• Title/Summary/Keyword: 해수 온도

Search Result 629, Processing Time 0.026 seconds

Variation of the Sea Surface Height around the Korean Peninsula with the Use of Multi-satellite Data (Topex/Poseidon, Jason-1, ERS, Envisat) and its Association with Sea Surface Temperature (복합위성자료(Topex/Poseidon, Jason-1, ERS, Envisat)를 이용한 한반도 주변해역에서의 해수면 고도 변화와 해수면 온도의 상관성 연구)

  • Ha, Kyung-Ja;Jeong, Gi-Yong;Jang, Sae-Rom;Kim, Ki-Young
    • Korean Journal of Remote Sensing
    • /
    • v.22 no.6
    • /
    • pp.519-531
    • /
    • 2006
  • Sea surface height (SSH) around fe Korean Peninsula was investigated as a rising rate of $3.89mm\;yr^{-1}$ on the average from 1993 to 2005, which is 1.3 times higher rising rate, compared to the world ocean. In the present study, to investigate SSH changes in regional sections of the East Sea, the Yellow Sea, the South Sea, and the Korea Strait, DT-MSLA (Delayed Time-Maps of Sea Level Anomalies) with multi-satellite data (Topex/Poseidon, Jason-1, ERS, Envisat), provided by AVISO (Archiving, Validation and Interpretation of Satellite Oceanographic data), was used. The periodicity in interannual variability was dominant for $4\sim5$ year in summer, and 3 year in winter as well as an increasing trend. The amplitude and phase for the annual and semi-annual mode in SSH and SST were investigated with harmonic analysis. The geographical distribution of amplitudes for comparison of SSH and SST are slightly reverse in southwest-northeast tilted direction. The monthly SST and SSH is highly correlated correlation coefficient about 0.7 with lag of one or two months over the East Sea and the South Sea during June-August. These results suggest that the Kuroshio stream is dominant during summer over these regions.

Three-Dimensional Numerical Modelling of Water Circulation and Thermal Diffusion (해수순환과 온배수 확산에 관한 3차원 수치모델링)

  • Jung Tae Sung;Kim Sang Ik;Kang See Whan
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.1 no.1
    • /
    • pp.93-101
    • /
    • 1998
  • Numerical models have been widely used to understand the structure of coastal currents and the transport mechanisms in regard to the fate of pollutants. This study focuses on the development of a three-dimensional model of coastal circulation and mass transport. The model was used to calculate coastal currents and temperature distributions of the thermal plume discharged from a power plant. The model results were compared with field-observed data. They showed the relatively good agreements with the data. The model can be used to estimate the currents and its mass transport in coastal waters.

  • PDF

Evaluation of Electric Power Consumption during Seawater Desalination (해수담수 공정의 전력비 평가기준에 관한 연구)

  • Shim, Kyu Dae;Kim, Chang Ryong;Choung, Joon Yeon;Kim, Dong Kyun
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.41 no.5
    • /
    • pp.485-492
    • /
    • 2021
  • This study focused on safety aspects surrounding energy consumption in the seawater desalination process in the Daesan Industrial Complex located on the West Sea coast. The safety index for energy consumption was evaluated under different salinities and temperatures of the incoming seawater. Temperature and salinity input data for the 1997-2018 period were obtained from the Marine Environment Information System, and the power required for reverse osmosis (RO) was applied to the program as per the data provided by the RO membrane manufacturer (Q-Plus v3.0). Notably, reasonable energy consumption guidelines were proposed during the design of the desalination facilities; in this regard, the desalination process required approximately 2.10-2.90 kWh/m3 electrical power. Moreover, the energy safety based on 95 % was estimated to be 2.80 kWh/m3 when the desalination facility was operated.

