• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1445-1449
• /
• 1996

To evaluate of active suspension, it is necessary for special equipment - so called Test Rig which can perfectly realize the road condition and the impact from the road. And most of the test rig systems controlling force accurately and rapidly consist of electro-hydraulic servo mechanism, and they need robust controller which can endure outer road change. But in the case of PID controller, we should choose its best gains by trial and error method, and once its gains are fixed, they cannot get changed, so we should reset PID controller gains respectively when the road is changed. Therefore based on the load pressure feedback compensation method, our aim at constructing electro-hydraulic test rig is not affected by various road disturbance.

• 제어로봇시스템학회논문지
• /
• 제5권8호
• /
• pp.932-940
• /
• 1999

In this paper, a new neural networks and neural network based sliding mode controller are proposed. The new neural networks are an mor self-recurrent neural networks which use a recursive least squares method for the fast on-line leammg. The error self-recurrent neural networks converge considerably last than the back-prollagation algorithm and have advantage oi bemg less affected by the poor initial weights and learning rate. The controller for suspension system is designed according to sliding mode technique based on new proposed neural networks. In order to adapt shding mode control mnethod, each frame dstance hetween ground and vehcle body is estimated md controller is designed according to estimated neural model. The neural networks based sliding mode controller approves good peiformance throllgh computer sirnulations.

• 제어로봇시스템학회논문지
• /
• 제9권9호
• /
• pp.669-678
• /
• 2003

A road-adaptive LQG control for the semi-active Macpherson strut suspension system of hydraulic type is investigated. A new control-oriented model, which incorporates the rotational motion of the unsprung mass, is used for control system design. First, based on the extended least squares estimation algorithm, a LQG controller adapting to the estimated road characteristics is designed. With computer simulations, the performance of the proposed LQC-controlled semi-active suspension is compared with that of a non-adaptive one. The results show better control performance of the proposed system over the compared one.

• 제어로봇시스템학회논문지
• /
• 제6권2호
• /
• pp.146-154
• /
• 2000

An $H\infty$ controller is designed for active suspensions of vehicles using 7-degree-of-freedom full-car model. Its performance robustness as well as stability robustness to system parameter variations and unmodelled dynamics are assured through the $\mu$-framework. The performance of the $H\infty$ controller is compared with that of a LQC controller in compute simulations. From the simulations it is found that the active suspension with the $H\infty$ controller reduces the acceleration and motion of the sprung mass in the heaving rolling and pitching directions when the car is driven on a normal road or through an asymmetric bump. The suspension stroke and the road holding capability are also improved with a relatively small level of power consumption. Overall the $H\infty$ controller shows a more robust performance than that of the LQG design.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.69-74
• /
• 1998

차량에서 인체가 노출되는 진동환경으로서 좌석과 바닥에서의 진동사이에 위상차가 존재하는 경우에 대한 인체의 반응을 주관평가 실험을 통해 분석하였다. 인체가 진동에 민감하게 반응할 뿐만 아니라 인체와 좌석으로 구성되는 진동시스템의 공진주파수와 관련된 2.5, 3.15, 4, 5, 6.3 Hz의 주파수에서, 진동의 크기를 각각 0.25, 0.4, 0.63, 1.0, 1.6m/s$^{2}$로 변화시켜 가며 위상차가 인체의 안락성에 어떻게 영향을 미치는 지를 분석하였다. 두 진동간의 위상차는 진동량이 적을수록, 또 주파수가 낮을수록 인체의 안락성에 악영향을 미쳤다. 진동의 진폭이 0.25m/s$^{2}$ 일 때 위상차가 180.deg.인 경우의 불편함은 0.deg.인 경우보다 2.5배 정도 큰 것으로 나타났다. 특히 현가장치가 장착된 의자의 경우에는 좌석과 바닥진동의 위상차이가 안락성에 미치는 영향을 정량적으로 파악하여 인체-좌석 시스템의 공진주파수를 선정해야 함을 알 수 있다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 하계 학술대회 논문집
• /
• pp.140-148
• /
• 2003

