• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.785-795
• /
• 2018

The International Maritime Organization (IMO) has recognized the risk of hull fouling and announced '2011 Guidelines for the control and management of ship's biofouling to minimize the transfer of invasive aquatic species'and is planning international regulations to enforce them in the future. In this study, to effectively respond to future international regulation, we introduce the case of leading countries related to management of hull fouling and also investigate environmental risk assessment techniques for in-water cleaning. Australia and New Zealand, the leading countries in hull fouling management, have established hull fouling regulations through biological and chemical risk assessment based on in-water cleaning scenarios. Most European countries without their government regulation have been found to perform in-water cleaning in accordance with the IMO's hull fouling regulations. In the Republic of Korea, there is no domestic law for hull fouling organisms, and only approximately 17 species of marine ecological disturbance organisms, are designated and managed under the Marine Ecosystem Law. Since in-water cleaning is accompanied by diffusion of alien species and release of chemical substances into aquatic environments, results from biological as well as chemical risk assessment are performed separately, and then evaluation of in-water cleaning permission is judged by combining these two results. Biological risk assessment created 40 codes of in-water cleaning scenarios, and calculated Risk Priority Number (RPN) scores based on key factors that affect intrusion of alien species during in-water cleaning. Chemical risk assessment was performed using the MAMPEC (Marine Antifoulant Model to Predict Environmental Concentrations), to determine PEC and PNEC values based on copper concentration released during in-water cleaning. Finally, if the PEC/PNEC ratio is >1, it means that chemical risk is high. Based on the assumption that the R/V EARDO ship performs in-water cleaning at Busan's Gamcheon Port, biological risk was estimated to be low due to the RPN value was <10,000, but the PEC/PNEC ratio was higher than 1, it was evaluated as impossible for in-water cleaning. Therefore, it will be necessary for the Republic of Korea to develop the in-water cleaning technology by referring to the case of leading countries and to establish domestic law of ship's hull fouling management, suitable for domestic harbors.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.08a
• /
• pp.70-83
• /
• 2004

The safety diagnosis of cultural assets is Primarily focused on its non-destructiveness. Research on the nondestructive diagnosis and conservation of masonry cultural heritage is the key which is considered by technologic kernel. Geophyscial Prospecting as nondestructive diagnostic technology plays an important role in the characterization of the foundation of stone pagodas. It is natural that understanding of shallow subsurface condition beneath them is essential for their structural safety diagnosis. As an example, the nondestructive geophysical methods were applied to two three-story stone pagodas, Seokgatap (height 10.8 m, width 4.4 m, weight 82.3 ton) and Dabotap (height 10.4 m, width 7.4 m, weight 123.2 ton) which were built in 791 at Bulkuksa temple. An earlier archaeological investigation shows that stone pagodas have experienced severe weathering process and are slightly leaning, which will threaten their stability At the base part of Dabotap, an offset of the stone alignment is also observed. Direct measurements of ultrasonic velocities was introduced for the mechanical properties of the stone The velocity ranges of ultrasonic waves for Dabotap and Seokgatap are 1217${\~}$4403 m/s and 584${\~}$5845 m/s, respectively, and the estimated averages of the uniaxial compressive strength are 463 kg/$cm^2$ and 409 kg/$cm^2$, respectively. Site characteristics, around the pagodas are determined by the measurement of multiple properties such as seismic velocity, resistivity, image of ground-penetrating radar, On the basis of the higher velocity structure, the site of Seokgatap appears to have solider stability than the Seokgatap site. Near the pagodas, higher(up to 2200 $\Omega$m) resistivity is present whereas their outskirts have as low as 200 $\Omega$m. By the combined results of each geophyscial methods, the subsurface boundaries of two stone pagodas are revealed. The Dabotap site is in the form of an octagon having 6-m-long side with the depth of ${\~}$4 m, whereas the Seokgatap site is the 8 ${\times}$ 10 m rectangle with the depth of 3 m. These subsurface structures appear to reflect the original foundations constructed against the stone load of ${\~}8 ton/m^2$. At the subsurface beneath the northeast of each pagoda, low seismic velocity as well as low resistivity is prominent. It is interpreted to represent the weak underground condition which Is the possible cause of the slightly leaning pagodas toward the NNW.

• Journal of Science and Technology Studies
• /
• v.18 no.2
• /
• pp.135-179
• /
• 2018

