• Journal of the Korea Concrete Institute
• /
• v.29 no.2
• /
• pp.159-167
• /
• 2017

A precast concrete deck system is considered an effective alternative in terms of its rapid construction and quality assurance than cast-in-place concrete deck. In precast concrete deck system, structural performance and serviceability are mostly determined by the connection methods between the precast decks. This research proposes more improved precast deck system with asymmetric ribbed connection details improving the disadvantage of previous precast deck system such as difficulties in assembling precast decks. And in this precast deck system, a separate form is not required at the site because partition wall of the precast decks serves as a form when placing non-shrinkage mortar in the connection part of the precast decks. Therefore, rapid construction is possible. Flexural performance is verified through load tests considering main parameter such as rib length in the precast deck connection. From the test results, it can be inferred that the development of the rebar and prevention of adhesion failure in the partition wall of the precast deck system are important factors in securing the flexural performance. Although the structural performance of the precast deck system with asymmetric connection details is gradually reduced as the rib length in the precast deck connection increases, the proposed precast deck system shows sufficient flexural performance and can be applied to the connection part of precast decks effectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1519-1526
• /
• 2013

This study reviewed the capturing performance of a canopy hood used in some melting processes of a casting manufacturing factory through a site survey. In addition, this study compared and evaluated the flow field and pressure field for the plans to enhance the hazardous air pollutants collection capacity by using CFD model. The case-2(flange attached + double hood) can be improved in terms of collection performance, but is expected to increase in hood static pressure by about 70% more than the existing structure, so it was shown that its site applicability is not good. It is judged that the shape of case-3(flange attached + double cone attached) is most suitable to improve the suction efficiency. This is because a double cone is installed at the center of the opening to concentrate the flow rate on the edge of the hood and control the hume rising to the center of the hood without a static pressure rise via the slope of the cone.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.4
• /
• pp.348-354
• /
• 2015

Urethane waterproofing materials which currently being used most commonly in the Korean domestic market have high applicability and construct layers without forming any joints, but under the influence of low temperature and low humidity, as well as the thickness of the applied layer, the curing time of this material may become extended in construction sites. To resolve these issues, a proposed method of using water-hardening type of polyurethane waterproofing materials are being developed. However, there currently lacks any standards or evaluation methods on determining an optimal mixture ratio of water for the water-hardening polyurethane waterproofing materials. Therefore, workers and construction workers are relying on their hands-on-skills and experience to determine this ratio and are not able to obtain a consistent performance quality out of these materials. Therefore, for the establishment of a board applicability of the water-hardening polyurethane waterproofing methods in construction sites, this study objectively analyzes the changes in the performance of these materials depending on the changes of the water mixture ratio and attempts to procure the optimal ratio on the basis of forming a provisionary standard. The study prepares mixtures of varying ratio(no water added, 5, 10, 15, 20, 25, 30, 40 and 50) and conducts comparative analysis respective mixtures' performances and their changes in the physical properties in an objective manner and proposes a provisional optimal value that can serve as a data base that can be used as a reference for future studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6565-6574
• /
• 2013

Precast concrete blocks are used mainly for score protection, slope protection and riverbed structure protection, etc. Because these concrete blocks are exposed to water or wetting environments, the steel rebar used as reinforcements in concrete blocks can corrode easily. Corrosion of the steel rebar tends to reduce the performance and service life of the concrete blocks. In this study, Glass Fiber Reinforced Polymer(GFRP) rebar, which does not corrode, was applied instead of a steel rebar to prevent performance degradation of the blocks. Recycled concrete aggregate and high early strength cement(HESC) were used in the concrete mix for field applicability. The experiment results showed that the workability and form removal strength of the recycled aggregate concrete using HESC showed comparable results to normal concrete and the compressive strength at 28 days increased by about 18% compared to normal concrete. The load resistance capacity of the recycled aggregate concrete blocks reinforced with a GFRP rebar increased by approximately 10~30% compared to common concrete block.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.1-9
• /
• 2015

Due to the increasing number of deteriorated bridges worldwide, the importance of maintenance and replacement of existing bridges are being emphasized. Cast-in-place concrete deck which is mainly applied to deck replacement of existing bridges have problems such as deterioration concerns by initial crack, labor cost increase, difficulties of maintenance and replacement, construction time increase, and indirect cost increase by traffic congestion. On the contrary, a precast concrete deck is considered as an effective alternative because of its quality assurance and accelerated construction. The connection method ensuring the required strength and durability is especially important, because the connection part of the precast concrete deck is vulnerable to cracks and leakage. Therefore, this study proposes precast bridge decks with ribbed connection which are more improved than existing bridge deck joints, and flexural performance is verified through various parameter tests.

• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.131-140
• /
• 2011

도로안전시설용 시선유도봉은 통상 도로에 설치되어 운전자의 시선을 유도하고 차선을 분리하는 용도로 사용된다. 이러한 시선유도봉은 주로 도로상에 설치되기 때문에 차량과 부딪히는 경우가 자주 발생하므로 제품의 내구성이 특히 요구된다. 종래의 시선유도봉에 대한 평가방법은 제품의 일부를 채취하여 재료의 기본 품질 성능만을 평가하였다. 그러나 현장의 도로관리를 담당하고 있는 수요기관에서는 빈번한 사고와 민원으로 인해 제품의 평가방법에 대한 문제 제기를 하였고, 완제품 상태로 신뢰성을 평가할 수 있는 방법 개발을 요구하였다. 따라서 본 연구에서는 시선유도봉의 주요 고장 요인이 되는 차량 충돌에 의한 재질 파손, 바퀴 압축에 의한 회복 불능, 제품 표면에 부착되는 반사시트의 박리 및 변색에 대한 고장 메커니즘 분석하고, 이러한 고장을 재현할 수 있는 신뢰성 평가법을 개발하고자 하였다. 주요 고장 메커니즘 분석을 위해 국내.외 평가 기준을 조사하였으며, 특히 미국 AASHTO's (American Association of State Highway and Transportaion Officials)의 NTPEP (National Transportation Products Evaluation Program)에서 수행하고 있는 내구성 평가 방법에 대한 사례 조사를 통해 국내 적용을 검토해 보았다. 또한 서울시설관리공단의 협조로 가장 주요한 고장의 요인으로 꼽히는 차량 충돌 시험을 올림픽대로 내 조각공원에서 실시하였다. 그 결과 시험실에서 고장을 재현할 수 있는 신뢰성 평가 장비 개발의 필요성이 부각되었으며, 차량 충돌과 바퀴 압축을 모사할 수 있는 신뢰성 평가 장비를 제작하였다. 시선유도봉의 신뢰성 평가는 기본적인 품질성능평가 이외에 신규로 개발된 충격시험(고온, 저온, 반사지)과 굴곡압축시험, 반사지와 재질의 내후성 시험을 실시하였다. 또한 국내 9개사(社) 10개 제품에 대한 신뢰성 비교평가를 실시한 결과, 제품의 내구성에 중요 척도가 되는 신뢰성 평가 기준을 설정할 수 있었고, 합리적인 제품의 가격 수준과 품질 수준에 대한 신뢰성 가이드를 제공할 수 있었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.59-65
• /
• 2024

In this study, in order to improve the mechanical properties and durability of asphalt mixtures, a modifier (CSM, Cationized Silicate Modifier) was applied to asphalt to derive optimal mixing ratio conditions. Design of asphalt mixture using modified asphalt binder was conducted, and moisture resistance and dynamic stability were evaluated for optimal mixing conditions. The evaluation results showed that it exceeded the standards stipulated in the relevant guidelines, and as a result of conducting a water permeability test on the optimal mixing condition, it was confirmed that impermeable performance was secured. As a result of examining the noise reduction performance through field test, a noise reduction performance of about 10 dB was secured compared to before paving. It will be necessary to secure reliability through continuous noise generation evaluation in the future.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.74-79
• /
• 2020

Safety inspection of cable-supported bridge has increasingly attention as many cable-supported bridges are currently constructed/operated. Whilst cables as a main component in cable-supported bridge should be inspected regularly, traditional method (visual inspection) has limitation to check the condition of cables properly due to restricted factors. It is evidently necessary to develop cable-inspection robot to overcome this concern. In this respect, the main aim in this study is to manufacture the improved robot compared with the existing robot. The improved functions of the robot in this study were that the robot can be operated in large cable diameter (greater than 200 mm) and climbing ability of the robot increases. In addition, electro-magnetic sensor as a non-destructive method in the robot was added to detect damaged cables and performance of the sensor was evaluated in indoor and field experiments. Consequently, the robot was able to move on the cable with ~0.2m/s and to detect damaged cables using the sensor. It was also confirmed that performance of the robot in field test is similar to that in indoor test.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.5
• /
• pp.433-442
• /
• 2014

The most design criteria and specifications in Korea utilized to ensure appropriate quality are based on process and prescriptive criteria determining materials, measure and methods. It has many problems including a loss of competitiveness resulting from inhibited creativity of the contractors. The performance-based specifications focused on final product are being proposed, but have difficulty in adapting to the architectural field. In this study the hybrid specification prototype for curtain wall construction was suggested. The specification framework was presented through analysis of linkage between the performance and prescriptive specification cases. Based on the survey with practitioners, the performance inspection process and the sample specification were developed by identifying the essential performance test timings. The applicability of the specification prototype was evaluated by interviews with experts. It was found that the prototype was active and a progressive supporting tool which could support to secure phased performance during construction as well as final performance.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10c
• /
• pp.521-525
• /
• 2006

최근 소프트웨어의 주요 알고리즘 및 자료구조 등의 지적재산권을 역공학 분석과 같이 악의적인 공격들로부터 보호하기 위한 연구가 이루어지고 있다. 본 논문에서는 산업 현장에서 많이 사용되는 Visual C++ 또는 MFC로 작성된 프로그램의 소스 코드를 역공학 공격으로부터 보호하기 위한 Obfuscation 도구를 구현하고 그 성능을 평가한다. 구현된 도구는 3가지 Obfuscation 알고리즘을 적용하여 소스 코드를 생성하며 생성된 소스 코드들은 가독성이 떨어지고 역공학 분석이 어렵도록 변환되지만, 프로그램의 본래 기능은 그대로 유지하며 성능상의 변화가 크지 않음을 실험을 통해 확인할 수 있었다.