necessary to insert the probe Is used as a measure of soil characteristics. It was found that: the HPT test correlates well with the SPT test and the correlation is not sensitive to the soil type; the HPT test correlates well with the CPT test, but the correlation is sensitive to the soil type; the HPT torque provides a sensitive measure of relative compaction rind in-situ dry density of compacted soils; the reverse torque ratio decreases with increasing average grain sloe.

• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.115-127
• /
• 2006

The purpose of field monitoring system in KHC-Test Road is to provide the performance data for environmental loadings from pavement surface. Among them, water content reflectometer(WCR) are used for measuring the volumetric water content of pavement subgrades. However, WCRs are not well-calibrated based on the local field conditions. A need therefore exists for improving equations for predicting water content using the proper field and laboratory calibrations. Based on the study performed, calibrations based on various soil characteristics and density conditions are well fitted to the data from fields. So, it is recommended to use the suggested general calibration of WCR to the compacted subgrade soils in test road for predicting the volumetric water content.