How do robots interact with the elderly? In this paper, we analyze the contexts of interaction between robots and the elderly and the role of mediators in initiating, facilitating, and maintaining the interaction. We do not attempt to evaluate the robot's performance or measure the impact of robots on the elderly. Instead, we focus on the circumstances and contexts within which a robot is situated as it interacts with the elderly. Our premise is that the success of human-robot interaction does not depend solely on the robot's technical capability, but also on the pre-arranged settings and local contingencies at the site of interaction. We select three television shows that feature robots for the elderly and one "dementia-prevention" robot in a regional healthcare center as our sites for observing robot-elderly interaction: "Grandma's Robot"(tvN), "Co-existence Experiment''(JTBC), "Future Diary"(MBC), and the Silbot class in Suwon. By analyzing verbal and non-verbal interactions between the elderly and the robots in these programs, we point out that in most cases the robots and the elderly do not meet one-to-one; the interaction is usually mediated by an actor who is not an old person. These mediators are not temporary or secondary components in the robot-elderly interaction; they play a key role in the relationship by arranging the first meeting, triggering initial interactions, and carefully observing unfolding interactions. At critical moments, the mediators prevent the interaction from falling apart by intervening verbally or physically. Based on our observation of the robot-elderly interaction, we argue that we can better understand and evaluate the human-robot interaction in general by paying attention to the existence and role of the mediators. We suggest that researchers in human-robot interaction should expand their analytical focus from one-to-one interactions between humans and robots to human-robot-human interactions in diverse real-world situations.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.6
• /
• pp.657-665
• /
• 2019

In this study, we conducted a study on the transcranial magnetic electrode, a method for the study of dementia and muscle pain, a neurodegenerative disease caused by an aging society, which is becoming a problem worldwide. In particular, transcranial magnetic electrodes have been studied to improve their ability to be deteriorated by dementia symptoms such as speech, cognitive ability, and memory by outputting magnetism deep into the brain using coils on the head epidermis. In this study, simulation was performed using Maxwell 3D program for the design of coil, the core of transcranial magnetic electrode. As a result of the simulation comparison between the coil designed by the previous research and the coil through the research and development, the output was found to be superior to the conventional designed coil. The graphs of the coil outputs of B-Field and H-Field are found to be symmetrical, but the symmetry between each coil is pseudo-symmetrical and not accurate. Based on these results, an experiment was conducted to confirm whether the output of the head epidermis through both coils is possible. In the magnitude field of the reverse-coil 2-coil analysis, the maximum output was 3.3920e + 004 H [A_per_meter], and the vector field showed the strongest magnetic field around 35 to 165 degrees. It was confirmed that the magnetic output canceled due to the magnetic output. In the case of the forward 2-coil, a maximum of 3.2348e + 004H [A_per_meter] similar to the reverse coil was observed, but in the case of the vector field, the magnetic output regarding the forward output and the head skin output was confirmed. However, when the height change in the output coil, the magnetic output was reduced.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.515-522
• /
• 2007

In this study we have attempted to evaluate the technical feasibility of "BB-HY", which is depleted gas reservoir as a gas storage field, using the commercial compositional simulator "ECLIPSE 300". The "BB-HY" reservoir has an initial gas in place of 143 BCF which is relatively small, and its porosity and permeability are 19.5% and 50 md, respectively. For "BB-HY" gas reservoir, we have performed a feasibility analysis by investigating the cushion gas (or working gas), converting time to gas storage field, operation cycle, number of wells and the possible application of horizontal borehole as well. From the simulation results, it was found that the amount of cushion gas in "BB-HY" reservoir is required at least 50% of IGIP in order to operate stably as gas storage field. When one produces gas for longer time and hence the remaining gas in reservoir is less than optimal cushion gas, no technical problem was occurred as long as additional cushion gas is injected up to the optimal cushion gas. In the case of changing the operation cycle into producing gas for three months during winter season from producing five months, the result shows that either the cushion gas should be greater than 60% or the more number of wells should be drilled. Meanwhile, from the results of sensitivity analysis for the number of wells, in cases of operating six or eight vertical wells, the stable reproduction of the injected gas can not be possible in "BB-HY" gas reservoir since the remaining gas in reservoir is increased. Therefore, in "BB-HY" reservoir, at least ten vertical wells should be drilled for the stable operation of gas. This time, when three horizontal wells are additionally drilled including the existing two vertical wells, it was found that the operation of injection and reproduction of gas is relatively stable in "BB-HY" gas reservoir.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.1
• /
• pp.17-27
• /
• 2020

The purpose of this study is to confirm the effects of a 6-week high-intensity combined training program on canoe athletes' cardiorespiratory function, isokinetic trunk strength, and anaerobic power. For the purpose of this study, the high-intensity combined training program was applied to 9 high-school canoe athletes. The high-intensity combined training program consists of aerobic exercise performed 2 times a week (Tuesday and Thursday), anaerobic exercise performed 3 times a week (Monday, Wednesday, and Friday), and flexibility exercise performed 5 times a week. The core of the high-intensity combined training program was the anaerobic training program performed with 100% weight for repetition; otherwise, the existing training method was divided into the percentage (%) of the 1RM. The aerobic exercise and the gym ball exercise are performed subsidiarily. Results showed that there was a statistically significant difference in height and muscle mass, whereas there was no statistically significant difference in weight, body fat percentage, and BMI followed by the high-intensity combined training program. There were statistically significant differences in maximum oxygen uptake and total exercise time. The angular velocity of 30°/sec showed a statistically significant difference in the peak torque item of flexors only. Also, the angular velocity of 120°/sec showed a statistically significant difference in the total work item of extensors only; however, there was no statistically significant difference in all the items of peak power, average power, and peak drop. In conclusion, it seems that the high-intensity combined training program may be applied as a training program for enhancing canoe athletes' performance. For further studies, more than 6 weeks training program with more participants would show improved results of isokinetic strength and anaerobic power in athlets.

