• Korean Journal of Remote Sensing
• /
• v.38 no.5_2
• /
• pp.707-723
• /
• 2022

Although satellite-based sea surface temperature (SST) is advantageous for monitoring large areas, spatiotemporal data gaps frequently occur due to various environmental or mechanical causes. Thus, it is crucial to fill in the gaps to maximize its usability. In this study, daily SST composite fields with a resolution of 4 km were produced through a two-step machine learning approach using polar-orbiting and geostationary satellite SST data. The first step was SST reconstruction based on Data Interpolate Convolutional AutoEncoder (DINCAE) using multi-satellite-derived SST data. The second step improved the reconstructed SST targeting in situ measurements based on light gradient boosting machine (LGBM) to finally produce daily SST composite fields. The DINCAE model was validated using random masks for 50 days, whereas the LGBM model was evaluated using leave-one-year-out cross-validation (LOYOCV). The SST reconstruction accuracy was high, resulting in R² of 0.98, and a root-mean-square-error (RMSE) of 0.97℃. The accuracy increase by the second step was also high when compared to in situ measurements, resulting in an RMSE decrease of 0.21-0.29℃ and an MAE decrease of 0.17-0.24℃. The SST composite fields generated using all in situ data in this study were comparable with the existing data assimilated SST composite fields. In addition, the LGBM model in the second step greatly reduced the overfitting, which was reported as a limitation in the previous study that used random forest. The spatial distribution of the corrected SST was similar to those of existing high resolution SST composite fields, revealing that spatial details of oceanic phenomena such as fronts, eddies and SST gradients were well simulated. This research demonstrated the potential to produce high resolution seamless SST composite fields using multi-satellite data and artificial intelligence.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.678-686
• /
• 2019

In this study, marine heat waves on coastal waters of Republic of Korea were detected using satellite-based Sea Surface Temperature Anomaly (SSTA). The detected results were compared with the warm water issues reported by the National Institute of Fisheries Science (NIFS). Marine heat waves detection algorithm using SSTA based on a threshold has proposed. The threshold value was defined as 2℃ for caution and 3℃ for warning issues, respectively. Daily averaged SST data from July to September of 2017-2018 were used to generate SSTA. The satellite-based detection results were classified into nine areas according to the place names used in the NIFS warm water issues. In the comparison of frequency of marine heat waves occurrence to each area with the warm water issue, most areas in the southern coast showed a similar pattern, that is probably NIFS uses spatially well distributed buoys. On the other hand, other sea areas had about two times more satellite detection results. This result seems to be because NIFS only considers the water temperature data measured at limited points. The results of this study are expected to contribute to the development of a satellite-based warm/cold water monitoring system in coastal waters.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.5
• /
• pp.340-350
• /
• 2020

A rapid refresh wave forecasting system has been developed using the sea wind on the Korea Local Analysis and Prediction System. We carried out a numerical experiment for wind-wave interaction as an important parameter in determining the forecasting performance. The simulation results based on the seasons of with typhoon and without typhoon has been compared with the observation of the ocean data buoy to verify the forecasting performance. In case of without typhoon, there was an underestimate of overall forecasting tendency, and it confirmed that an increase in the wind-wave interaction parameter leads to a decrease in the underestimate tendency and root mean square error (RMSE). As a result of typhoon season by applying the experiment condition with minimum RMSE on without typhoon, the forecasting error has increased in comparison with the result without typhoon season. It means that the wave model has considered the influence of the wind forcing on a relatively weak period on without typhoon, therefore, it might be that the wave model has not sufficiently reflected the nonlinear effect and the wave energy dissipation due to the strong wind forcing.

• Korean Journal of Remote Sensing
• /
• v.39 no.3
• /
• pp.355-361
• /
• 2023

Temperature of the Earth's surface is a crucial physical variable in understanding weather and atmospheric dynamics and in coping with extreme heat events that have a great impact on living organismsincluding humans. Thermalsensors on satellites have been a useful meansfor acquiring surface temperature information for wide areas on the globe, and thus characterization of its estimation uncertainty is of central importance for the utilization of the data. Among various factors that affect the estimation, the uncertainty caused by the algorithm itself has not been tested for the atmospheric environment of Korean vicinity. Thisstudy derivesthe uncertainty of the single-channel algorithm under the local atmospheric and oceanic conditions by using reanalysis data and buoy temperature data collected around Korea. Atmospheric profiles were retrieved from two types of reanalysis data, the fifth generation of European Centre for Medium-Range Weather Forecasts reanalysis of the global climate and weather (ERA5) and Modern-Era Retrospective analysis for Research and Applications-2 (MERRA-2) to investigate the effect of reanalysis data. MODerate resolution atmospheric TRANsmission (MODTRAN) was used as a radiative transfer code for simulating top of atmosphere radiance and the atmospheric correction for the temperature estimation. Water temperatures used for MODTRAN simulations and uncertainty estimation for the single-channel algorithm were obtained from marine weather buoyslocated in seas around the Korean Peninsula. Experiment results showed that the uncertainty of the algorithm varies by the water vapor contents in the atmosphere and is around 0.35K in the driest atmosphere and 0.46K in overall, regardless of the reanalysis data type. The uncertainty increased roughly in a linear manner as total precipitable water increased.

