• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.418-419
• /
• 2008

관로에 케이블을 포설할 때에는 최대포설장력(Maximum Pulling Tension Factors)과 허용측압(Sidewall Bearing Pressure)이 고려되어야 한다. 최대포설장력은 케이블의 무게와 관로의 마찰계수에 의해 계산이 되고 관로의 경간에 의해 변화하게 된다. 측압은 관로의 곡률반경, 포설장력, 케이블 무게 등과 직접 관련이 있다. 관로의 곡률반경은 현장에서 도로의 길이와 현의길이, 호의 높이 등을 측정하여 구하기도 하고 도면상에서 계산에 의해 구하기도 한다. 곡률반경과 포설장력, 측압의 관계성을 비교해 보면 포설장력은 곡률반경의 영향을 거의 받지 않지만 측압은 곡률반경의 영향을 크게 받는다. 허용측압이상의 측압이 굴곡부에서 관로와 케이블사이에 발생하면 관로와 케이블이 손상되기 때문에 관로 설계시에는 측압을 반드시 고려하여야 된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1729-1733
• /
• 2007

In this paper, we have carried out some tests for analyzing the effects of optical fiber characteristics and piping structures in designing a Customer Cabling System with optical fibers. In this tests, the loss characteristics due to the number of curvatures and the radius of curvature with bending to establish an optical fiber have analyzed particularly. We can confirm that the test results satisfy the current technical regulations in both cases of the number of curvatures and the radius of curvatures. Also, in particular, since there is no loss in an optical cable under the current radius of curvature, that is 30mm, the radius criteria of curvature needs to be revised. These tests results will be so useful to revise and establish a customer cabling system for FTTH.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.479-480
• /
• 2011

관로내 케이블 포설시 케이블 허용장력이 포설장력을 초과하지 않도록 주의해야 한다. 또한, 케이블 포설 도중 Kink가 발생하지 않도록 케이블 드럼을 반드시 세워서 포설해야 하고, 케이블 드럼을 눕혀서 포설해서는 안 된다. 또한, 허용전류를 고려하여 케이블 상호간의 간격을 일정하게 유지해야 한다. 관로 내 케이블을 설치할 경우 직선구간 뿐 아니라 굴곡구간에도 설치되므로 포설측압이 허용측압을 초과하지 않도록 시설해야 한다. 측압에 견디기 위해서는 케이블 포설시 곡률 반경을 케이블 외경의 10배 이상으로 유지하는 것이 중요하다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7C
• /
• pp.529-533
• /
• 2008

In this paper, we have analysed the channel loss characteristics of optical fiber due to the changing of radius of curvatures and the number of cable banding, and due to the connection between different modes of fiber to derive revisions of technical regulation for FTTH. The results of test show that all conditions are satisfied the criteria(allowable radius of curvatures, 30mm) with the exception of conditions of 10mm radius in single mode case and show that source of light in multi mode fiber can't be delivered to single mode fiber. henceforth, we should study more intensively on the standards of connection between cables in the different modes.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.4
• /
• pp.5-17
• /
• 2021

In this paper, three-dimensional analysis of the curved levee was performed according to curvature angle, and radius of curvature to investigate the property of seepage. The hydraulic gradients in the curved parts of levees decreased in the outer levee and increased in the inner levee, compared to the two-dimensional analysis. The smaller the curvature angle and the radius of curvature, the larger the change of the hydraulic gradient, compared to the two-dimensional analysis. The effect of curvature radius on the hydraulic gradient was greater than the curvature angle. As a result of evaluating the piping safety factor for the critical hydraulic gradient, the safety factor was increased by 2~5% in the outer levee and decreased by 4~12% in the inner levee, compared to the two-dimensional analysis. Considering this reduction, if the two-dimensional analysis is performed on the curved part of the levee, and if designed the safety factor for piping is 0.1~0.3 greater than allowable FS=2.0, the safety factor of the curved part is slightly reduced, but there is no difficulty in securing stability.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.112-115
• /
• 2006

