• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.574-575
• /
• 2018

The generation of redundant data according to the spatial-temporal correlation in a wireless sensor network that reduces the network lifetime by consuming unnecessary energy. In this paper, data collection experiment through the particulate matter sensor is carried out to confirm the spatial-temporal data redundancy and we propose permitted limit setting method for data transmission to solve this problem. In the proposed method, the data transmission permitted limit is set by using the integrated average value in the cluster. The set permitted limit reduces the redundant data of the member node and it is shows that redundant data reduction is possible even in a variable environment of collected data by resetting the permitted limit in the cluster head.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.6
• /
• pp.496-504
• /
• 2003

In this paper, the error tolerance of each array element to ensure a given specified error level for the array pattern is analyzed using the Genetic Algorithm. In the conventional deterministic method for synthesis of sonar way problems the computational resource required in the simulation grows rapidly as the number of way elements increases. To alleviate this numerical inefficiency, the Monte-Carlo method may be considered as an alternative technique for array syntheses. However, it is difficult to apply the method to the synthesis of array patterns because of its relatively lower accuracy in spite of moderate computational complexity. A new analysis method for estimating error tolerances in sonar arrays is Proposed since the Genetic Algorithm has significant promise to efficiently solve way synthesis problems. Through several numerical tests in linear and planar arrays, it is demonstrated that the proposed method can provide accurate results for error tolerances of sonar arrays.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.164-181
• /
• 2023

In a low speed limit environment, the speed limit tolerance of automated traffic enforcement devices is very high, which is one of the main factors for the low compliance rate. Therefore, in this study, we aimed to the improve the speed limit tolerance and to present a new standard. The effects of the operator and user errors that can cause speeding by drivers were analyzed. Based on the results of the analysis, an improvement of the tolerance was proposed by applying an error in the enforcement device and GPS speed. In addition, long-term expected safety effects such as the accident rate and severity were estimated from the operator's perspective when improving the tolerance. As a result of the estimation, the speed limit compliance rate, accident rate, and change rate of a number of severe accidents due to speed change, and pedestrian traffic accident mortality rate were all improved in all speed limit environments. The introduction of the proposed improvement is expected to improve road safety significantly.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.333-336
• /
• 2000

본 논문에서는 Monte-Carlo simulation과 deterministic simulation을 합성한 방법으로 특성허용 패턴을 만족하는 개별소자의 오차범위를 가중치에 따라 차별적으로 규정을 하였다. 일반적으로 사용되는 통계적인 방법은 불규칙한 특성을 갖는 랜덤오차를 정규분포를 갖는 랜덤변수로 모델링을 하여 허용 패턴으로부터 오차의 범위를 규정하는데, 이렇게 구해진 범위는 개별소자의 가중치의 영향을 고려하지 않고 일률적인 특성을 나타낸다는 단점이 있다. 이에 반해 deterministic simulation을 통해서 얻어진 오차의 범위는 가중치에 따라서 상대적인 범위를 결정할 수 있지만 해석 하고자하는 배열소자의 개수에 따라서 계산량이 지수승으로 증가하는 단점이 있어 10개 이상의 소자를 갖는 배열에는 적합하지 않다. 이러한 단점을 보완하기 위해서는 본 논문에서는 Monte-Carlo simulation과 deterministic simulation의 합성적 방법을 사용해서 배열소자의 증가에 따른 계산량의 증가를 줄이면서 각 가충치에 따라 상대적인 개별오차의 허용범위를 결정하였다. 그리고 이렇게 규정된 오차의 범위를 간단한 모의 실험을 통해서 검증하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.221-229
• /
• 2002

In thin paper, error tolerance of each array element which satisfies error tolerance of beam pattern is decided by using the Monte-Carlo method. Conventional deterministic method decides the error tolerance of each element from the acceptance pattern by testing all cases, but this method is not suitable for the analysis of large number of array elements because the computation resources increase exponentially as the number of array elements increases. To alleviate this problem, we applied new algorithm which reduces the increment of calculation time increased by the number of the array elements. We have validates the determined error tolerance region through several simulation.

• Progress in Medical Physics
• /
• v.19 no.2
• /
• pp.113-119
• /
• 2008

In this study, we have estimated error of calculation results for 5-type RTP systems and investigated a toleration for error of the RTPs referenced from the evaluation items of AAPM Report-62. For this study, we have introduced the concept of 'normal dose rate(NDR)' and compared the results of experiment and calculation from RTPs at the same reference level. The results from all RTPs were satisfied at various field shapes and heterogeneous phantom materials except the surface irregularity.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.471-474
• /
• 2004

본 논문에서는 유전자 알고리즘을 이용하여 소자간의 상호결합이 고려된 경우 빔 패턴 오차의 허용범위를 만족하는 개별소자의 허용오차를 분석하였다. 소나 배열을 통한 빔 패턴은 개별소자에 인가되는 가중치 뿐 아니라 소자간의 방사임피던스 즉 자기방사 임피던스와 음원 상호간의 음향적 간섭에 의한 상호방사 임피던스에 따라 달라진다. 본 논문에서는 유전자 알고리즘을 이용하여 상호결합이 있는 경우에 대해 1 차원과 2 차원 배열에서 주어진 빔 패턴 허용 범위를 만족하는 각 소자별 허용오차 분석하였다.

• Proceedings of the KIEE Conference
• /
• 2006.05a
• /
• pp.51-56
• /
• 2006

저압 수용가에 적용되고 있는 3상 4선식 배전방식은 단상 및 3상 부하를 동시에 이용할 수 있는 장점이 있는 반면 부하의 불평형 운전에 의한 임피던스의 변화로 전압 불평형이 발생하게 된다. 이들 부하 중에서는 선형 및 비선형 부하가 사용될 경우 고조파의 발생으로 부하에 나쁜 영향을 미칠 수 있다. 그래서 본 논문에서는 전압 불평형율의 허용범위를 제한하기 위해 전압 불평형율에 대한 측정방법, 불평형율의 계산방법 그리고 현장 측정 등을 통해 도출된 결과들을 분석하여 가장 효과적인 허용범위를 제안하였다.

• Journal of the Korean hospital association
• /
• v.34 no.3 s.295
• /
• pp.22-29
• /
• 2005

• Journal of the Korean hospital association
• /
• v.34 no.3 s.295
• /
• pp.39-52
• /
• 2005