• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.6
• /
• pp.298-305
• /
• 2018

In this study, we investigated the tensile bond characteristics of underwater coating materials, in order to obtain useful information in support of repair work for marine and coastal concrete structures. Test variables included type of underwater coating, surface conditions of the concrete substrate, and environmental conditions. Pull-off tensile bond strength was measured at 24 h after applying underwater coatings to concrete substrates, in compliance with the procedures specified in ASTM C1583. Failure modes (coating, interface, and parent concrete) for each coating were identified through visual inspection, and comparisons were made based on measured bond strength. The tensile bond strength decreased underwater compared to that under dry conditions, while no significant effect of surface roughness on the measured bond strength was observed in underwater tests. Key aspects that need to be considered regarding selection and use of underwater coating materials for marine and coastal concrete structures were discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.142-146
• /
• 2016

최근 저해상도 기상자료를 바탕으로 한 단기간에 내린 폭우나 극심한 가뭄 등과 같은 국지적인 기상 예보는 한계가 있기 때문에 고해상도 기상자료에 대한 수요가 증대되고 있으며, 특히 지형이 복잡한 한반도의 경우 지형적인 영향을 고려한 고해상도 기상자료가 요구되고 있다. 하지만 현재 기상청에서 제공하는 남한 지역의 지상 관측 자료는 약 10km의 불규칙한 간격으로 분포하고 있으며 이는 복잡한 남한지역의 지형 특성을 고려하기에는 해상도가 낮아 상세한 기상 현상을 예측하기 힘들다. 또한, 북한의 경우 사용가능한 관측 자료가 부족하여 한반도 전체를 대상으로 한 기상 예보 및 기후 특성 분석에는 한계가 있다. 따라서 본 연구에서는 정량적 강수 예측 모형인 QPM(Quantitative Precipitation Model)을 이용하여 3시간 간격의 현재기후(2000-2014년)에 대한 한반도 지역의 1km 강우 자료를 복원하였다. 관측 자료가 부족한 북한의 경우 재분석 자료를 이용하여 1km 해상도의 강우 자료를 복원하였다. 이를 위해 몇 가지 특정한 강우 Case를 선별하였고, QPM 수행 시 필요한 강수, 상대습도, 지위고도, 연직 기온, 연직 바람장 등의 변수에 대하여 남한 지역에 해당하는 지점의 여러 재분석 자료와 실제 남한 지역의 지상/고층 관측 자료와의 비교 및 Correlation 분석을 통해 가장 적절하다고 판단되는 재분석 자료인 NASA에서 제공하는 MERRA Reanalysis data를 선정하였다. 또한, 소규모 지형효과를 고려하기 위한 상세 지형자료로 고해상도 지형 자료인 DEM(*Digital Elevation Model) 1km 자료를 사용하였다. 한반도의 강우를 복원하기 위하여 Barnes 기법을 이용하여 불규칙적으로 분포해 있는 강수량 데이터를 규칙적인 자료로 격자화 하였고, 격자화 한 10km 해상도의 자료를 QPM을 통해 복잡한 지형 특성을 고려한 1km 해상도의 강우 자료로 복원하였다. 또한, QPM의 모의 성능을 검증하기 위하여, 위에서 선별한 특정 강우 Case에 대하여 복원한 1km 강우자료와 200m 이내의 거리에서 겹치는 지상관측자료와의 비교를 통하여 모의 성능을 검증하였다. 본 연구를 통해 복원된 한반도 상세 강우 자료를 통해 통일을 대비한 기상, 농 수산업, 수자원 등 다양한 분야에서 활용 될 수 있으며, 국지적인 폭우 및 가뭄 등의 이상 기상 현상을 분석하는 데 참고 기초 자료로써 활용 될 수 있을 것으로 기대된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.82-92
• /
• 2022

This study aims to investigate the effect of total electrochemical cell resistance (TECR) on electrochemical impedance (EI) measurements of reinforced concrete (RC) by electrochemical impedance spectroscopy (EIS) using a three-electrode system. A series of experimental study is performed to measure electrochemical behavior of a steel bar embedded in a concrete cube specimen, with a side length of 200 mm, in various experimental conditions. Main variables include concrete dry conditions, coupling resistance between sensing electrodes and concrete surface, and area of the counter electrode. It is demonstrated that EI values remains stable when the compliant voltage of a measuring device is sufficiently great compared to the potential drop caused by TECR of concrete specimens. It is confirmed that the effect of the coupling resistance of TECR is far more influential than other two factors (concrete dry conditions and area of the counter electrode). The results in this study can be used as a fundamental basis for development of a surface-mount sensor for corrosion monitoring of reinforced concrete structures exposed to wet-and-dry cycles under marine environment.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.353-360
• /
• 2015