• Journal of the Korean earth science society
• /
• v.26 no.3
• /
• pp.240-252
• /
• 2005

The relationships between wave and wind around the Korean Peninsula have been analyzed with the data from the buoys moored at five stations (Dugjug-do, Chilbal-do, Geomoon -do, Geoje-do, Donghae) by Korea Meteorological Administration. Generally, the relationship between wave and wind is the highest at the stations in the West Sea and the lowest at the stations in the South Sea, and the middle at the station in the East Sea. The characteristics shown at each station are as follows. Highest wave is developed at Chilbal-do with strong northwesterly wind in winter because the sea is opened in the wind direction and wave is amplified by shoaling effect. At Chilbal-do, wave directions coincide with wind directions relatively well. On the other hand, waves are not fully developed at Dugjug-do in winter due to limited fetch since the sea is blocked by Hwanghae-do in the northwest direction. The limitation in fetch is more serious at the stations in the South Sea. In the South Sea, the direction of dominant northerly wind is blocked by land so that wave heights are small even with very strong northerly wind. In the South Sea, whatever wind direction is, waves dominantly come in the direction from the East China Sea, which are from the south at Geomoon-do and the southwest at Geoje-do. At these directions, waves are coming even with weak wind. At the station in the East Sea, waves are highly developed due to vast area, but not so high as in Chilbal-do because wind and wave directions do not coincide in many cases. As shown, wind direction is important in the wave development as well as wind speed. The reason is that the fetch is determined by wind direction. In the case of long-lasted wind with fixed direction at Chilbal-do and Dugjug-do, wave directions are well coincident with wind directions and wave heights increase with response time, which is the duration between the highest wind and wave. However, in the case of disagreement between wind and wave directions at the station in the East Sea, wave heights do not increase as highly as at Chilbal-do and Dugjug-do in spite of strong wind and longer response time. The results show us that waves are highly developed with strong wind, long fetch, and long duration, and also show that wave development ratios are different at different stations due to environmental factors such as the direction towards sea or land, bottom topography, and the scales of adjacent seas.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.3
• /
• pp.147-153
• /
• 2013

There exist various types of the WEC (Wave Energy Converter), and among them, the point absorber is the most popularly investigated type. However, it is difficult to find examples of systematically measured data analysis for the design of the point absorber type of power buoy in the world. The study investigates the wave load acting on the point absorber type resonance power buoy wave energy extraction system proposed by Kweon et al. (2010). This study analyzes the time series spectra with respect to the three-year wave data (2002.05.01~2005.03.29) measured using the pressure type wave gage at the seaside of north breakwater of Hupo harbor located in the east coast of the Korean peninsula. From the analysis results, it could be deduced that monthly wave period and wave height variations were apparent and that monthly wave powers were unevenly distributed annually. The average wave steepness of the usual wave was 0.01, lower than that of the wind wave range of 0.02-0.04. The mode of the average wave period has the value of 5.31 sec, while mode of the wave height of the applicable period has the value of 0.29 m. The occurrence probability of the peak period is a bi-modal type, with a mode value between 4.47 sec and 6.78 sec. The design wave period can be selected from the above four values of 0.01, 5.31, 4.47, 6.78. About 95% of measured wave heights are below 1 m. Through this study, it was found that a resonance power buoy system is necessary in coastal areas with low wave energy and that the optimal design for overcoming the uneven monthly distribution of wave power is a major task in the development of a WEF (Wave Energy Farm). Finding it impossible to express the average spectrum of the usual wave in terms of the standard spectrum equation, this study proposes a new spectrum equation with three parameters, with which basic data for the prediction of the power production using wave power buoy and the fatigue analysis of the system can be given.

• Journal of the Korean earth science society
• /
• v.40 no.3
• /
• pp.259-271
• /
• 2019

A statistical downscaling method was adopted in order to establish the high-resolution wave prediction system in the East Sea coastal area. This system used forecast data from the Global Wave Watch (GWW) model, and the East Sea and Busan Coastal Wave Watch (CWW) model operated by the Korea Meteorological Administration (KMA). We used the CWW forecast data until three days and the GWW forecast data from three to seven days to implement the statistical downscaling method (inverse distance weight interpolation and conditional merge). The two-dimensional and station wave heights as well as sea surface wind speed from the high-resolution coastal prediction system were verified with statistical analysis, using an initial analysis field and oceanic observation with buoys carried out by the KMA and the Korea Hydrographic and Oceanographic Agency (KHOA). Similar to the predictive performance of the GWW and the CWW data, the system has a high predictive performance at the initial stages that decreased gradually with forecast time. As a result, during the entire prediction period, the correlation coefficient and root mean square error of the predicted wave heights improved from 0.46 and 0.34 m to 0.6 and 0.28 m before and after applying the statistical downscaling method.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.1
• /
• pp.1-14
• /
• 2008

