• Korean Journal of Environmental Agriculture
• /
• v.38 no.1
• /
• pp.54-60
• /
• 2019

BACKGROUND: Hydrogen fluoride is one of the 97 accident preparedness substances regulated by the Ministry of Environment (Republic of Korea) and chemical accidents should be managed centrally due to continual occurrence. Especially, hydrogen fluoride has a characteristic of rapid diffusion and very toxic when leaking into the environment. Therefore, it is important to predict the impact range quickly and to evaluate the residual contamination immediately to minimize the human and environmental damages. METHODS AND RESULTS: In order to estimate the accident impact range, the off-site consequence analysis (OCA) was performed to the worst and alternative scenarios. Also, in order to evaluate the residual contamination of hydrogen fluoride in crop, the samples in accident site were collected from 15-divided regions (East direction from accident sites based on the main wind direction), and the concentration was measured by fluoride ($F^-$) ion-selective electrode potentiometer (ISE). As a result of the OCA, the affected distance by the worst scenario was estimated to be >10 km from the accident site and the range by the alternative scenario was estimated to be about 1.9 km. The residual contamination of hydrogen fluoride was highest in the samples near the site of the accident (E-1, 276.82 mg/kg) and tended to decrease as it moved eastward. Meanwhile, the concentrations from SE and NE (4.96~28.98 mg/kg) tended to be lower than the samples near the accident site. As a result, the concentration of hydrogen fluoride was reduced to a low concentration within 2 km from the accident site (<5 mg/kg), and the actual damage range was estimated to be around 2.2 km. Therefore, it is suggested that the results are similar to those of alternative accident scenarios calculated by OCA (about 1.9 km). CONCLUSION: It is difficult to estimate the chemical accident-affecting range/region by the OCA evaluation, because it is not possible to input all physicochemical parameters. However simultaneous measurement of the residual contamination in the environment will be very helpful in determining the diffusion range of actual chemical accident.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.1
• /
• pp.106-127
• /
• 2019

This study aims to understand spatio-temporal variations of macrozoobenthos community in Han River (HRE), Geum River (GRE), and Nakdong River estuaries (NRE) of Korea, sampled by National Survey of Marine Ecosystem. The survey was seasonally performed at a total of 20 stations for three years (2015-2017). Sediment samples were taken three times with van Veen grab of $0.1m^2$) areal size and sieved through a 1 mm pore size mesh on site. A total of 1,008 species were identified with 602 species in HRE, 612 in GRE, and 619 in NRE, showing similar number of species between estuaries. Mean density was $1,357ind./m^2$, showing the high in NRE ($1,357ind./m^2$), mid in GRE ($1,357ind./m^2$), and low in HRE ($1,127ind./m^2$). Mean biomass was $116.8g/m^2$, showing similar variations to density ($174.2g/m^2$ in NRE, $129.0g/m^2$ in GRE, $49.0g/m^2$ in HRE). Polychaeta dominated in number of species and density in three estuaries. Biomass-dominated taxon was Mollusca in HRE and GRE, and Echinodermata in NRE. Polychaetous species dominated all three estuaries over 4% of density, such as Dispio oculata, Heteromastus filiformis and Aonides oxycephala in HRE, Heteromastus filiformis and Scoletoma longifolia in GRE, and Pseudopolydora sp. and Aphelochaeta sp. in NRE, showing various density between estuaries. Community structure was determined by various environmental variables among estuaries such as mean grain size and sorting (HRE), salinity and mean grain size (GRE), and salinity, dissolved oxygen, loss on ignition and mud content (NRE). Our study demonstrates the application of different measures to manage ecosystems in three estuaries. HRE needs to alleviate sedimentary stressors such as sand mining, land-filling, dike construction. Management of GRE should be focused on fresh water control and sedimentary stressors. In NRE, monitoring of dominant benthos and process study on hypoxia occurrence in inner Masan Bay are necessary.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.2
• /
• pp.195-200
• /
• 2019

