• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.909-914
• /
• 2009

A suspension is the most prior apparatus to decide vehicle's running safety and ride comfort, also the suspension stiffness is the most important parameter for the designing of the vehicle. Providing the strong stiffness with the primary suspension in order to improve the running safety with high speed, but it causes a problem with a curve running performance of a railway vehicle. Therefore, many studies deal with the optimal value of suspension stiffness. In this paper, we aim to optimize the suspension system to improve running safety by varying stiffness values of railway vehicle suspension. We have proceeded an analysis by design variables which are position, length, width, stiffness and damping coefficients of primary and secondary suspension to optimize the suspension characteristics. As a result of the optimization, we verified that the derailment coefficients of inside and outside of wheel are decreased in comparison with initial model.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.175-181
• /
• 2007

본 연구에서는 지하철용 전동차의 현가장치를 구성하는 1차 현가장치 및 2차 현가장치의 강성 및 감쇠지수 변화가 전동차의 상하진동에 미치는 영향을 분석하였다. 실제 운행 중인 전동차에 대하여 액슬박스, 대차, 객차에서 측정된 진동 데이터를 바탕으로 대차와 차체로 구성된 2자유도계 해석모델을 생성하였고, 실측된 윤축의 진동을 입력신호로 하여 수치해석을 수행하였다. 1, 2차 현가장치의 강성 및 감쇠지수의 변화에 따른 응답을 고찰한 결과, 차량의 상하진동에 지배적인 영향을 주는 설계변수는 2차 공기스프링의 강성임을 알았다. 또한 이러한 결과는 ADAMS/RAIL 전산해석을 통해서도 검증할 수 있었다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.186-197
• /
• 1998

An analysis of handling performance including the compliance effects is performed. Using the primitive design data of suspension systems, a kinematic model and the three kinds of compliance models are developed. The wheel alignments curves are obtained with the multibody dynamic analysis program ADAMS. The compliance effects of each model are discussed. Since the proposed analysis only requires the raw design data, the better prediction of wheel behaviors is possible in suspension design stage.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.143-147
• /
• 1990

자동차는 주행시에 노면가진으로 인하여 진동을 받게 되는 데 이러한 진동 은 운전자의 승차감을 저하시킬 뿐만 아니라 화물과 차량 부품을 파손시키 는 원인이 되기도 한다. 노면가진력은 주로 현가장치를 통하여 차량에 전달 되어 차량의 진동을 유발하게 되므로 승차감을 향상시키려면 노면가진을 효 과적으로 차단할 수 있도록 현가장치를 설계하여야 한다. 이를 위하여 본 논 문에서는 차량을 현가장치의 형식에 따라 3가지 종류로 구분한 다음 각각을 12자유도로 모델링하여 노면이 불규칙(random)한 도로를 주행할 때의 승용 차의 진동을 해석하고, 현가스프링의 강성과 쇼크 압소바의 감쇠 값이 자체 수직 가속도 유효치(rms value)와 현가장치 유효행정(rms stroke length)에 미치는 영향을 분석하였다. 차량의 운동방정식은 현가장치의 비선형 특성을 고려하였기 때문에 미소 각 운동의 가정에도 불구하고 비선형 방정식이 된 다. 운동 방정식의 해는 4차 Runge-Kutta 적분법을 사용하여 수치해석으로 구하였다.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.507-512
• /
• 2001

As needs for substitution of excessive road-oriented transport by the railroad increase, we proposed the guideline for development of the high speed freight car up to 150km/h through analyzing the critical speed of welded-type freight car employed and investigating the improvement in its maintenance. This study, the proper design parameters of conical rubber spring was determined to meet the vibration performance.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.311-319
• /
• 2017

The primary suspension system of a railway vehicle restrains the wheelset and the bogie, which greatly affects the dynamic characteristics of the vehicle depending on the stiffness in each direction. In order to improve the dynamic characteristics, different stiffness in each direction is required. However, designing different stiffness in each direction is difficult in the case of a general suspension device. To address this, in this paper, an optimization technique is applied to design different stiffness in each direction by using a conical rubber spring. The optimization is performed by using target and analysis RMS values. Lastly, the final model is proposed by complementing the shape of the weak part of the model. An actual model is developed and the reliability of the optimization model is proved on the basis of a deviation average of about 7.7% compared to the target stiffness through a static load test. In addition, the stiffness value is applied to a multibody dynamics model to analyze the stability and curve performance. The critical speed of the improved model was 190km/h, which was faster than the maximum speed of 110km/h. In addition, the steering performance is improved by 34% compared with the conventional model.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.121-127
• /
• 2003

The stiffness of a bushing in a suspension is extremely important for the overall performance of the suspension system. A new measurement system including the flexible jig was developed to measure the multi-directional stiffness of bushings. To overcome the disadvantage of building each individual jig for each type and size of a bushing, we designed the flexible jig which can accommodate numerous bushings of similar shapes and sizes. Upon using the novel design of the flexible jig in the industry, we could successfully measure the torsional and conical stiffness of many bushings and apply the data for the prediction and evaluation of the performance of a suspension system, which would assist designing the optimal suspension system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1434-1439
• /
• 2012

Vehicle is a dynamic system combined with various parameters. Dynamic characteristics of a vehicle can vary with the change of these parameters. To investigate the effect of the design parameter on vehicle handling performance the sensitivity analysis is carried out by the numerical method. The vehicle model is described by equivalent cornering stiffness that considers parameters of suspension and steering system. As the analysis results show the effect on the static and dynamic characteristics of the vehicle system, the sensitivity analysis can be used for synthesis of the design parameters to improve the vehicle handling characteristics at the design stage as well as during the vehicle test under development.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.287-293
• /
• 2007

This paper proposed modelling and design method in suspension system design to analyze active suspension equipment by adopting intelligent robust control theory. Recent in the field of suspension system design it is general to adopt active control scheme for stiffness and damping, and connection with other vehicle stability control equipment is also intricate, it is required for control system scheme to design more robust, higher response and precision control equipment. It is known that active suspension system is better than passive spring-damper system in designing suspension equipment. We analyze suspension system with considering location of front-rear wheel and driving velocity, then design robust control system. Numerical example is shown for validity of intelligent control system design in active suspension system.

• Journal of the Korean Society for Railway
• /
• v.11 no.1
• /
• pp.39-44
• /
• 2008

A two degree-of-freedom model for the bogie and car body of an EMU(Electrical Multiple Unit) was implemented on the basis of the experimental data which was actually measured during the running test of an EMU. The air spring of the EMU was modeled using Nishimura's air spring model to accommodate viscoelastic characteristics. Numerical simulation for the variation of th e design parameters of the suspension system shows that reduction of the stiffness of the air spring by decreasing the internal pressure of the air tank or increasing the size of the auxiliary tank can reduce the bounce of the car body within the stability range of the suspension system.