Evaporating heat transfer characteristics of Aluminum-brass tube for seawater cooling system using R-134a (해수냉각시스템용 Aluminium Brass Tube의 R-134a 증발열전달 특성)

  • Kang, In-Ho;Seol, Sung-Hoon;Yoon, Jung-In;Son, Chang-Hyo
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.41 no.3
    • /
    • pp.197-201
    • /
    • 2017
  • Most fishing vessels use an ice cooling system to manage and store captured fish. However, it is difficult to maintain an adequate temperature and salt concentration as well as operating time limitations in ice cooling systems. The purpose of this study is to investigate the heat transfer characteristics of flooded-type evaporators for a seawater cooling system to maintain proper seawater temperature in a fish tank. Experiments were conducted to investigate the heat transfer characteristics by changing the seawater temperature, flow rate, and saturation temperature of the refrigerant. It was confirmed that the heat transfer coefficient of an aluminum-brass tube was approximately 10% higher than that of a copper-nickel tube at the same heat flux. Furthermore, it was confirmed that applying the aluminum-brass tube to the heat transfer tube of a seawater heat exchanger was effective in terms of heat transfer. A comparison of the overall heat transfer coefficient of a single-tube heat exchanger and the flooded-type multi-tube heat exchanger for an 18-kW cooling system showed that the heat transfer coefficient of the single-tube heat exchanger was 25% higher under the same conditions. These results are considered to be important data for designing a flooded-type multi-tube heat exchanger.

Error Characteristics of Satellite-observed Sea Surface Temperatures in the Northeast Asian Sea (북동아시아 해역에서 인공위성 관측에 의한 해수면온도의 오차 특성)

  • Park, Kyung-Ae;Sakaida, Futoki;Kawamura, Hiroshi
    • Journal of the Korean earth science society
    • /
    • v.29 no.3
    • /
    • pp.280-289
    • /
    • 2008
  • An extensive set of both in-situ and satellite data regarding oceanic sea surface temperatures in Northeast Asian seas, collected over a 10-year period, was collocated and surveyed to assess the accuracy of satellite-observed sea surface temperatures (SST) and investigate the characteristics of satellite measured SST errors. This was done by subtracting insitu SST measurements from multi-channel SST (MCSST) measurements. 845 pieces of collocated data revealed that MCSST measurements had a root-mean-square error of about 0.89$^{\circ}C$ and a bias error of about 0.18$^{\circ}C$. The SST errors revealed a large latitudinal dependency with a range of $\pm3^{\circ}C$ around 40$^{\circ}N$, which was related to high spatial and temporal variability from smaller eddies, oceanic currents, and thermal fronts at higher latitudes. The MCSST measurements tended to be underestimated in winter and overestimated in summer when compared to in-situ measurements. This seasonal dependency was discovered from shipboard and moored buoy measurements, not satellite-tracked surface drifters, and revealed the existence of a strong vertical temperature gradient within a few meters of the upper ocean. This study emphasizes the need for an effort to consider and correct the significant skin-bulk SST difference which arises when calculating SST from satellite data.

Oceanic Skin-Bulk Temperature Difference through the Comparison of Satellite-Observed Sea Surface Temperature and In-Situ Measurements (인공위성관측 해수면온도와 현장관측 수온의 비교를 통해 본 해양 피층-표층 수온의 차이)

  • Park, Kyung-Ae;Sakaida, Futoki;Kawamura, Hiroshi
    • Korean Journal of Remote Sensing
    • /
    • v.24 no.4
    • /
    • pp.273-287
    • /
    • 2008
  • Characteristics of skin-bulk sea surface temperature (SST) differences in the Northeast Asia seas were analyzed by utilizing 845 collocated matchup data between NOAA/AVHRR data and oceanic in-situ temperature measurements for selected months from 1994 to 2003. In order to understand diurnal variation of SST within a few meters of the upper ocean, the matchup database were classified into four categories according to day-night and drifter-shipboard measurements. Temperature measurements from daytime drifters showed a good agreement with satellite MCSST (Multi-Channel Sea Surface Temperature) with an RMS error of about $0.56^{\circ}C$. Poor accuracy of SST with an rrns error of $1.12^{\circ}C$ was found in the case of daytime shipboard CTD (Conductivity, Temperature, