• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.149-156
• /
• 2007

부산의 대표적 큰 계곡인 성지곡수원지는 남쪽으로 부산의 최대 도심인 서면을 향해 열려 있고, 그 이외의 삼면은 높은 산지로 둘러싸여 있다. 그래서 성지곡-서면-남항 일대는 낮에는 해풍이 곡풍(남풍)의 형태로 불고, 야간에는 산풍이 육풍(북풍)의 형태로 불고 있다. 이렇게 형성된 국지풍 순환의 규모와 특성을 평가하기 위하여, 계곡 입구와 도심인 서면 부근에 자동기상관측장치를 설치하여 특별 관측을 수행하였다. 관측결과 주간에는 서면 부근의 기온이 성지곡 입구보다 낮았고, 야간에는 이와 반대로 나타났으며 그 차이는 대체로 $3^{\circ}C$ 내외였다. 이것은 주로 지표면 가열의 의한 기단변질의 결과로 판단된다. 관측 일에 확인된 도로표면온도는 낮에 약 65도까지 상승하였으며 야간에도 30도 정도의 고온이 유지되었다. 이 연구에서는 현장관측으로 확인된 기단변질과정을 이해하기 위하여 2차원 대류모델을 이용한 수치실험을 수행하였다. 수치실험의 결과 낮에는 지표로부터 약 $150W/m^2$이상의 현열이 보급됨이 확인되었다. 야간에도 $10W/m^2$ 내외의 현열이 대기 중으로 보급되어 성지곡 수원지에서 발원된 냉기류를 가열시키고 있음이 확인되었다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.113-120
• /
• 2007

대구와 추풍령이 겨울철(2005년 12월${\sim}$2006년 2월)과 여름철(2006년 6월${\sim}$8월) 시간대별 일 최고기온, 일 최저기온, 일 평균기온과 풍속자료를 사용하였다. 추풍력은 대구에 인접해 있으면서 도시화의 영향을 상대적으로 매우 적게 받은 지역이다. 대상일은 대구와 추풍령의 겨울철과 여름철을 대상으로 일 최고기온과 다음날의 일 최저기온간의 차이가 $10^{\circ}C$이상인 날을 선정하고, 그 중에서 운량이 30%이하인 맑은 날을 선정하였다. 그리고 선정일을 대상으로 도심과 교외지역 야간(익일 18시${\sim}$다음날 06시까지)의 기온 냉각율을 조사한 결과는 다음과 같다. 기온하강은 두 지점 모두 풍속의 영향을 받음을 알 수 있었고, 또한 도시구조물이 많은 대구(도심)의 경우는 풍속이 강하더라도 건물에 의한 축열과 복사냉각의 억제에 기인하는 것으로 판단된다. 00시까지는 풍속과 냉각율이 비례하며 현열수송으로 냉각되고, 그 이후부터 일출까지는 풍속과 냉각율이 반비례하여 현열수송에 의한 가열의 경향을 확인할 수 있었다.

• Journal of Ocean Engineering and Technology
• /
• v.4 no.2
• /
• pp.85-93
• /
• 1990

A numerical study on the cylindrical packed bed sensible heat storage unit was accomplished by finite difference method. Relation between the heat storage rate and the mechanical pumping energy and the characteristics of the heat storage were investigated for various in let velocities and porosities. In this study, the numerical results are as follows: 1) The temperature distributions of solid and fluid rapidly reached the steady state as the heat capacity ratio was increased. 2) The efficiency of the heat storage was increased as the heat capacity ratio was decreased. For constant heat capacity ratio, however, the efficiency of the heat storage was increased at lower porosity. 3) It is very profitable to design the heat storage system such that the porosity is larger for the large flow rate and samller for small flow rate.

• Journal of Ocean Engineering and Technology
• /
• v.4 no.2
• /
• pp.235-235
• /
• 1990

A numerical study on the cylindrical packed bed sensible heat storage unit was accomplished by finite difference method. Relation between the heat storage rate and the mechanical pumping energy and the characteristics of the heat storage were investigated for various in let velocities and porosities. In this study, the numerical results are as follows: 1) The temperature distributions of solid and fluid rapidly reached the steady state as the heat capacity ratio was increased. 2) The efficiency of the heat storage was increased as the heat capacity ratio was decreased. For constant heat capacity ratio, however, the efficiency of the heat storage was increased at lower porosity. 3) It is very profitable to design the heat storage system such that the porosity is larger for the large flow rate and samller for small flow rate.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.365-369
• /
• 2003

