• Journal of the Ergonomics Society of Korea
• /
• v.27 no.4
• /
• pp.37-44
• /
• 2008

To design the cockpit of Korean helicopter, anthropometric data for Korean helicopter pilots as a target population is necessary. The present study measured the body sizes of Korean helicopter pilots to design the cockpit of Korean helicopter, and compared the measurements with those of Korean civilian and the US Army. The sample size was 100 which determined by a statistical analysis. Anthropometric measurements were collected for 100 samples (male = 94, female = 6; age group = 20~40) of Korean helicopter pilots by applying standard measurement protocol. To compare three anthropometric data, Korean civilian and US Army data were controlled by considering age group (20~40) and gender ratio (male: female = 9:1) of Korean helicopter pilots. The average body sizes of Korean helicopter pilots were mostly similar to those of Korean civilian, however, lower limb related variables (hip breadth, popliteal height and thigh clearance) and shoulder-to-elbow length were significantly greater (1~7%) at α=0.05. Furthermore, the average body sizes for Korean helicopter pilots regarding lower limb length and thickness were significantly smaller than those of the US Army (1~12%); however, the average body sizes for Korean helicopter pilots regarding upper body related variables (sitting height, sitting eye height, and acromial height) and hip breadth were significantly greater (0.7~1.9%). Lastly, size variability for Korean helicopter pilots was significantly smaller than those of Korean civilian and the US Army. Anthropometric data for Korean helicopter pilots of the present study was applied to design and evaluate a Korean helicopter cockpit.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.731-738
• /
• 2015

The rapid prototyping process and development tool which enable the control law evaluation efficiently are needed to minimize the development cycle, cost and risk of aircraft flight control system. This paper describes a development process that integrates the designed control law into HETLAS to evaluate simulation effectively using nonlinear mathematical models. The desktop engineering simulator was developed using HETLAS for the piloted simulation evaluation of a various control modes and the procedure was developed, which quickly integrates the HETLAS into HQS(Handling Quality Simulator) and HILS(Hardware In the Loop Simulation) environments. This paper presents a rapid prototyping process using HETLAS that significantly shortens the integration process of the control law into the nonlinear math model, HETLAS, and allows the control law designs to be quickly tested in the piloted simulation and HILS environments.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.242-250
• /
• 2004

This paper describes the detection method of wire-like obstacles using millimeter-wave radar system. Passive sensor like CCD camera can be used for the detection of high power electric cables on the hills or mountains and it can give very good quality of obstacle target information. But this system is very limited to use by bad weather condition. The detection capability for different diameters of wire targets using millimeter radar system have been accomplished. To simulate the target on the moving helicopter, rotating targets are used with fixed radar system. In the experiment 11mm, 16mm and 22mm diameter of wires have been detected in single, two and three wires in one position. The detected signal from single wire was very clear on gray level image. Three wires placed very closely together could be recognized in range, cross range image plane. For two and three wires, blur effect due to mutual scattering effect is observed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.407-408
• /
• 2016

A drone has been popularized to such an extent as to be seen in the near parks recently. The drone refers to an unmanned aerial vehicle(UVA) which can fly and be steered by a radio wave without a pilot and it has a airplane or helicopter shape. The drone was first started to be used from military purpose, but its usage has been expanded to the private such as broadcast shooting, crop-dusting, field discovery and hobby. However the drone that we can see often in the market is expansive, hard to be repaired when it broken down and has a discomfort of the short flight time. In this paper, to solve an uncomfortable talk on the cheap ATmega128 Using (Quad copter) drone for implementation. Axes gyroscope and accelerometers mcu between posture an attitude control, communications through drone control, pid. Receiver input them into transmitter signals of movements to control drone c the programming was implemented in on the basis of language.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.9
• /
• pp.81-90
• /
• 2016

Recently drones have become popular enough to be one of the hobby. The drone refers to an unmanned aerial vehicle which can fly and be steered by a radio wave without a pilot and it has a airplane or helicopter shape. The drone was first started to be used from military purpose, but its usage has been expanded to the private such as construction site, crop-dusting, field discovery, freight shipping and drones to prevent cheating. However the drone that we can see often in the market is expansive, hard to be repaired when it broken down and has a discomfort of the short flight time. In this paper, to solve an uncomfortable talk on the cheap 8-bits microcontrollers ATmega128 Using drone for implementation. Axes gyroscope and accelerometers mcu between posture an attitude control, communications through drone control, pid. Receiver input them into transmitter signals of movements to control drone c the programming was implemented in on the basis of language. drone using ATmega128 microcontroller is possible hovering, By utilizing a pin that are not required for control it can be used as a drone for a variety of uses.