• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.397-402
• /
• 2015

This study is to compare variation indexes by monthly, weekly and hourly using AIS data, which was collected for 365 days from January 1st to December 31st, 2013 at Mokpo Port and then, computed the maximum standard error by observation days. The comparison of monthly variation indexes showed that the monthly variation indexes for September and February were 1.11 and 0.84, respectively, in turn revealing that the maritime traffic in September was about 32.1 % larger than February. Also, the daily variation indexes for Tuesday and Sunday were 1.05 and 0.92, respectively, in turn revealing that the maritime traffic in Tuesday was about 14.1 % larger than Sunday. When the maritime traffic investigation is executed for at least 1 week in consideration of the daily variation index, it is possible to reduce the maximum standard error rate to be within 21 %. Therefore, if the maritime traffic investigation is made in the month and week with low maritime traffic, each variation index should be applied to reflect the actual maritime traffic.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.8-10
• /
• 2017

최근 빈번한 항해 사고에 대응하여 항해 안전에 대한 관심이 높아지고 있으며 특히 항해중인 선박의 안전 항해에 대한 육상 감시기술 개발에 많은 노력이 기울려 지고 있다. 이러한 육상용 항해안전 감시시스템은 항만 교통 번잡도에 따른 조종 위험성 평가 기능 및 해양기상에 따른 선박 안전성능 평가 기능 등으로 구성되며, 선박 안전성능 평가를 위하여 선박에서 전송되는 AIS정보를 운항정보로 변환하여 구축된 선박별 동특성 정보와 연결한 후 안전성능지수를 도출하는 기술 구현이 필요하다. 본 연구에서는 이러한 항해안전 감시시스템 개발을 위하여 환경 요인에 의한 항해중 선박의 위험 요소를 분석, 항해안전 평가 모델을 개발한 후 개발된 평가 모델에 대한 평가 기준을 제시하였고 각 평가 모델의 결과를 정량적 지수형태로 도출하여 안전항해 감시시스템의 정량적 평가 기능을 지원하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1222-1230
• /
• 2022

The rotor blade is an important component of a tidal stream turbine and is affected by a large thrust force and load due to the high density of seawater. Therefore, the performance must be secured through the geometrical and structural design of the blade and the blade structural safety to which the composite material is applied. In this study, a 1 MW class large turbine blade was designed using the blade element momentum (BEM) theory. GFRP is a fiber-reinforced plastic used for turbine blade materials. A sandwich structure was applied with CFRP to lay-up the blade cross-section. In addition, to evaluate structural safety according to flow variations, static load analysis within the linear elasticity range was performed using the fluid-structure interactive (FSI) method. Structural safety was evaluated by analyzing tip deflection, strain, and failure index of the blade due to bending moment. As a result, Model-B was able to reduce blade tip deflection and weight. In addition, safety could be secured by indicating that the failure index, inverse reserve factor (IRF), was 1 or less in all load ranges excluding 3.0*Vr of Model-A. In the future, structural safety will be evaluated by applying various failure theories and redesigning the laminated pattern as well as the change of blade material.

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.113-119
• /
• 2020

This study analyzed the relationship between consumers' awareness of marine products and the food index level, which is a sub-domain of the Pukyong Maritime Index. Specifically, the evaluation of marine products by Korean consumers verified the relationship between taste, nutrition, diversity, price, and safety-related systems and the food index. The analysis results were as follows. First, it was found that consumers' awareness of marine products had a significant positive correlation with the food index. Second, as a result of the regression analysis, the food index had an effect on the order of nutrition, taste, and price. These findings are required to understand consumers' awareness of aquatic products, and the food index can be used as the center of northeast asia sea region to provide a framework for improving consumer's satisfaction.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.2
• /
• pp.95-107
• /
• 2002

A reliability analysis on sliding of monolithic vertical caisson of composite breakwaters is extensively carried out in order to make the basis for the applicability of reliability-based design method. The required width of caisson of composite breakwaters is determined by the deterministic design method including the effect of impulsive breaking waves as a function of water depth, also studied interactively with the results of reliability analyses. It is found that the safety factor applied in current design may be a little over-weighted magnitude for the sliding of caisson. The reliability index/failure probability is also seen to slowly decrease as the water depth increases for a given wave condition and a safety factor. In addition, optimal safety factor can roughly be evaluated by using the concept of target reliability index for several incident waves. The variations of optimal safety factor may be resulted from the different wave conditions. Finally, it may be concluded from the sensitivity studies that the reliability index may be more depended on the incident wave angles and the wave periodsrather than on the bottom slopes and the thickness of rubble mound.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.185-187
• /
• 2013