이산화탄소 규제 대응 전략으로, 배출되는 온실가스를 분리, 회수, 처리하는 연구가 지속적으로 진행되고 있다. 현재 이산화탄소 저감 연구는 공정개발 초기부터 이산화탄소 배출을 방지하거나 분리하기 쉬운 형태로 설계하는 방식으로 전환되고 있다. 그 예로 고온 순산소 연소 시스템이 제안되었다. 이는 $CO_2$를 가장 효과적으로 저감시키는 방법 중의 하나로 연소에 사용되는 산화제로 순산소를 사용하여 원료를 절감할 수 있고 산소를 사용하기 때문에 배가스 중에 질소분율이 감소하여 배가스에 의한 현열손실을 줄일 수 있으며 또한 배가스 현열을 회수하여 산소를 고온으로 예열시켜 에너지를 추가적으로 절감할 수 있다. 이를 위해 산소를 선택적으로 투과시켜 고순도 산소를 제조할 수 있을 뿐만 아니라 산소제조 장치비를 절감할 수 있는 ITM (Ion Transport Membrane) 신소재 및 산소 투과 공정을 개발하고자 한다.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.402-407
• /
• 2008

This study is performed to investigate heat transfer characteristics for thermal performance of fin-and-tube sensible heat exchangers under the low air flowrate according to fin geometry combination and coolant flowrate control. Fins and tubes of samples were separated between front row and rear row. Experiment results are plotted heat transfer rate of each row, heat transfer coefficient and sensible heat ratio against water flowrate control of each row. It is observed that thermal performance can be enhanced by fin geometry combination and water flowrate control of each row under the low air flowrate.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.1
• /
• pp.176-182
• /
• 1988

The exergy analysis on the heat storage performance of the senible heat storage unit which consists of the heat storage material in the concentric annulus and the hot fluid flowing through the inner tube is performed. Heat transfer characteristics which are necessary for the performance of the exergy analysis is obtained from the energy balance equations and the second law of thermodynamics. As the index of heat storage performance, the exergy lossnumber $N_{s}$, and exergy storage ratio from the concepts of the second law of thermodynamics are defined. Results are ovtained for the grometry of the storage unit, the Biot number Bi, ambient temperature $T_{o}$ as parameters. From these results the exergy storage ratio can be considered as the efficiency of the hat storage unit and is introduced as a guide to design.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.12
• /
• pp.1057-1065
• /
• 2000

A sizing of sensible and latent energy recovery system with condensing heat exchanger is important to the design of a thermally controlled facilities. The transient system simulation program TRNSYS 14.2/IISiBat has been used to evaluate the energy consumptions of a thermally controlled facilities which consist of boiler, chiller and condensing heat exchanger, The boiler and chiller are selected based on the annual peak loads and controlled to maintain the setting temperature of $14~17^{\circ}C$. Simulation shows that the amount of sensible and latent energy recovered by heat exchanger is almost 20% of total heating load.

• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.130-135
• /
• 2002

Bypass air conditioning systems are divided into three types; outdoor air bypass, mixed air bypass and return air bypass system. Among bypass air conditioning systems, a return air bypass system is more effective than other two systems because it doesn't induce unconditioned outdoor air into conditioned room. The numerical study on the bypass air conditioning system shows this system can maintain indoor RH(Relative Humidity) less than a conventional CAV (Constant Air Volume) air conditioning system by adjusting face and bypass dampers at part load. A simulator was built to compare results of a numerical experiment and those of a simulator experiment. The results of the simulator experiment was nearly same as those of the numerical experiment; when a design sensible load (the ratio of sensible load to total sensible load) was 70 percent (at this time, RSHF=0.7), indoor relative humidity (in case of both numerical experiments and simulator experiments) was maintained below 60% specified by ASHRAE STANDARD 62-1999. The bypass air conditioning system is expected to be applied to many buildings where the Percentage of latent loads or air change tate is high.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.145-151
• /
• 2011

Evapotranspiration (ET) is an important process acrossa wide range of disciplines, including ecology, hydrology and meteorology.In this study, daily actual evapotranspiration (ETa) is based energy balance equation and considering high surface roughness length to estimate. This study was used variety of satellite data and ground observation data in Korea Peninsula from 1 January to 31 December 2009. In this study, sensible heat flux is one of the important parameters of ETa. Measurements of sensible heat flux are, however, complex and can't be easily obtained. So this study was used an empirical coefficient B to simplify estimate of sensible heat flux. The coefficient B in the ETa model requires a careful definition of aerodynamic resistance. So this study proposed ETa model considering aerodynamic resistance and high surface roughness length. This study was conducted validation in comparison of the proposed daily ETa results with Priestley-Taylor ETp.