The offshore oil production requires a huge amount of cost and time accompanied by multiple variables due to the peculiar nature of 'offshore'. And every process concerned is controlled by elaborate series of plans for reducing loss of lives, environment and property. This paper treats an optimization problem for offshore oil production and transportation. We present an offshore production and transportation network to define scope of the problem and construct a mixed integer linear programming model to tackle it. To demonstrate the validity of the optimization model presented, some computational experiments based on hypothetical offshore oil fields and demand markets are carried out by using MS Office Excel solver. The downstream of the offshore production and transportation network ends up with the maritime transportation problem distributing the crude oil produced from offshore fields to demand markets. We used MoDiSS(Model-based DSS in Ship Scheduling) which was built to resolve this maritime transportation problem. The paper concludes with the remark that the results of the study might be meaningfully applicable to the real world problems of offshore oil production and transportation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1038-1043
• /
• 2021

Guaranteed seafarer wage payment is essential to ensure a stable supply of seafarers. However, disputes over non-payment of wages to seafarers often occur. In this study, an automatic wage payment system was designed using a blockchain-based smart contract to resolve the problem of seafarers' wage arrears. The designed system consists of an information register, a matching processing unit, a review rating management unit, and wage remittance before deploying smart contracts. The matching process was designed to send an automatic notification to seafarers and shipowners if the sum of the weight of the four variables, namely wages, ship type/fishery, position, and license, exceeded a pre-defined threshold. In addition, a review rating management system, based on a combination of mean and median, was presented to serve as a medium to mutually fulfill the normal working conditions. The smart contract automatically fulfills the labor contract between the parties without an intermediary. This system will naturally resolve problems such as fraudulent advance payment to seafarers, embezzlement by unregistered employment agencies, overdue wages, and forgery of seafarers' books. If this system design is commercialized and institutionally activated, it is expected that stable wages will be guaranteed to seafarers, and in turn, the difficulties in human resources supply will be solved. We plan to test it in a local environment for further developing this system.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.3
• /
• pp.217-226
• /
• 2009

Marine geological storage of $CO_2$ is regarded as one of the most promising options to response climate change. Marine geological storage of $CO_2$ is to capture $CO_2$ from major point sources, to transport to the storage sites and to store $CO_2$ into the marine geological structure such as deep sea saline aquifer. Up to now, process design for this $CO_2$ marine geological storage has been carried out mainly on pure $CO_2$. Unfortunately the captured $CO_2$ mixture contains many impurities such as $N_2$, $O_2$, Ar, $H_2O$, $SO_x$, $H_2S$. A small amount of impurities can change the thermodynamic properties and then significantly affect the compression, purification and transport processes. In order to design a reliable $CO_2$ marine geological storage system, it is necessary to perform numerical process simulation using thermodynamic equation of state. The purpose of the present paper is to compare and analyse the relevant equations of state including PR, PRBM, RKS and SRK equation of state for $CO_2-N_2$ mixture. To evaluate the predictive accuracy of the equation of the state, we compared numerical calculation results with reference experimental data. In addition, optimum binary parameter to consider the interaction of $CO_2$ and $N_2$ molecules was suggested based on the mean absolute percent error. In conclusion, we suggest the most reliable equation of state and relevant binary parameter in designing the $CO_2-N_2$ mixture marine geological storage process.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.238-246
• /
• 2012

Once oil is spilled into marine environment, it experiences various weathering processes among which evaporation is the most dominant process in the initial stage of weathering. This study aimed to elucidate the effects of evaporation on the physicochemical properties of spilled oil using standardized laboratory experiments. Laboratory evaporation process was successfully reproduced using controlled rotary evaporation method. In case of Iranian Heavy crude (IHC), evaporation rate after 48 hours was $29.3{\pm}0.4%$ (n=40, p<0.001). Evaporation was simulated using ADIOS2 weathering model and the result was in agreement with laboratory experiment. Chemical composition changes of petroleum hydrocarbons including alkanes, polycyclic aromatic hydrocarbons (PAHs) and biomarkers by evaporation rate were also analyzed. As oil evaporated, low molecular weight alkanes and PAHs decreased, while biomakers showed conservative characteristics. Among biomarkers, $17{\alpha}(H)$, $21{\beta}(H)$-hopane was used for calculation of weathering rates, which matched with evaporative mass losses. Weathering rate calculation using hopane showed that stranded oils of weathering stage I (28.9%) and mesocosm oil weathering experiment till 5 days (26.5%) were mainly affected by evaporation process.

