• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.3
• /
• pp.114-122
• /
• 2018

This paper introduces a non-hydrostatic wave model SWASH for simulating wave interactions with porous structures. This model calculates the flow in porous media based on volume-averaged Reynolds-averaged Navier-Stokes equations (VARANS) in ${\sigma}$-coordinate. The empirical coefficients of resistance used to account for the flow in a porous media often need to be measured or calibrated. In this study, the empirical resistance coefficients used in the model are calibrated and validated using laboratory experiments, involving dam-break flow through porous media, and solitary wave interactions with a porous structure. It is shown that the agreement between experimental and numerical results is generally satisfactory. It is also confirmed that non-hydrodynamic model, SWASH, is computationally much more efficient than the three-dimensional porous flow models based on VOF approach.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.1
• /
• pp.45-53
• /
• 2009

A possibility of the drag coefficient estimation in numerical water basins was discussed where the numerical solution were calculated by the 3-dimensional hydro-dynamical model (FLOW-$3D^{(R)}$) with the RNG $k-{\varepsilon}$ turbulence model. On the known cases of the drag coefficients for a rectangle, the numerical drag coefficients got $1.34{\sim}1.52$ and the wind tunnel values were $1.3{\sim}1.5$. For a cylinder, the numerical values were calculated as $0.75{\sim}0.78$ in the range of 0.5

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.1
• /
• pp.30-38
• /
• 2009

In recent years, there's been strong demand for coastal structures that have a permeability that serves water affinity and disaster prevention from wave attack. The aim of this study is to examine the wave transformation, including wave run-up that propagates over the coastal structures with a steep slope. A numerical model based on the nonlinear shallow water equation, together with the unsteady nonlinear Darcy law for fluid motion in permeable underlayer and laboratory measurements was carried out in terms of the free surface elevations and fluid particle velocities for the cases of regular and irregular waves over 1:5 impermeable and permeable slopes. The numerical results were used to evaluate the application and limitations of the PBREAK numerical model. The numerical model could predict the cross-shore variation of the wave profile reasonably, but showed less accurate results in the breaking zone that the mass and momentum influx is exchanged the most. Except near the wave crest, the computed depth averaged velocities could represent the measured profile below the trough level fairly well.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.133-136
• /
• 2010

공간부족과 해안 매립으로 발생되는 문제점을 해결하기 위하여 초대형부유구조물이 각광 받고 있으며, 대표적인 구조형식으로는 폰톤식과 반잠수식이 있다. 하지만 다양한 환경에 적용하기에는 구조적으로 한계를 가지고 있으며, 이를 극복하기 위해 부유체 하부에 수직으로 결합된 실린더에 공기를 가두어 지지되는 공기안정식 플랫폼이 제안되어졌으나 아직 개념단계에 머무르고 있는 실정이다. 이에 본 연구에서는 공기 안정식 초대형부유구조물의 실린더 내부 공기상태에 따른 안정성을 검토하기 위하여 유체정역학적 관계를 통해 실린더 내부의 공기 복원력 변수를 산정하였으며, 선형파랑하중에 따른 구조물의 응답을 최소화 할 수 있는 변수의 범위를 제시하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.178-178
• /
• 2022

일반적으로 하천은 상류에서 하류로 흐르지만, 하구에서 일어나는 해안으로부터의 염수의 역류 혹은 상류에서 홍수 발생 시 순간적으로 나타나는 역류 등 주 흐름을 거스르는 흐름이 종종 발생하는데 이는 예상치 못한 피해를 가져올 수 있으므로 최대한 방지해야 한다. 즉, 양방향 흐름이 일어나는 지역을 단방향 흐름으로 바꿔줄 수 있는 수리 구조물의 설치가 필요하다. 역방향 흐름을 제어하는 대표적인 예로는 보가 있는데, 보는 충분한 수위 확보뿐만 아니라 하구에서 역류하는 해수를 방지하는 역할도 한다. 다만, 상류와 하류를 수직적으로 분리함에 따라 물고기의 자유로운 이동을 제한하는 등 생태계를 단절시키는 부작용이 나타날 뿐만 아니라, 최근 정부의 정책에 따라 세종보, 죽산보 등의 보 해체 결정이 이루어지면서 이를 대체할 방안이 필요하다. 따라서 이번 연구에서는 수직적인 구조물이 아닌 수평적인 수리 구조물을 고안함으로써 생태계에 큰 영향을 주지 않으면서 가장 효과적으로 양방향 흐름을 제어할 수 있는 구조물 설계 모형을 탐구해보았다. 구조물 설계 아이디어는 심장의 판막에서 고안하였다. 판막은 특정한 방향성을 갖는 구조로 이루어져 있으면서 혈액의 역류를 방지하는 기관으로, 비슷한 방식으로 하천에도 특정 각도를 갖는 구조물의 설치를 통해 단방향 흐름을 유도할 수 있다고 판단하였다. 실제 하천 규모에서의 실험은 불가능하다고 판단, 전산 유체 프로그램 OpenFOAM을 이용하여 가상 수로의 모델링을 진행하였다. 얇은 판 형태의 흐름 제어 구조물을 수로 측면에 각각 설치 후, 같은 조건에서 정방향 흐름과 역방향 흐름에 대해 각각 시뮬레이션을 진행하였다. 이때, 두 흐름의 하류 유량 크기의 차이를 단방향 흐름을 정량화하는 수치로 산정한다. 시뮬레이션은 구조물과 흐름 방향이 이루는 각도, 구조물의 개수 및 간격, 구조물의 비대칭성 등 여러 가지 조건을 바꿔가면서 진행하고, 유속 분포 및 후류의 크기 등의 수리학적 현상을 파악하여 계산 결과를 분석한다. 분석 결과를 바탕으로 하류의 유량 차이가 가장 크게 나타나는 수리 구조물의 조건을 결정하고, 해당 구조물의 실제 적용 가능 여부를 판단한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.601-610
• /
• 2021

