• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.98-99
• /
• 2022

해양 산업은 e-Navigation 시스템을 시작으로 체계적인 접근 방식과 다양한 전략을 바탕으로 다양한 해양 서비스를 제공하고 있으며, 서비스 운영에 필수적인 장비 개발 및 스마트 항로표지 서버 구축 등 통합 운영이 가능한 스마트 항만 구축을 목표로 나아가고 있다. 그러나 고도로 자동화된 스마트 항만의 자율 시스템을 검증하기 위한 테스트베드는 기존의 테스트베드와 달리 복잡한 접근 방식과 다양한 요소가 필요하며, 특히 인공지능 등 최첨단 디지털 기술이 적용할 수 있게 됨에 따라 신규 서비스 제공과 이에 따른 잠재적으로 발생이 가능한 치명적인 문제점을 조기에 발견하고 대응하기 위하여 사이버보안체계 연구 및 이를 검증할 테스트베드 구축에 대한 준비가 필요한 시점이다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.193-194
• /
• 2021

실습선 한나라호는 4차 산업혁명에 부응하는 첨단장비와 안전한 시설을 갖추고 있으며, 자동위치제어시스템(DPS)를 적용하여 해양플랜트 교육이 가능한 9,196톤으로 아시아 최대 실습선이다. 또한, 특수목적선 코드를 적용해 감항성능 및 안전성이 매우 우수하다. 본 연구에서는 실습선의 안전한 접이안과 항내조선을 위해 VDR과 CCT 자료를 이용한 모니터링을 통해 매우 협소한 영역내에서 전개되는 동적 거동정보의 정량적 수집, 평가, 분석을 통해 안전통항의 저해요인을 식별하고 이를 제거 및 방지하기 위한 방법에 대해 제안하고자 한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.1
• /
• pp.43-50
• /
• 2021

A Leg Mating Unit (LMU) is a device utilized during the float-over installation of offshore structures that include hyperelastic pads and mating part. The hyperelastic pads absorb the loads, whereas the mating part works as guidance between topside and supporting structures during the mating sequence of float-over installation. In this study, the design optimization of an LMU for the float-over installation of floating-type offshore structures is conducted to enhance the performance and to satisfy the requirements defined by classification society regulations. The initial dimensions of the LMU are referred to the dimensions of those used in fixed-type float-over installation because only the location and the number of LMUs are known. The two-parameter Mooney-Rivlin model is adopted to describe the hyperelastic pads under given material parameters. Geometric variables, such as the thickness, height, and width of members, as well as configuration variables, such as the angle and number of members, are defined as design variables and are parameterized. A sampling-based design sensitivity analysis based on latin hypercube sampling method is performed to filter the important design variables. The design optimization problem is formulated to minimize the total mass of the LMU under maximum von Mises stress and reaction force constraints.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.632-637
• /
• 2019

The cable tray design of an offshore plant production design is to optimally arrange the 3D modeling so that the cable can be installed without interfering with the structural members and various outfit equipment, and it is performed using a PDMS (Plant design management system), which is a 3D CAD system for an offshore plant layout. This study reviewed the development of PML (Programmable macro language) for a PDMS supporting offshore plant cable tray design and examined the efficiency compared to the existing method. Cable tray design PML developed in this paper enables fully parametric design using electrical outfit template library, allowing a rapid response to frequent modifications due to design changes and minimizing repetitive work fatigue by reflecting the accumulated design experience. In addition, the developed system was applied to the offshore plant structure module and it improved the work efficiency by more than 50% compared to the existing method.

• Journal of the Korean Institute of Plant Engineering
• /
• v.23 no.4
• /
• pp.77-83
• /
• 2018

Nowadays, as IT industry is being developed, many studies are in progress in the areas of user interface (UI) and user experience (UX) and interest in the icons related to these areas are rising accordingly. IT developments have also influenced the vessel sector promoting the development of navigation equipment and systems utilizing IT. However, due to complicated functions of navigation equipment and systems, concerns have been noted about the increased cognitive burden on officers, along with the need for researches on reducing such burden. This study, therefore, was conducted focusing on the design of icons that will reduce cognitive burden on officers when using a typical navigation equipment such as ECDIS(Electric Chart Display and Information System). Based on a survey conducted with experts who have rich experiences in navigation and are currently teaching ECDIS in universities, the present study identified the functions of ECDIS, for which icons should be designed. Accordingly, suitable icons for ECDIS were designed and their effects were evaluated. It is expected that the results of this study will be used as basic data for the design of icons for other navigation equipment in the future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.123-124
• /
• 2019