The purpose of this study is to present a model for enhancing the academic excellence of adult college students. For this purpose, 408 adult college students attending 2-year and 4-year colleges in Busan, Daegu, and Gyeongbuk were surveyed and analyzed. The components of the model are curriculum, educational methods, evaluation of education, educational administration, educational environment, and institutional support and the results are as follows. First, the curriculum preferred by adult college students was to acquire diverse academic knowledge for a degree, to acquire knowledge and skills to develop skills for the workplace, and to acquire new information and knowledge regarding issues in society as a whole. Second, the professors' qualification among the educational methods preferred by adult college students was professional competence of the professors based on their theoretical and practical skills. The preferred teaching methods were lecture, discussion, action learning, and the project learning method in that order and video and PowerPoint were preferred as effective teaching mediums. Third, the preferred course for adult college students is operated on weekends, and three years was preferred to get a bachelor's degree. The possible hours of learning per day is 3~6 hours, indicating the necessity of e-learning, B-learning, and prior learning experience recognition systems. Fourth, the education evaluation method preferred by adult college students was a compromise method which is a mixture of absolute evaluation and relative evaluation, and it also showed the need for Pass or Non Pass evaluation method. Fifth, the internal factors of college selection preferred by adult college students were the acquisition of new knowledge and skills, and the external factors were desire to receive many opportunities related to employment and job improvement. The classroom, which provides an effective environment, was a fixed seat classroom and an indoor classroom environment was emphasized for desired educational environment. Sixth, institutional support preferred by adult college students was computer-related programs and learning club support services.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.292-299
• /
• 2018

In a survey in which farmers were asked about their levels of satisfaction with agricultural machines, Japanese products scored higher than local products by 1.2, 1.3, and 1.4 times for tractors, combine harvesters, and rice transplanter, respectively. Japanese products corresponded to generally high satisfaction levels in terms of operating performance, operability, frequency of breakdowns, and durability, excluding sales price and after-sales services. Effective countermeasures through quality improvement are therefore necessary for Korean products. Furthermore, a survey of dealers showed that the components and consumables for core agricultural machines had high frequencies of breakdowns and repairs. Four major components of tractors represented 85.3% of all breakdowns and repairs, five components of combine harvesters represented 89.6%, and three components of rice transplanters represented 80.5%. Moreover, a comparison of the technological levels between local and imported machines showed that the local machines' levels were at 60-100% for tractors, 70-100% for combine harvesters, and 70-95% for rice transplanters. Small and mid-sized tractors, 4 interrow combine harvesters, and 6 interrow rice transplanters showed similar levels of technology. The results of the analysis suggest that action is urgently needed at a policy level to establish an agricultural machinery component research center for the development, production, and supply of commonly-used components, with the participation of manufacturers of agricultural machines and components, in order to enhance the competitiveness of local manufacturers and to revitalize the agricultural machine market.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.199-222
• /
• 2022

It has been 100 years since the excavation of Geumgwanchong (Gold Crown Tomb), a tomb that was accidentally discovered in Noseo-ri, Gyeongju at the end of September 1921 during Japanese colonial rule. Although it is known for its discovery, not only in the Korean Peninsula but also in Asia and beyond, the excavation report was published in Japanese and English by the Government-General of Korea in 1924 and 1928, three years after the excavation. TOMB "KINKANTSUKA" or THE GOLD CROWN TOMB at KEISHU, AND ITS TREASURES) was published as a series of books and picture books. The excavation report was prepared by Kosaku Hamada (濱田耕作), who was a member of the Ruins Investigation Committee of the Japanese Government-General of Korea (later became the President of Kyoto Imperial University, Kyoto, Japan), and Sueji Umehara (梅原末治), who was commissioned to investigate the remains of the Japanese Government-General of Korea. In this paper, the preface was written in July 1922, about half a year after the excavation of tombs, which was much earlier than the official reports, in the 'Korean and Chinese reading book (稿本 高等朝鮮語及漢文讀本 巻五)' by Hamada Kosaku (濱田耕作) for high school students in Korea, which was titled 'New Excavated Artifacts in Gyeongju (慶州의 新發掘品)' with a subtitle '絶大의 發見', a slightly awkward expression in Korean, but it means 'a very big discovery'. The meaning has been introduced as a single unit, emphasizing its significance in terms of the achievements of the excavation of Geumgwanchong, academic and archaeological discoveries, and cultural history in Korean language rather than Japanese language. Since the manuscript was written immediately after the excavation, the excitement as an archaeological researcher at the time of the excavation and expectations for future research can be read as it is. In this paper, I would like to introduce the voice of the excited field leader of the Japanese Government-General of Korea after the excavation of Geumgwanchong in 2022, the 100th anniversary of the writing. In addition, the process from the discovery of the tomb to the preparation of the report was summarized in one chronological table to make it easier to understand the series of flows.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.2
• /
• pp.99-114
• /
• 2020