The tidal current patterns at Keum River Estuary before and after the construction of coastal structures were compared according to the CASES. The depth-integrated and tidal difference treatment applied FLOW2DH numerical model was used for the tidal current predictions. The test conditions consisted of before construction of coastal structures (CASE1), after construction of coastal structures (CASE2), and the addition of watergate operation(CASE1Q and CASE2Q), and present (CASE3). CASE1 showed a stable tidal current pattern, such as a natural estuary. In CASE2, the tidal current velocities and directions of the Keum River Estuary were changed due to the installed coastal structures. In particular, the tidal current velocities of the Gaeya open channel sections (P5~P9) in CASE2 were calculated to be 10~30% larger than that of CASE1. In the case of the Gunsan Inner Harbor (P4), which is closest to the Geum River Estuary, the ebb flow rate was approximately 250~300% faster than that of other CASEs due to the discharge of the watergate operation for 2.7 hours during the ebb of CASE1Q and CASE2Q. This will affect sediment transport, and it is predicted to lead to seabed changes. CASE3 is considered to be entering the stabilization stage according to the simulation of the tidal current velocities and directions of the Keum River Estuary and the surrounding coastal area.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.6
• /
• pp.246-256
• /
• 2021

Various development projects occurring on the coast cause an imbalance of surface sediments, causing coastal disasters or irreversible coastal erosion. Coastal erosion caused by the influence of various port structures built through coastal development can be directly identified by evaluating changes in the sediment budget, longshore sediment, and cross-shore sediment. In other words, it will be possible to evaluate the causality between coastal development and coastal erosion by classifying regions due to single cause and regions due to multiple causes according to the changes in the sediment classified into the three types mentioned above. In this study, the cause of long-term and continuous erosion was analyzed based on the analysis results of the coastal development history and the Coastal Erosion Monitoring targeting the coast of Gangwon-do and Gyeongsangbuk-do on the east coast. In addition, in order to evaluate the degree of erosion caused by the construction of artificial coastal structures, the concept of erosion impact assessment was established, three methods were proposed for the impact assessment. The erosion impact of Hajeo port was assessed using the results of satellite image analysis presented in the Coastal Erosion Monitoring Report, it was assessed that the development of Hajeo port had an impact of 93.4% on erosion, and that of the coastal road construction had an impact of 6.6%.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.335-345
• /
• 2022

Climate change is accelerating worldwide due to the recent rise in global temperature, and the intensity of typhoons is increasing due to the rise in seawater temperature around the Korean Peninsula. An increase in typhoon intensity is expected to increase not only wind damage, but also coastal damage caused by storm surge. Accordingly, in this study, a study of the method of reducing storm surges was conducted for the purpose of disaster prevention in order to respond to the increasing damage from storm surges. Storm surges caused by typhoons can be expected to be affected by structures located on the track of typhoon, and the effects of storm surges were studied by the eastern coast and the barrier island along the coast of the Gulf of Mexico in the United States. This study focused on this aspect and conducted related research, considering that storm surges in the southern coastal area of the Korean Peninsula could be directly or indirectly affected by Jeju Island, which is located on the track of typhoon. In order to analyze the impact of Jeju Island on storm surges, simulations were performed in various situations using a numerical analysis model. The results of using Jeju Island are thought to be able to be used to study new disaster prevention structures that respond to super typhoons.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.2
• /
• pp.122-134
• /
• 2020

On the many coasts of South Korea, including the eastern side, it has been recently increasing the coastal disaster such as the severe coastal erosion and road damage swept away by the wave. As one of the alternatives to prevent the coastal disaster, it has been widely studied the coastal disaster reduction method by the Low-Crested Structure (LCS) in the many countries including several European countries. In this study, the olaFLow model is used to simulate the permeable LCS and wave field of the LCS through the three-dimensional irregular waves numerical analysis on the basis of the previous research. From the numerical analysis, it is evaluated the H_rms, nearshore current and time-averaged turbulent kinetic energy. In addition, the pattern of nearshore current and spatial distribution of time-averaged turbulent kinetic energy are compared with the case of submerged breakwater under the irregular wave fields. As one of significant results, it is confirmed that the pattern of nearshore current is different with the case of submerged breakwater.

• 어항어장
• /
• s.89
• /
• pp.54-60
• /
• 2010

성능설계법은 ISO(국제표준화기구)를 중심으로 세계에서 공통화가 추진되어 국제규격으로서 인지되기 시작하고 있다. 내진성능을 고려한 설계에서 레벨1 레벨2의 2단계를 고려해 상정 지진동을 설정함과 동시에 각각의 지진동 레벨에 따라 적절히 허용재해정도를 설정하여, 구조물의 내진성을 종합적으로 규정한다.