일반적으로 사람은 육체적, 정신적 그리고 심리적 자극에 반응할 경우 스트레스(Stress)가 유발된다. 이 스트레스는 정상적인 업무수행 뿐만 아니라 건강에 악영향을 미칠 수 있고, 피로누적의 한 원인이 되기 한다. 특히 열악한 환경에서 직무를 수행하는 선원에게 있어서 스트레스는 해양사고의 직간접적인 요인이 될 수 있기 때문에 선박 인적자원관리의 한 측면으로 중요하게 다루어질 필요가 있다. 이 연구는 해운기업이 선원의 인사 및 안전관리 시스템에 활용할 수 있는 선원용 스트레스 평가도구를 개발하기 위한 것으로, 기본영역, 가족생활영역, 재정영역, 직업 및 선박생활영역에 대하여 90개의 항목으로 구성된 설문도구를 개발하여 설문조사를 수행하였고, Holmes & Rahe의 사회적응평가도구의 항목 및 평가지수와 비교분석하여 한국 선원의 문화적 차이를 고려한 설문도구를 개발하기 위한 기초적 연구를 수행하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.427-434
• /
• 2023

Oysters are an important organism, accounting for an average of 76% of shellfish aquaculture production. In this study, optimal habitat was searched for by calculating the Habitat Suitability Index (HSI) using water temperature, salinity, hydrodynamics, DO, SS and Chl.a in Jaran Bay. As a result, the inside of Jaran Bay was found to be a more suitable habitat than the outside with a wide entrance and rapid hydrodynamics. Oyster production and HSI showed a significant correlation (0.710, p<0.05). Hydrodynamics helps the growth of aquaculture organisms, such as food supply through seawater exchange in the bay, which showed a high correlation (0.709, p<0.05) with oyster production. It was found to have a greater effect on habitat suitability than Chl.a. The results of this study are expected to be helpful for the efficient conservation, use and management of coastal fisheries.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.415-420
• /
• 2018

The Energy Efficiency Design Index (EEDI) introduced by the Marine Environment P rotection Committee(MEPC) in International Maritime Organization(IMO) has significantly assisted in regulating CO2 emissions. However, in adverse weather conditions, it can lead to accidents due to slow steaming of vessels and low engine propulsion power. In response to this issue, the MEPC presented guidelines for the minimum propulsion power of the main engine for maintaining the course of vessels in adverse weather conditions. However, the guidelines are only applicable for vessels with a deadweight of 20,000 tons, leaving out small and medium ships. This study evaluated vessels subject to the guidelines of minimum propulsion power and proposed revised guidelines. In addition, relevant cases of marine accidents were investigated with the aim of investigating the minimum propulsion power of main engine for medium and small ships not covered by the guidelines. In order to achieve this, engine propulsion power was analyzed according to the size of the affected vessels. The results obtained from this study could be used as a minimum power criterion that can be considered for ship building to reduce marine accidents in adverse weather for small and medium ships.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.369-376
• /
• 2021

The International Maritime Organization has developed the Energy Efficiency Design Index, an index related to carbon dioxide emissions, to enforce regulations on newly built ships. In this study, a new type of energy-saving device called the ring stator was used for 158k crude oil carriers, whose hull form was developed as a very thin after-body hull to reduce the resistance by delaying separation. The Energy-Saving Device (ESD) particularly involving the duct, is not adapted to the thin-after body hull form-like container ship. This new ring stator was developed considering these characteristics. A parametric study was conducted through Computational Fluid Dynamics (CFD) analysis using the Star-CCM+ program, and approximately 3.4 % improvement in propulsion efficiency was achieved. Further optimization investigations and experimental studies should be conducted in the future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.483-492
• /
• 2020

In this study, we compared and analyzed the Revealed Comparative Advantage (RCA) and Trade Specialization Index (TSI) based on ballast water management systems (BWMS) trade data, which are related to the International Maritime Organization (IMO) Ballast Water Management Convention to suggest the current status of Korea's industrial competitiveness and suggest future development directions for the BWMS industry. As international interest in eco-friendly vessels is expanding, the IMO is engaged in dramatic discussions and agreement-making related to marine emissions of pollutants from ships. IMO member states that must implement this convention are striving to develop technology and secure industrial competitiveness as major industries in the eco-friendly shipping sector, with the BWMS industry experiencing a high market entry barrier and the possibility of the leading market entrants gaining leadership. The Republic of Korea accounts for 17 (approximately 38 %) of the 45 BWMS that received final approval as of October 2019. Based on trade data relating to product codes HS842219, HS84212, and HS89, the RCA index and TSI were calculated and compared. The findings revealed that the Republic of Korea has relative inferiority compared to countries such as Germany and Denmark. Despite this, Korea's favorable industrial environment, which includes several IMO-approved BWMS technologies and the possession of domestic certification institutions, is likely to strengthen its competitiveness in the BWMS market.