• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.387-392
• /
• 2008

Next Generation High Speed Train having a distributed electrical motor system has just been developing to aim the experimental maximum speed at 400km/h since August, 2007. This project is in stage of concept design and so, it needs to take some review and analysis the characteristics of suspensions on the view of concept design. A train dynamic modeling is modified with the one car model presented in the previous conference and it was extended to 6cars models having the same suspensions and added some connection's characteristics between the cars with Vampire program. It is used to analyze the effect on the dynamic performances according to the variation of primary and secondary suspension characteristics in the condition of 6 cars configuration. The results would be useful to manage the potential risks in the next stage of basic and critical design that will be done by the manufacturing company.

• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3357-3362
• /
• 2014

본 연구에서는 자동차가 노면을 주행 시 발생되는 진동에너지를 수집하여 차량의 배터리를 자가 충전할 수 있는 현가장치에 적용 가능한 공진형 선형 발전시스템을 설계하였다. 논문에서 제안된 선형 발전기는 기존의 발전기들과는 달리, 비교적 작은 에너지 원천인 노면의 진동에 더욱 효과적으로 대응하기 위해 공진 현상을 최대한 활용하는 설계를 지향했으며, 한정된 공간인 차량 현가장치에서의 선형 발전기의 발전 효과 검증 및 향후 연구 진행의 가능성을 판단하기 위해 수치해석적 방법을 활용하여 시스템의 동적 해석을 위한 기본 입력 속도를 도출하고 시스템의 목표인 발전 기능에 대한 예측을 위해 전자기 유한요소해석을 수행하였다. 본 연구에서 정상적인 발전 기능의 가능성을 확인한 공진형 선형 발전 시스템이 최근 자동차 산업의 큰 주축을 이루고 있는 하이브리드형 자동차 및 전기 자동차에 적용된다면, 각종 전장장치 및 배터리의 구동 및 성능유지에 도움을 줄 수 있을 것이다.

• 한국음향학회지
• /
• 제22권6호
• /
• pp.512-518
• /
• 2003

본 논문에서는 차량시스템의 진동효과를 고려하는 내구평가를 위한 공진내구해석이 수행된다. 공진내구해석을 수행하는데 있어서 주파수응답과 주파수영역의 동하중이 사용된다. 다물체 동역학해석, 유한요소해석 및 피로수명예측기법이 가상내구 평가를 위해 적용된다. 주파수응답과 동하중이력을 얻기 위해 차량 다물체 모델을 이용하여 전형적인 파트홀과 벨지안로를 통과하는 컴퓨터 시뮬레이션을 수행한다. 공진내구해석기법을 사용하여 승용차의 후방 현가장치에 대한 내구평가를 수행하고 그 결과를 준정적내구해석결과와 비교한다. 본 연구를 통하여 차량 시스템의 공진주파수를 고려한 피로수명을 초기설계 단계에서 효과적으로 평가할 수 있다는 것을 알 수 있다.

• 대한기계학회논문집A
• /
• 제36권9호
• /
• pp.1003-1008
• /
• 2012

실시간 차량동역학 해석을 위해서는 효율적인 차량 모델이 필요하게 된다. 효율성을 높이기 위해 집중질량모델로 가정하면 현가장치의 특성을 고려하기 어렵게 되며, 현가장치의 특성을 모두 고려한 다물체동역학 모델에서는 효율성이 떨어진다. 그러므로 본 논문에서는 다물체동역학 모델링을 사용하되 해석의 효율성을 저하시키는 현가장치의 각종 요소들의 효과는 기구정역학 실험으로 추출된 특성그래프로 대체함으로써 효율성도 기하고자 시도하였다. $6{\times}6$ 차량을 차체와 휠로 구성된 차량으로 모델을 정의하였고, 다물체동역학 모델인 ADAMS 결과와 비교하여 실험적 모델의 유용성을 검증하였다. 그리고 검증된 실험적 차량모델을 RT-LAB을 활용한 실시간 시뮬레이션 환경에 삽입하여, 실시간성 시뮬레이션의 가능성을 검증하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.476-483
• /
• 2000

Like other vehicles, the suspension elements of railway rolling stock have influence on running stability and ride quality. Thus, faults detection for suspension elements is important to prevent an accidents of train and to ensure safety against derailment. This study was started to grasp the feasibility of diagnostic method for the suspension elements of bogie without disassembling. Through several tests by running test rig, we found that fault detection for suspension elements was possible. Here, we describe some results.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.146-153
• /
• 2005

