• Journal of Science and Technology Studies
• /
• v.19 no.3
• /
• pp.167-200
• /
• 2019

In recent years, the material has mattered to the humanities and social sciences in the West and feminism is no exception. It is a notable change that feminist analyses, which had previously shown critiques against science and technology, attempted to build new engagements with matter. STS (science and technology studies) has also accumulated scholarships and developed conceptual tools on the thing or the existence itself through "the ontological turn." The objective of this paper is not to introduce new materialism or new material feminism in full, but to reveal the possibility and potential of doing science, technology and women studies by selectively relying on the achievement of new materialism feminism. This article shows a way to study women's practice of science and technology by analyzing the case of plastic surgery practices through the ontological concepts of STS, particularly those of Annemarie Mol, Karen Barad, and Charis Thompson, and proposes a new engagement among new materialism, feminism, and STS. This article is organized as follows. First of all, after briefly discussing main issues in new material feminism, I will show the limitations of previous feminist studies of plastic surgery under the light of new material feminism. The rest of the article introduces the conceptual tools of ontological STS, describes plastic surgery practices with those tools, and finally provides their feminist implications.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.295-301
• /
• 2018

To obtain denture retention, support, and stability in Class III edentulous cases with flat alveolar ridges and extensive flabby tissue is very difficult. The patient was a 72-year-old male who wore ill-fitting 20 year old dentures made by non-medical institutions. There was flabby tissue on the maxillary anterior ridge. The patient showed Angle Class III skeletal relationship with severe protruded mandible. First, temporary dentures were fabricated to restore the masticatory function, and final dentures were made through non- pressure impression technique and careful the arrangement of the posterior resin teeth. Improvement of the retention and stability of the denture during the occlusal force application is reported.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.384-388
• /
• 1999

We have used high pH anion-exchange chromatography to analyze low level (below $20{\mu}M$) $\alpha$-D-glucose-1-phosphate (G-1-P) that can be used as a cytostatic compound, an antibiotic, and immunosuppressive drug. Our chromatographic method afforded excellent peak resolution and seletivity for glucose-6-phosphate and various maltooligosaccharides as well as G-1-P. The pulsed amperometric detector yielded linear response on G-1-P ranging from 2 - $20{\mu}M$, giving slope of $4.8{\times}10^4$(peak area/${\mu}M$). The detection limit was $2{\mu}M$. This method was applied to the purification of thermophilic $\alpha$-glucan phosphorylase from Thermus caldophilus. The technique will be extremely useful in future studies concerning carbohydrate metabolism in living organisms.

• Microbiology and Biotechnology Letters
• /
• v.31 no.1
• /
• pp.57-62
• /
• 2003

A bacteria strain producing extracellular $\beta$-mannanase was isolated from soil and was identified as Bacillus subtilis by 16S rRNA sequence comparison and biochemical determinations. The optimum pH and temperature for the $\beta$-mannanase activity were 5.0 and 5.5$^{\circ}C$, respectively. The zymogram technique revealed a single protein band exhibiting $\beta$-mannanase activity from the culture supernatant. The molecular mass of the enzyme was estimated at approximately 130 kDa. The addition of 0.5% lactose or 0.5% locust bean gum to the LB medium caused to Increase significantly the $\beta$-mannanase productivity from Bacillus subtilis JS-1. The cells grown on LB medium supplemented with lactose produced maximal enzyme activity at the stationary phase. In contrast to this, the $\beta$-mannanase was induced at the logarithmic phase from the cells grown on LB medium supplemented with locust bean gum. The discrepancy in induction times suggests that $\beta$-mannanase was induced by different induction mechanisms depending on the carbon sources in Bacillus subtilis JS-1 .