본 논문에서는 무인 생산 공정의 선삭 가공 시 발행하는 칩의 처리에 관한 연구를 수행하였다. 선삭시 발생되는 칩은 부품의 정밀도와 표면 조도를 저하시키는 등 품질 저하와 함께 생산성을 저해하는 요소가 되기도 한다. 이러한 칩을, 칩 브레이커를 사용하여 작은 곡률 반경으로 절단함으로써 칩 제거를 효율적으로 제어한다. 그와 함께, 다구찌 기법을 적용하여 최적의 조건으로 칩 브레이커 형상 설계 인자를 도출하는데 그 목적이 있다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.45-49
• /
• 2001

The length and the breadth or a very large floating airport are determined by airplane types and airport facilities. However, the depth affect not only the structural strength but also the functional requirement such as a possibility of taking off and landing. The optimization problem for determining the depth is to select a design so that the cost is minimized. In this paper, a general arrangement and a method to decide the depth are proposed. Strength, functional requirement, and possibility of occurrence of deck wetness and slamming are considered in order to determine the depth of structure. Hydrodynamic forces of the diffraction and radiatin problems are predicted by applying the source-dipole distribution method, and the structural responses are obtained by the finite element method.

• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.405-410
• /
• 2000

We propose a novel design concept to improve extinction ratio by minimizing $Cv_e-Cv_o$ . Improvements of loss and fabrication error limit are also obtained by this hybrid design of the lateral shift and curved waveguide to control transfer coefficients, $Cv_e and Cv_o$ . The concept of lateral shift merges two transfer coefficients, and additional curved waveguide controls mode profile asymmetrically to help this minimizing effect of $Cv_e-Cv_o$ with no serious decrease in transfer efficiency. For a given InP based waveguide structure, the mode propagation analysis with an effective index approximation provided a calculational improvement of extinction ratio to -39 dB and fabrication error limit to $57.19\mu\textrm{m}$, with a structure design of $300\mu\textrm{m}$ waveguide curvature and $0.1\mu\textrm{m}$lateral shift. shift.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.747-757
• /
• 2015

The main purpose of this study is to investigate the static behavior of a horizontally curved prestressed concrete (PSC) girder. A 30m long full-scale curved PSC girder with 80.0m radius is fabricated by a portable curved form system. Deflections and concrete strains at the middle of span were measured. The obtained experimental results have been compared to those from F.E.A. analysis. When a initial crack developed, the applied load was 1.3 times the service design load and the vertical deflection at the middle of span satisfied the requirement for a live load state according to the Korea Bridge Design Specifications (2010). Also, the ductility of the full scale specimen satisfied the limit in the Specifications (2010). To verify the experimental results, a numerical F.E. analysis was carried and confirmed that the data were similar with results from the test above. The horizontally curved PSC girder fabricated on site was found to have enough strength for safety under and after construction.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.5
• /
• pp.435-443
• /
• 2018

Most of aged water supply pipes have been replaced by the open cut method. However, this method has some limitations because water pipes, in many cases, are buried together with other underground facilities or are buried in the middle of high-traffic roads or in narrow alleyways where boring machines cannot be used. This research developed a pipe bursting device for small diameter pipes that enables pipe replacement without excavating the ground, by the busting of existing buried pipes followed by the traction and insertion of new pipes. As a results of examining the field applicability of the developed device, PE pipes and PVC pipes required the tractive force of 413.65~665.69 kgf and 457.43~791.35 kgf respectively, plus an additional 30 % tractive force per elbow. The proper number of bursting head was demonstrated that the connection of more than 2 heads could secure a stable bending radius of 15D. The developed device can be improved through field experiments involving various pipe types and pipe diameters, as well as presence/absence of elbow, so as to be utilized regardless of diverse variables according to the conditions of the soils surrounding existing pipes.