• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2106-2107
• /
• 2008

이 논문은 국내 저압접지방식의 현장적용화를 위한 실증시험장 구축과 실증시험의 검증을 위한 시뮬레이션 환경 구축에 관한 논문이다. 외함접지방식에 의존하고 있는 국내 저압접지방식은 IEC에서 제안하고 있는 접지방식에 비하여 낙후되어 있고, 이에 대한 증거로서 선진국에 비하여 십수배에 달하는 감전사고 발생을 들 수 있다. 이러한 국내 실정을 극복하고자, IEC저압접지방식에 대한 실증시험장 구축을 목적하고 있으며, 그에 대한 일환으로 실증시험 검증용 시뮬레이션 환경 구축을 수행하고 있다. 본 논문은 TN-S 방식의 접지방식으로 구성된 배전계통을 PSCAD/EMTDC를 이용하여 모델링하고, 도체-외함-접지의 동시지락을 모의함으로서 외함도체의 전위상승과 감전사고의 발생 가능성을 모의하였다.

• Review of KIISC
• /
• v.27 no.2
• /
• pp.41-45
• /
• 2017

전력망과 IT의 융합으로 구현되는 스마트그리드가 IT 보안의 위협을 갖게 됨에 따라 스마트그리드에서의 안전한 통신을 보장하기 위한 수단 중 하나로 스마트그리드 기기 인증 운영 시스템을 운영한다. 이는 스마트그리드에서 운영되는 기기에 대한 인증서 발급, 등록, 관리 및 검증 서비스를 제공하여 기기인증서를 기반으로 신뢰성 높은 네트워크 환경을 구축한다. 본 논문에서는 스마트그리드 환경 하에서 동작하는 다양한 기기들이 신뢰성이 높은 네트워크 환경구축을 통해 안전한 통신이 가능하도록 지원하는 PKI 기반 기기 보안인증 운영시스템의 구현 결과를 설명하고, 제안된 시스템의 신뢰성, 현장적용성 검증을 위한 실증 테스트베드 구축 및 실증실험에 따른 결과를 제시한다.

• Explosives and Blasting
• /
• v.41 no.1
• /
• pp.1-18
• /
• 2023

Stemming is a process applied to blast holes to prevent gases from escaping during detonation. A stemming material helps confine the explosive energy for longer and increases rock fragmentation. This study developed a stemming material based on a shear-thickening fluid (STF) that reacts to dynamic shock. Two blasting experiments were conducted to Field-verify the performance of the STF-based stemming material. In the first experiment, the pressure inside the blast hole was directly measured based on applying the stemming material. In the second field verification, tunnel blasting was performed, and the blasting results of sand stemming and, that of the STF-based stemming case were compared. The measurement results of the pressure in the blast hole showed that when the STF-based stemming material was applied, the pressure at the top of the blast hole was lower than in the sand stemming case, and the stemming ejection was also lower. The results of the field application verify that the excavation performance of the STF-based stemming case in the tunnel blasting was superior to that of the sand stemming case.

• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.505-514
• /
• 2015

In this study, a stabilizing equipment was developed to resolve the problems of existing stabilization construction method for contaminated soil. The field application and workability of the stabilizing equipment were verified through field demonstration tests and laboratory tests. The field application of the stabilizing equipment was identified through field demonstration tests. As a result of laboratory tests for field mixed soil, the mixing capability of stabilizer of the developed construction method was better than that of existing construction method.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.451-452
• /
• 2011

최근 들어 전력공급의 신뢰성 강화를 위해 고장을 미리 진단할 수 있는 기술이 요구되고 있다. 전력IT 국책과제로 개발된 전력설비의 감시진단장치 중 송전선로 감시를 위한 센서 및 센서네트워크를 제주 구좌읍의 스마트그리드 실증단지내 기기설치 설치가 진행중이다. 실증사업 1단계로 SG실증단지의 송전선로를 활용하여 성과물의 성능검증하기 위해 송전선로 감시시스템을 현장에 적용하여 성능을 확인한 실증사례 및 문제점에 대한 개선사항을 소개하고 향후 2단계로 추가 실증 방향 및 송전선로용 센서를 활용한 시스템 운영 전망을 살펴보고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6666-6672
• /
• 2015

Various reflectometry methods to locate power cable fault have been studied. But, most related studies has been verifying by simulation and laboratory test and study in conditions similar with real cable fault filed was not performed due to the absence of cable fault test field. Therefore, this paper design and construct test field for the standardized performance test and the operating education of cable fault location equipments. In the constructed test, open, short, half open and poor contact fault at 100m, 200m location of cable was produced and 1km cable role was installed for maximum distance measurement test. The test field will be used in the development and standardization of cable fault location technology, and te performance evaluation and certificate test of the related equipments.

• Journal of the Korea Society for Simulation
• /
• v.19 no.1
• /
• pp.41-51
• /
• 2010

A control system has been being developed by korean engineers for 500MW korean standard type fossil power plant with the advent of retrofit of old control system. Simulators have been used for digital I&C system pre-tests and validation tests in nuclear power plants. In this paper, the power plant simulator for control system V&V was developed in order to verify the developed control system prior to application to a power plant. The control models were developed using plant control system data, translator programs, and vendor manuals. The developed simulator was verified by steady-state test, load swing test, transient test and so on.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.74-75
• /
• 2011

EBOP(Electrical Balance of Plant)는 연료전지 출력인 DC 전원을 전력변환기술을 이용하여 계통 전원에 연계하는 계통 연계 인버터 시스템이다. 포스코파워에서 개발한 3MW급 EBOP 시스템은 국제 규격(IEEE std.1547, UL1741)에 의한 성능 검증 시험을 거치고 국내 2개 현장에 5기를 적용하여 운전 중이다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.571-572
• /
• 2015

한국전력공사에서는 2013년도부터 154kV급 변전소를 IEC 61850 기반의 변전소 자동화 시스템을 구축 운영중이다. 현재 구축 운영중인 디지털 변전소는 Station Level의 자동화 시스템이며, Process Level의 Full Digital 디지털 변전소 구축은 연구과제 성과물의 신뢰도 검증과 관련 기술 신뢰성 확보 시 구축예정이다. 본 논문에서는 Full Digital 변전소 구축을 위한 Process Level의 IED 및 엔지니어링 프로그램 개발에 대한 결과와, 개발된 시작품의 현장 실증 환경 구축에 대해 논하고자 한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.5
• /
• pp.421-428
• /
• 2022

The earthwork is a core process of all constructions, and compaction measurement of earthwork play an important role in improving productivity. The analog tests such as Plate Bearing Test and Sand-cone occupy current compaction measurement techniques. Due to advanced 4th Industrial Revolution, research on analog tests combined smart construction technology are actively conducted. DCPT (Dynamic Cone penetration Test), simpler and faster than conventional tests, has recently on rise. However, it is also an analog that measures data manually and has several disadvantages such as history management and data verification. The IoT-based DCPT system developed in this study combines digital wire sensors, mobile phones, and Bluetooth with conventional DCPT. Compare to conventional test methods, IoT-based DCPT has advantages such as performance time, single-person measurement, low cost, mobile-based management, and real-time data verification. In addition, a test bed was built to verify IoT-based DCPT. The test bed was built under similar conditions to the actual earthworks site through roller equipment. DCPT data obtained from 322 stations. As a result, IoT-based DCPT showed good performance, and the test bed was also showed stable results as the compaction was carried out.