Structural design of the torsion beam rear suspension is investigated by calculating warping of the torsion beam. Since the longitudinal displacement in the cross section of the torsion beam due to torsional moment causes normal stress across the beam restrained from outside at both ends, the profile of torsion beam needs to be designed considering the warping. Warping function of the beam is derived with the parameters of cross section fur the arbitrary shapes of torsion beam profiles assuming thin-walled open section. From comparing the warping calculated for two different beam profiles, the design method for the torsion beam in the view point of low stress is discussed. It is shown that the gusset used to reinforce the torsion beam can be optimized in accordance with warping shape. The method to fix the end point of the gusset is proposed to minimize the stress concentrated on the end point of the gusset produced during torsional moment. The result from finite element analysis shows the stress is minimized when the height of gusset end point is coincident with the point where warping of the beam is minimized.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.984-988
• /
• 2010

In Korea, the next generation high-speed train, whose target is maximum speed of 400km/h and operating speed of 370km/h, has been developed since 2007. In this paper, the safety of the next generation high-speed train is compared UIC 518OR under the malfunctioning situation of the suspension system. The bogie of the next generation high-speed train has two suspensions. Two different vehicle models of the next generation high-speed train are created by using VAMPIRE and ADAMS/Rail, which are specialized to design railway vehicle. And Those models are showed same dynamic properties. First of all, the sensitivity analysis of ModelCenter is performed using model of VAMPIRE. One suspension element which has significant effects on the safety are selected by result of the sensitivity analysis. And then, the dynamic analysis when the suspension element is broken is performed using ADAMS/Rail. The 30km track between Pungsegyo and Biryong tunnel in Gyeongbu High-speed Line was used at the dynamic analysis. The estimated value is found by using the normal method of UIC 518OR. The estimated values on the normal/fault state and the limit values of UIC 518OR are compared. Finally, the safety of the next generation high-speed train is verified.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.183-188
• /
• 2009

The High speed electrical multiple train having a distributed electrical motor system has just been developing to aim the experimental maximum speed at 400km/h since August, 2007. This project comes in stage of basic design and so, it needs to take some review and analysis the characteristics of suspensions on the view of basic design. The vehicle model for dynamic analysis is made from the concept design model that used for the preliminary design review with Vampire program and it is modeled with three linear secondary dampers and two shear springs separated from the bush elements in previous model. The optimization technique is applied to search the proper range of linear characteristics for the suspension elements to satisfy the stability performance at speed 130m/s (about 460km/h). The results shows there are some optimum points according to the variation of primary and secondary suspension characteristics and it would be useful to make a decision to select the proper suspension elements in the precision design that will be done by the manufacturing company.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.378-382
• /
• 2005

The opening of high speed railway upgraded our land transportation speed limit, causing lots of changes including living and culture and also paving the way for stepping up the railway technology. However, it is also true that we had a limit to adopt the existing railway system structured for 150km/h to the new structure requiring a higher speed of approximate 300km/h due to technological, based on the time and experience. More importantly, heading toward a step of operating such a high speed railway system, it has been practically and quickly proposed that the railway needs high speed railway engineering, maintenance technology of parts of the vehicles to have a stable maintenance foundation and localization of major parts. Therefore, this study was intended to research the actual displacement characteristics in runningg on an actual track for the purpose of developing the protective and maintenance technology of springs and dampers, which are core parts among suspension elements of a high speed railway vehicle. For this, it was researched the actual vehicle test and its interpretation centered on primary spring, which is used for the suspension system of a bogie, body-body dampers and body-bogie yaw damper. Also, to analyze the displacement characteristics of suspension system in the actual conditions of high speed railway vehicles, a vehicle‘s dynamic characteristics was analyzed and interpreted. At the same time, a tester for measuring the actual displacement of such suspension elements was designed and attached to actual vehicles, to measure the displacements that occur in running it on the Seoul-Busan line, one of major lines serviced by KTX. The displacement data gained from the test with actual vehicles was analyzed for its displacement distribution depending on the service sections and frequency, with which the valuable data necessary for any potential breakdown or maintenance in the future could be obtained.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.620-623
• /
• 2000

The leaf spring is generally used effectively in load supporting because it has tension-diffused function in comparison with other springs. Nowadays the leaf spring is used widely in the suspensions of automobile and trains. The stiffness and the damping characteristics of the leaf spring being essential for the performance of vehicles, the exact evaluation is required. Various approximate formula are normally used for the leaf spring design. however, accuracy and trust are decreased because the contact and frictional characteristics between leaf plates are generally neglected. In this paper, nonlinear stiffness matrix of the leaf spring is solved by contact-element applying FEM for considering the contact and frictional characteristics between leaf plates. The results of proposed FE model are compared with test data.