• Journal of the Korean earth science society
• /
• v.40 no.3
• /
• pp.212-226
• /
• 2019

This study derived spectral Lambertian Equivalent Reflectance (LER) over East Asia from the observations of Ozone Monitoring Instrument (OMI) onboard polar-orbit satellite Aura. The climatological (October 2004-September 2007) LER values were compared with the surface reflectance products of OMI or MODerate resolution Imaging Spectroradiometer (MODIS) in terms of the atmosphere-environment variables as follows: wavelength (UV, visible), surface properties (land, ocean), and cloud filtering. Four kinds of LER outputs in the UV and visible region (328-500 nm) were retrieved based on the averages of lowest (1, 5, and 10%) surface reflectance values as well as the minimum reflectance. The average of the lowest 10% among them was in best agreement with the OMI product: correlation coefficient (0.88), RMSE (1.0%) and mean bias (-0.3%). The 10% average and OMI LER values over ocean were 2% larger in UV than in visible, while the values over land were 1% smaller. The LER variability on the wavelength and surface property was highest (~3%) in the condition of both land and visible, particularly in the ice-cap and desert regions. The minimum reflectance values over the oceanic and inland sample areas overestimated the MODIS product by 1.4%. This high-resolution MODIS observations were effective in removing cloud contamination. The relative errors of the 10% average to MODIS were smaller (-0.6%) over ocean but larger (1.5%) over land than those of the OMI product to MODIS. The reduced relative error in the OMI product over land may result from additional cloud filtering using the Landsat data. This study will be useful when retrieveing the surface reflectance from geostationary-orbit environmental satellite (e.g., Geostationary Environment Monitoring Spectrometer; GEMS).

• Korean Journal of Remote Sensing
• /
• v.38 no.5_2
• /
• pp.747-763
• /
• 2022

Ocean salinity affects ocean circulation on a global scale and low salinity water around coastal areas often has an impact on aquaculture and fisheries. Microwave satellite sensors (e.g., Soil Moisture Active Passive [SMAP]) have provided sea surface salinity (SSS) based on the dielectric characteristics of water associated with SSS and sea surface temperature (SST). In this study, a Light Gradient Boosting Machine (LGBM)-based model for generating high resolution SSS from Geostationary Ocean Color Imager (GOCI) data was proposed, having machine learning-based improved SMAP SSS by Jang et al. (2022) as reference data (SMAP SSS (Jang)). Three schemes with different input variables were tested, and scheme 3 with all variables including Multi-scale Ultra-high Resolution SST yielded the best performance (coefficient of determination = 0.60, root mean square error = 0.91 psu). The proposed LGBM-based GOCI SSS had a similar spatiotemporal pattern with SMAP SSS (Jang), with much higher spatial resolution even in coastal areas, where SMAP SSS (Jang) was not available. In addition, when tested for the great flood occurred in Southern China in August 2020, GOCI SSS well simulated the spatial and temporal change of Changjiang Diluted Water. This research provided a potential that optical satellite data can be used to generate high resolution SSS associated with the improved microwave-based SSS especially in coastal areas.

• Journal of agricultural medicine and community health
• /
• v.45 no.4
• /
• pp.208-220
• /
• 2020

Objectives: The purpose of this study was to identify factors influencing the posttraumatic growth of maritime police officers. Methods: The subjects include 293 maritime police officers that received basic and professional education at the Korea Coast Guard Academy on June 17~July 31, 2019. Data was analyzed in frequency, percentage, mean, standard deviation, t-test, variance analysis, Pearson's correlation analysis, and multiple regression analysis with the SPSS Version 21.0 program. Results: The findings show that the maritime police officers scored mean 39.72±16.56 points in posttraumatic growth. marital status(β=.194, p=.002), smoking(β=.152, p=.010), regular exercise(β=-.185, p<.001), total duration of service(β=-.154, p=.033), resilience(β=.310, p<.001), social support (β=.250, p<.001), and collective culture(β=.158, p=.004) had impacts on their posttraumatic growth. Conclusion: The findings of the study demonstrate that the posttraumatic growth of maritime police officers was under the influence of supports from families and peers, working environment, and culture as well as their individual characteristics.