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.414-414
• /
• 2017

토양수분은 지면환경에서 일어나는 수문 및 에너지 순환을 이해하는 데 있어 중요한 기상인자이다. 토양수분 현장관측은 땅속에 매설된 센서에 의해 상당히 정확하게 이루어지만, 관측점 수가 충분치 않아 공간적 연속성을 확보하지 못하는 어려움이 존재한다. 이에 광역적 및 연속적 관측이 가능한 마이크로파 위성센서가 토양수분 정보 획득을 위한 보조수단으로서 그 중요성이 부각되고 있다. 마이크로파 위성센서는 구름 등 기상조건의 제약을 받지 않으며, 1978년 이래 현재까지 여러 위성에 의해 25 km 및 10 km 해상도의 전지구 토양수분자료가 생산되어 왔다. 마이크로파 센서를 이용한 토양수분자료는 동일지점에 대하여 하루 2회 정도 산출되므로 적절한 시간분해능을 가지지만, 공간해상도가 최고 10 km로서 지역규모의 수문분석에 적용하기에는 충분치 않다. 이러한 토양수분자료의 공간해상도 문제 해결을 위하여 다양한 지면환경요소를 활용한 통계적 다운스케일링이 대안으로 제시되었다. 최근의 선행연구들은 대부분 방정식을 이용한 결합모형을 통해 통계적 다운스케일링을 수행하였는데, 회귀식과 같은 선형결합뿐 아니라 신경망이나 기계학습 등의 비선형결합에서도, 불가피하게 발생할 수밖에 없는 잔차(residual)로 인하여 다운스케일링 전후의 공간분포 패턴이 달라져버리는 문제를 안고 있었다. 회귀분석에 잔차의 공간내삽을 결합시킨 회귀크리깅(regression kriging)은 잔차보정을 통해 이러한 문제를 해결함으로써 다운스케일링 전후의 공간분포 일관성을 보장하는 기법이다. 이 연구에서는 회귀크리깅을 이용하여 일자별 AMSR2(Advanced Microwave Scanning Radiometer 2) 토양수분 자료를 10 km에서 1 km 해상도로 다운스케일링하고, 다운스케일링 전후의 자료패턴 일관성을 평가한다. 지면온도(LST), 지면온도상승률(RR), 식생온도건조지수(TVDI)는 일자별로 DB를 구축하였고, 식생지수(NDVI), 수분지수(NDWI), 지면알베도(SA)는 8일 간격으로 DB를 구축하였다. 이러한 8일 간격의 자료를 일자별로 변환하기 위하여 큐빅스플라인(cubic spline)을 이용하여 시계열내삽을 수행하였다. 또한 상이한 공간해상도의 자료는 최근린법을 이용하여 다운스케일링 목표해상도인 1 km에 맞도록 변환하였다. 우선 저해상도 스케일에서 추정치를 산출하기 위해서는 저해상도 픽셀별로 이에 해당하는 복수의 고해상도 픽셀을 평균화하여 대응시켜야 하며, 이를 통해 6개의 설명변수(LST, RR, TVDI, NDVI, NDWI, SA)와 AMSR2 토양수분을 반응변수로 하는 다중회귀식을 도출하였다. 이식을 고해상도 스케일의 설명변수들에 적용하면 고해상도 토양수분 추정치가 산출되는데, 이때 추정치와 원자료의 차이에 해당하는 잔차에 대한 보정이 필요하다. 저해상도 스케일로 존재하는 잔차를 크리깅 공간내삽을 통해 고해상도로 변환한 후 이를 고해상도 추정치에 부가해주는 방식으로 잔차보정이 이루어짐으로써, 다운스케일링 전후의 자료패턴 일관성이 유지되는(r>0.95) 공간상세화된 토양수분 자료를 생산할 수 있다.