수송 중에 일어나는 과채류의 손실에 대한 주요 자료들을 정리하여 보면 주요 쟁점은 수송 중에 발생된 가속도와 주파수의 크기, 적재방법과 적재 위치, 3차원진동과 수송속도에 따라 농산물이 어떤 손상을 입으며 저장성과 상품성에 어떻게 영향을 미치는가 하는 문제로 요약된다. 그러나 우리나라의 농가에서 운반용으로 주로 사용되고 있는 동력경운기 트레일러는 현가장치와 진동흡수장치가 없는 것으로 농산물의 운송시에 발생되는 충격ㆍ진동 등으로 인해 많은 수송 손실이 예상된다. 결론적으로 트레일러에 전달되는 진동을 줄이기 위해서는 트레일러에 스프링 시스템을 장착하고, 엔진과 연결되는 히치 부분에 진동흡수 시스템을 장착하여 트레일러에 전달되는 진동을 최소화시키는 방법을 강구하여야 한다. (중략)

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.876-879
• /
• 1996

The vibration of an attractive magnetic levitation(Maglev) vehicle transportation system is caused by the irregularity of the guideway track and the performance of the suspensions of the Maglev system. It is essential for us to give attention to the secondary suspension of the vehicle system as it determines the ride quality. In order to improve the ride quality and running stability, active secondary suspensions have been developed and applied to the vibration problems. This paper analyzes the performance of the active secondary suspension which is applied to an attractive magnetic levitation vehicle system running on a rough track. The dynamics of the suspension system and the optimal control problems are studied. According to the transient and frequency response analyses to the track disturbance, the ride quality of an attractive Maglev vehicle has been improved by applying the designed LQR active controller, and it has been confirmed that this improvement was also influenced by the configuration of the system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.871-875
• /
• 1996

The Output feedback linear quadratic regulator control is applied to the design of active suspension system using 7 DOF full car model. The performance index reflects the vehicle vertical movement, pitch and roll motion, and minimization of suspension stroke displacements in the rattle space. The elements of gain matrix are approximately decoupled so that each suspension requires only local information to generate the control force. The simulation results indicates that the output feedback LQ controller is more effective than purely passive or full state feedback active LQ controllers in following the road profile at the low frequency range and suppressing the road disturbance at the high frequency ranges.

• 제어로봇시스템학회논문지
• /
• 제22권3호
• /
• pp.177-185
• /
• 2016

This paper presents a method to design a controller for active suspension with 1-DOF decoupled models. Three 1-DOF decoupled models describing vertical, roll and pitch motions are used to design a controller in order to generate a vertical force, roll and pitch moments, respectively. These control inputs are converted into active suspension forces with geometric relationship. To design a controller, a sliding mode control is adopted. Frequency domain analysis and simulation on vehicle simulation software, CarSim$^{(R)}$, show that the proposed method is effective for ride comfort.

• 제어로봇시스템학회논문지
• /
• 제16권11호
• /
• pp.1096-1103
• /
• 2010

This paper proposes CDC (Continuous Damping Control) algorithm and verifies in multi-body dynamic vehicle. In order to distinguish a road profile on driving, waviness calculated by the filtered vertical-accelerations of sprung and unsprung masses is introduced. Sky-hook control is used at a low waviness road and constant damping level control is used at a high waviness road, where the hard damping level is determined by waviness, roll rate, acceleration, and deceleration. The damping levels of ride, anti-roll, anti-squat, and anti-dive modules are calculated by tuning parameters which is dependent upon vehicle velocity. Therefore this high tunable algorithm is useful to improve the ride and handling performance under various driving conditions. In the simulations, tire and dampers are modelled by SWIFT (Short Wavelength Intermediate Frequency Tire) model and 1st order delay model, and results are compared with conventional damper's.