In this study we examined the topic analysis and correlation analysis by text mining from the self introduction letter of freshman at Korea National College of Agriculture and Fisheries(KNCAF) in 2020. The analysis items of the 3rd question were and the 4th question were the motivation for applying to college, the academic plan and the career plan. The text mining to the 3rd question showed that the frequency of 'friends' was overwhelmingly high, followed by keywords such as 'thought', 'time', 'opinion', 'activity', and 'club'. In the 4th question, keyword frequency such as 'thought', 'agriculture', 'KNCAF', 'farm', 'father' was high. The result of association rules analysis for each question showed that the relationship with the highest support level, which means the frequency and importance of the rule, was the {friend} <=> {thought}, {thought} <=> {KNCAF}. The confidence level of a correlation between keywords was the highest in the rules of {teacher}=>{friend}, {agriculture, KNCAF}=>{thought}. Also the lift level that indicates the closeness of two words was the highest in the rules of {friend} <=> {teacher}, {knowledge} <=> {professional}. These keywords are found to play a very important roles in analyzing betweenness centrality and analyzing degree centrality between keywords. The results of frequency analysis and association analysis were visualized with word cloud and correlation graphs to make it easier to understand all the results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.73-80
• /
• 2022

In this study, details of NRC beam-column connections were developed in which beam and columns pre-assembled in factories using steel angles were bolted on site. The developed joint details are NRC-J type and NRC-JD type. NRC-J type is a method of tensile joining with TS bolts to the side and lower surfaces of the side plate of the NRC column and the end plate of the NRC beam. NRC-JD type has a rigid joint with high-strength bolts between the NRC beam and the side of the NRC column for shear, and with lap splices of reinforcing bar penetrating the joint and the beam main reinforcement for bending. For the seismic performance evaluation of the joint, three specimens were tested: an NRC-J specimen and NRC-JD specimen with NRC beam-column joint details, and an RC-J specimen with RC beam-column joint detail. As a result of the repeated lateral load test, the final failure mode of all specimens was the bending fracture of the beam at the beam-column interface. Compared to the RC-J specimen, the maximum strength of the specimen by the positive force was 10.1% and 29.6% higher in the NRC-J specimen and the NRC-JD specimen, respectively. Both NRC joint details were evaluated to secure ductility of 0.03 rad or more, the minimum total inter-story displacement angle required for the composite intermediate moment frame according to the KDS standard (KDS 41 31 00). At the slope by relative storey displacemet of 5.7%, the NRC-J specimen and the NRC-JD specimen had about 34.8% and 61.1% greater cumulative energy dissipation capacity than the RC specimen. The experimental strength of the NRC beam-column connection was evaluated to be 30% to 53% greater than the theoretical strength according to the KDS standard formula, and the standard formula evaluated the joint performance as a safety side.

• Korean Journal of Ecology and Environment
• /
• v.54 no.4
• /
• pp.280-290
• /
• 2021