• Annual Conference of KIPS
• /
• 2009.11a
• /
• pp.743-744
• /
• 2009

사용자가 방문한 웹 사이트와 연관된 광고를 웹 페이지에 실어주는 문맥광고 관련 연구가 광고 효율성 측면에서 최근 주목을 받고 있다. 이러한 문맥광고 관련 연구의 핵심은 웹 페이지와 웹 광고간의 연관성을 높여주는데 있는데, 연관성 향상 방안으로 최근 사용자 의도 분석을 통한 연관성 향상 기법이 많이 연구되고 있다. 그러나 기존 연구에서는 사용자가 로그인을 해야 하거나, 로그 정보를 일정기간이상 수집해야만 사용자 의도 분석이 가능 하다는 문제점이 존재 한다. 본 논문에서는 로그인이나 많은 양의 로그정보 수집 없이 한 세션 내에서 방문한 웹 페이지 로그만을 이용하여 개인화된 문맥 광고를 제공하는 문맥광고 기법을 제안한다. 실험 결과에서는 제안하는 기법이 기존의 광고 기법에 비해 사용자가 판단하는 웹 페이지와 웹 광고의 연관성 (precison) 이 기존의 기법에 비해 높아짐을 증명한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.304-315
• /
• 2018

Harmony Search (HS) is a recently developed metaheuristic algorithm that is widely known to many researchers. However, due to the increasing complexity of optimization problems, the optimal solution cannot be efficiently found by HS. To overcome this problem, there have been many studies that have improved the performance of HS by modifying the parameter settings and incorporating other metaheuristic algorithms. In this study, Copycat HS (CcHS) is suggested, which improves the parameter setting method and the performance of searching for the optimal solution. To verify the performance of CcHS, the results were compared to those of HS variants with a set of well-known mathematical benchmark problems. The effectiveness of CcHS was proven by finding final solutions that are closer to the global optimum than other algorithms in all problems. To analyze the applicability of CcHS to engineering optimization problems, it was applied to a design problem for Water Distribution Systems (WDS), which is widely applied in previous research. As a result, CcHS proposed the minimum design cost, which was 21.91% cheaper than the cost suggested by simple HS.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.621-629
• /
• 1992

This study is concerned with an application of the Boundary Element Method to 2-dimensional elastoplastic stress analysis on the material nonlinearities. The boundary integral formulation adopted an initial stress equation in the inelastic term. In order to determine the initial stress increment, the increment of initial elastic strain energy due to elastic increment in stressstrain curve was used as the convergence criterion during iterative process. For the validity of this procedure, the results of B.E.M. with constant elements and NISA with linear elements where compared on the thin plate with 2 edge v-notches under static tension and the thick cylinder under internal pressure. And this paper compared the results of using unmedical integral with the results of using semi-analytical integral on the plastic domain integral.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.351-356
• /
• 2022

Among the path planning methods used to generate the ship's path, the graph search-based method is widely used because it has the advantage of its completeness, optimality. In order to apply the graph-based search method to the berthing path plan, the deviation from the path must be minimized. Path following suitability should be considered essential, since path deviation during berthing can lead to collisions with berthing facilities. However, existing studies of graph search-based berthing path planning are dangerous for application to real-world navigation environments because they produce results with a course change just before berthing. Therefore, in this paper, we develop a cost function suitable for path following, and propose a 3D A* algorithm that applies it. In addition, in order to evaluate the suitability for the actual operating environment, the results of the path generation of the algorithm are compared with the trajectory of the data collected by manned operations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.629-635
• /
• 2010

An SGBEM (symmetric Galerkin boundary element method)-FEM alternating method has been proposed by Nikishkov, Park and Atluri. This method can be used to obtain mixed-mode stress intensity factors for planar and nonplanar three-dimensional cracks having an arbitrary shape. For field applications, however, it is necessary to verify the accuracy and consistency of this method. Therefore, in this study, we investigate the effects of several factors on the accuracy of the stress intensity factors obtained using the abovementioned alternating method. The obtained stress intensity factors are compared with the known values provided in handbooks, especially in the case of internal and external circumferential semi-elliptical surface cracks. The results show that the SGBEM-FEM alternating method yields accurate stress intensity factors for three-dimensional cracks, including internal and external circumferential surface cracks and that the method can be used as a robust crack analysis tool for solving field problems.