• Cartoon and Animation Studies
• /
• s.35
• /
• pp.107-128
• /
• 2014

Cultural Content industries based on imagination and creativity are attracting attention and the animation high value-added industry is still spotlighted. Among them, Disney Studios make money through using their professional skills. There are the know-how has developed for a long time, and there are timeless strategy. This study is analyzing by fantasy elements for knowing the messages of Disney animation. Fantasy defined as genre of literature by Todorov and Jackson emphasized its social role and significance. Hume expanded the area of fantasy and Tolkein Jahoriski and Boyer classified the fantasy according to the purpose. Through the analyzing Disney animation , Disney's fantasy show the specific expression depending on the target. Disney is based on the three types of fantasy depending on the growth of the journey. The first area is composed of the main character's growth and satisfy the desire and escapism, The second is the word of antagonist who opposed to reality and break the rules of the dominant ideology. The last area is the utopia provided after hero beat the antagonist. Disney characters give the messages by using the fantasy like the transformation or alter ego. That show the subject of the main character's growth and the supporting characters as the expression of the multiple personality of main. These emphasize the hero's growth and give the fun. Also, in the subject of the otherness, the hero always destroy the evil who broke the rules of reality. In this way, the fantasy offered by Disney give the messages of sacrifice and family from true love. Disney has the support of their target audiences continue to be able to convey ideology.

• Economic and Environmental Geology
• /
• v.46 no.6
• /
• pp.485-494
• /
• 2013

$CO_2$ Monitoring, Mitigation and Verification (MMV) is the essential part in the Carbon Capture and Storage (CCS) project in order to assure the storage permanence economically and environmentally. In large-scale CCS projects in the world, the seismic time-lapse survey is a key technology for monitoring the behavior of injected $CO_2$. In this study, we developed a basic process procedure for 3-D seismic baseline data from the Aquistore project, Estevan, Canada. Major target formations of Aquistore CCS project are the Winnipeg and the Deadwood sandstone formations located between 1,800 and 1,900 ms in traveltime. The analysis of trace energy and similarity attributes of seismic data followed by spectral decomposition are carried out for the characterization of $CO_2$ injection zone. High trace energies are concentrated in the northern part of the survey area at 1,800 ms and in the southern part at 1,850 ms in traveltime. The sandstone dominant regions are well recognized with high reflectivity by the trace energy analysis. Similarity attributes show two structural discontinuities trending the NW-SE direction at the target depth. Spectral decomposition of 5, 20 and 40 Hz frequency contents discriminated the successive E-W depositional events at the center of the research area. Additional noise rejection and stratigraphic interpretation on the baseline data followed by applying appropriate imaging technique will be helpful to investigate the differences between baseline data and multi-vintage monitor data.

• Journal of the Korean Chemical Society
• /
• v.59 no.2
• /
• pp.164-178
• /
• 2015

The purpose of this study was to design a teaching and learning method conductive to the development of creative thinking skills and investigate its effects. It has been developed integrated mind map with feature of visualizing the divergent thinking to the aspects of Science (S), Technology (T) & Engineering (E), Arts (A), Mathematics (M). Integrated mind map can be divided into four types of STEAM type, STEA type, STEM type, STE type depending on the category of key words in the first branch. And Integrated mind map can be divided into three levels of guided, intermediate, open depending on the teacher's guide degree. And also integrated mind map activities were carried out in the form of group, class share as well as individual. This study was implemented during a semester and students in experiment group experienced individual-integrated mind map activity 10 times, group-integrated mind map activity 10 times, class share-integrated mind map activity 3 times. The results indicated that the experimental group presented statistically meaningful improvement in creative thinking skills (p<.05). And there was a statistically meaningful improvement in fluency, flexibility, originality as a sub-category of creative thinking skills(p <.05). Also creative thinking skills are not affected by the level of cognitive, academic performance, gender (p<.05). In conclusion, it was found that 'integrated mind map activity' improved student's creative thinking skills. There was no interaction effect about creative thinking skills between the teaching strategy and cognitive level, achivement, gender of those students.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.1
• /
• pp.73-103
• /
• 2008

Over the past few years, "business models" has surged into the management vocabulary. But, while it has become quite fashionable to discuss business models, there has been still much confusion about what are business models and how they could make. In fact, business models can serve a positive and powerful role in corporate management. While other authors have recently offered definitions of "business model", none of them appears to be generally accepted. This paper presents the absence of the generally definition of the business models, elements of business model and classify business logic. To help start-up entrepreneurs better understand, found and check business models thus, this paper propose a method of business model, understanding, founding and checking. The dissertation will present an effective business model building method which is necessary for the start-up entrepreneurs to start business. This paper consists of three parts. first is showing the previous study of business model. The second is the re-definition business model and elements based on the first and to present a new method of business model plating and checking for start-up IT (information technology) company's entrepreneurs. The last is application of the methode. This study applied the methode to a company which is located in "DAEDEOK INNOPOLIS"; this company has specialized Information technology.