Eight comprehensive oceanographic cruises on a squared $30{\times}30\;km$ area have been made to investigate the short and long-term impacts on the water qualities due to the sand mining operations at Exclusive Economic Zone (EEZ) in the central Yellow Sea from 2004 to 2007. The area was categorized to 'Sand Mining Zone', 'Potentially Affected Zone', and 'Reference Zone'. The investigation covered suspended solids, nutrients (nitrate, nitrite, ammonium, phosphate), and chlorophyll-a in seawater and several parameters such as water temperature, salinity, pH, and ORP. Additionally, several intensive water collections were made to trace the suspended solids and other parameters along the turbid water by sand mining activities. The comprehensive investigation showed that suspended solids, nitrate, chlorophyll-a and ORP be sensitively responding parameters of seawater by sand mining operations. The intensive collection of seawater near the sand mining operation revealed that each parameter show different distribution pattern: suspended solids showed an oval-shaped distribution of the north-south direction of 8 km wide and the east-west direction of 5 km wide at the surface and bottom layers. On the other hand, phosphate showed so narrow distribution not to traceable. Also ammonium showed a limited distribution, but its boundary was connected to the high nitrate and chlorophyll-a concentrations with high N/P ratios. From the last 4 years of the comprehensive and intensive investigations, we found that suspended solids, ammonium, nitrate, chlorophyll-a, and ORP revealed the sensitive parameters of water quality for tracing the sand mining operations in seawater. Especially suspended solids and ORP would be useful tracers for monitoring the water qualities of remote area like EEZ in Yellow Sea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.875-884
• /
• 2000

Sea fog/stratus is very difficult to detect because of the characteristics of air-sea interaction and locality ,and the scantiness of the observed data from the oceans such as ships or ocean buoys. The aim of our study develops new algorism for sea fog detection by using Geostational Meteorological Satellite-5(GMS-5) and suggests the technics of its continuous detection. In this study, atmospheric synoptic patterns on sea fog day of May, 1999 are classified; cold air advection type(OOUTC, May 10, 1999) and warm air advection type(OOUTC, May 12, 1999), respectively, and we collected two case days in order to analyze variations of water vapor at Osan observation station during May 9-10, 1999.So as to detect daytime sea fog/stratus(OOUTC, May 10, 1999), composite image, visible accumulated histogram method and surface albedo method are used. The characteristic value during day showed A(min) .20% and DA < 10% when visible accumulated histogram method was applied. And the sea fog region which is detected is similar in composite image analysis and surface albedo method. Inland observation which visibility and relative humidity is beneath 1Km and 80%, respectively, at OOUTC, May 10,1999; Poryoung for visble accumulated histogram method and Poryoung, Mokp'o and Kangnung for surface albedo method. In case of nighttime sea fog(18UTC, May 10, 1999), IR accumulated histogram method and Maximum brightness temperature method are used, respectively. Maxium brightness temperature method dectected sea fog better than IR accumulated histogram method with the charateristic value that is T_max < T_max_trs, and then T_max is beneath 700hPa temperature of GDAPS(Global Data Assimilation and Prediction System). Sea fog region which is detected by Maxium brighness temperature method was similar to the result of National Oceanic and Atmosheric Administratio/Advanced Very High Resolution Radiometer (NOAA/AVHRR) DCD(Dual Channel Difference), but usually visibility and relative humidity are not agreed well in inland.

• Journal of the Korean earth science society
• /
• v.43 no.5
• /
• pp.604-617
• /
• 2022

Sea surface temperature (SST) is a key variable that can be used to understand ocean-atmosphere phenomena and predict climate change. Satellite microwave remote sensing enables the measurement of SST despite the presence of clouds and precipitation in the sensor path. Therefore, considering the high utilization of microwave SST, it is necessary to continuously verify its accuracy and analyze its error characteristics. In this study, the validation of the microwave global precision measurement (GPM)/GPM microwave imager (GMI) SST around the Northwest Pacific and Korean Peninsula was conducted using surface drifter temperature data for approximately eight years from March 2014 to December 2021. The GMI SST showed a bias of 0.09K and an average root mean square error of 0.97K compared to the actual SST, which was slightly higher than that observed in previous studies. In addition, the error characteristics of the GMI SST were related to environmental factors, such as latitude, distance from the coast, sea wind, and water vapor volume. Errors tended to increase in areas close to coastal areas within 300 km of land and in high-latitude areas. In addition, relatively high errors were found in the range of weak wind speeds (<6 m s^-1) during the day and strong wind speeds (>10 m s^-1) at night. Atmospheric water vapor contributed to high SST differences in very low ranges of <30 mm and in very high ranges of >60 mm. These errors are consistent with those observed in previous studies, in which GMI data were less accurate at low SST and were estimated to be due to differences in land and ocean radiation, wind-induced changes in sea surface roughness, and absorption of water vapor into the microwave atmosphere. These results suggest that the characteristics of the GMI SST differences should be clarified for more extensive use of microwave satellite SST calculations in the seas around the Korean Peninsula, including a part of the Northwest Pacific.