The present study investigated species richness and phytoplankton community structure in lakes in the Geum River Basin during autumn and spring seasons. Surveys were conducted between September and November 2019, and between April and May 2020, which corresponded to the autumn and spring seasons, respectively, to explore the distribution characteristics of the species. A total of 49 species of phytoplankton belonging to 31 genera and seven classes were identified in Cho Pyeong-ji, 51 species belonging to 29 genera and six classes were identified in Song Ak-ji, 49 species belonging to 32 genera and seven classes were identified in Cheong Cheon-ji, 82 species belonging to 45 genera and six classes were identified in Ye Dangji, and 70 species belonging to 40 genera and six classes were identified in Ganwol Lake. A total of 43 species belonging to 74 genera and seven classes were identified. The ranges of phytoplankton standing crop were as follows: 223~3533 cells mL^-1 in Cho Pyeong-ji, 881~176018 cells mL^-1 in Song Ak-ji, 402~6139 cells mL^-1 in Cheong Cheon-ji, 262~10460 cells mL^-1 in Ye Dang-ji, and 20413~330695 cells mL^-1 in Ganwol Lake. Phytoplankton diversity in Cho Pyeong-ji, Song Ak-ji, Cheong Cheon-ji, Ye Dang-ji, and Ganwol Lake were 1.10~2.60, 0.56~2.03, 0.21~2.03, 0.65~2.57, and 0.44~1.12, respectively. Phytoplankton species richness in Cho Pyeong-ji, Song Ak-ji, Cheong Cheon-ji, Ye Dang-ji, and Ganwol Lake were 1.91~4.99, 1.82~3.26, 1.26~4.17, 2.07~5.37, and 1.90~2.43, respectively. Phytoplankton evenness indices in Cho Pyeong-ji, Song Ak-ji, Cheong Cheon-ji, Ye Dang-ji, and Ganwol Lake were 0.38~0.78, 0.18~0.69, 0.08~0.71, 0.22~0.72, and 0.14~0.38, respectively. Phytoplankton dominance indices in Cho Pyeong-ji, Song Ak-ji, Cheong Cheon-ji, Ye Dang-ji, and Ganwol Lake were 0.40~0.83, 0.55~0.96, 0.44~0.99, 0.42~0.93, and 0.89~0.97, respectively.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.1
• /
• pp.37-42
• /
• 2021

Munseom (Island) is known as the largest native Elaeocarpus sylvestris var. ellipticus in Korea. Recently, disease damage from the E. sylvestris var. ellipticus community has been reported in Munseom. This study was conducted to understand the damage situation and growth characteristics of the E. sylvestris var. ellipticus population in Munseom. The purpose of this study was to evaluate the spontaneous regeneration potential of the community by grasping the characteristics of the population of surviving E. sylvestris var. ellipticus individuals, and to discuss ways to restore native habitats. A total population survey was conducted to determine the distribution status of E. sylvestris var. ellipticus individuals. The field survey carefully recorded the height of tree, DBH, DRH, and growing status, along with GPS location information of the individual. The growth status of E. sylvestris var. ellipticus individuals distributed in Munseom and the characteristics of tree height, DBH, DRH of each individual were analyzed. The total number of E. sylvestris var. ellipticus populations identified in Munseom was 293. The dense E. sylvestris var. ellipticus community reported in 2005 has been identified as being greatly damaged or damaged. In particular, the damage was more serious in mature trees with a height of 6m or more forming the canopy layer in the forest, and it was confirmed that 80.6% of the mature trees died. In the growth characteristics of the old-growth tree, which is an indicator of the health of the forest based on DRH, 75.4% died or the growth condition was found to be poor. In order to restore the native habitat of E. sylvestris var. ellipticus in Munseom, conservation efforts such as pest control, preservation of mature trees, control of the territory of young trees, and reintroduction after ex-situ transplantation etc. are considered necessary.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.1
• /
• pp.28-43
• /
• 2022

This study classified UAV image-based physical spatial types for parks in urban areas of Changwon City and analyzed thermal comfort characteristics according to physical spatial types by comparing them with ENVI-met thermal comfort results. Physical spatial types were classified into four types according to UAV-based NDVI and SVF characteristics. As a result of ENVI-met thermal comfort, the T_MRT difference between the tree-dense area and other areas was up to 30℃ or more, and it was 19. 6℃ at 16:00, which was the largest during the afternoon. As a result of analyzing UAV-based physical spatial types and thermal comfort characteristics by time period, it was confirmed that the physical spatial types with high NDVI and high SVF showed a similar to thermal comfort change patterns by time when using UAV, and the physical spatial types with dense trees and artificial structures showed a low correlation to thermal comfort change patterns by time when using UAV. In conclusion, the possibility of identifying the distribution of thermal comfort based on UAV images was confirmed for the spatial type consisting of open and vegetation, and the area adjacent to the trees was found to be more thermally pleasant than the open area. Therefore, in the urban planning stage, it is necessary to create an open space in consideration of natural covering materials such as grass and trees, and when using artificial covering materials, it is judged that spatial planning should be done considering the proximity to trees and buildings. In the future, it is judged that it will be possible to quickly and accurately identify urban climate phenomena and establish urban planning considering thermal comfort through ground LIDAR and In-situ measurement-based UAV image correction.