우리나라 조선업은 건조분야에서 세계최고의 위상을 자랑하면서 급속도로 발전을 해왔다. 그러나 세계적으로 수주 불황과 조선 산업의 침체로 인해서 조선 산업은 직접적인 타격으로 국내의 중견 조선소 및 기자재 공급업체들이 도산되어0 최근부터 해양플랜트 사업이 우리나라 새로운 산업으로 부상하면서 해양 ICT 융합기술을 활용한 기자재 업체들이 많이 생겨났다. 하지만 실제 해양플랜트 선박 및 기자재의 국산화율은 현저히 낮다. 해양플랜트 외에 다른 용도로 사용이 가능한 Service and Access Basket의 국산화를 위해서 각 모듈별로 임베디드를 연계하여 설계하였다. 기존의 Service and Access Basket의 미비했던 안전 사양(기울기, 하중, 경보 등)을 추가로 설계하고 신뢰성이 높은 센서(자이로, 하중센서, 초음파 거리센서)들을 활용하여 통합 설계하였다. 이러한 통합 시스템이 완성이 되면 고소차, 해양/육상용 고공 작업을 할 수 있는 장비 등에 활용할 수 있을 예정이다.

• Journal of the Korea Society for Simulation
• /
• v.29 no.4
• /
• pp.95-109
• /
• 2020

In this paper, an optimal manufacturing system design problem in an automotive body assembly lines is introduced when various costs such as equipment investment costs are considered. Meta-model methodology based on simulation results has been used for estimating the performances of the system such as production rate and work-in-process levels. The objective function is minimizing total cost which satisfies the target production rate. The investment costs such as robots, buffers, transportation equipment, and the inventory holding cost of work-in-process have been included in the objective function. Harmony search method has been used for optimization.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.613-621
• /
• 2016

This research connected network equipment, including CCTV, PAGA, IP-PBX, and Legacy, in order to enable the operation and configuration of internal IP-based network equipment in maritime plants and vessels, both in the field and from remote places, and to allow for the support of remotely controlling such equipment. It also realized an operating program for the integrated network equipment management system to enable the monitoring and control of equipment status, operation condition, and notifications from distant places. By applying the operating program to satellite stations and vessels sailing on the sea, a performance test was conducted to evaluate data loss and transmission/reception delay in the communication section between the land and vessels. As a result, this research verified the normal operation of CCTV control and of real-time monitoring and control of the network equipment, including PAGA, IP-PBX, and Legacy under the FBB and MVSAT environments. It was observed that the transmission of CCTV video images with a large volume of data as well as the transmission and reception of voice data were found to be slightly delayed, indicating the need to develop technology to compress and convert data for real-time transmission and reception.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.203-205
• /
• 2019

위성항법시스템의 안정적인 정보 제공의 요구사항은 점차 증가하고 있지만, 의도적인 전파교란 및 자연환경에 의하여 성능이 저하된다. eLoran 시스템은 위성항법시스템의 단점을 보완하기위한 대표적인 지상파항법시스템으로 고출력 신호로 의도적인 전파교란에 강인한 장점이 있다. eLoran 시스템에서 사용자는 E-field 또는 H-field 2가지 종류의 수신 안테나를 사용 환경에 따라 적합한 것을 사용한다. 접지가 필요없고 상대적으로 주변 전자장비의 잡음에 강인한 H-field안테나는 두 개의 루프로 구성되어 루프간의 위상과 이득차이로 일정한 원형의 지향성을 가지지 못한다. 그러므로 수신한 신호의 방향에 따라 측정치의 변화가 발생하므로 H-field 안테나를 사용시에는 수신하는 신호의 방향에 따른 오차를 제거해야한다. 본 논문에서는 H-field 안테나와 송신국간의 기하학적 방향오차에 따른 오차를 제거하기 위한 후처리 필터를 제안하였다. eLoran 모의 신호생성기를 활용하여 오차를 분석하고 모델링하여 제거하는 기법을 개발하였다. 제안한 기법을 검증하기 위하여 시뮬레이션과 차량실험을 통하여 오차를 확인하고 제거하여 성능향상을 확인하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.2
• /
• pp.233-239
• /
• 2016

In this paper, a maintenance system is developed for LNG-FPSO topside and hullside equipment based CBM (Condition Based Maintenance) methodology. First, the development system defined the PWBS(Product Work Breakdown Structure) of major equipment of LNG-FPSO. Second, the development system developed the failure analysis, economic evaluation for optimal maintenance plan and database systems that save and manage information about equipment, failure mode, failure rate and failure cause. Finally, the verification of the development system was applied to the inlet system of topside and the pump tower system of hullside and the system was confirmed the effectiveness of CBMS(Condition Based Maintenance System).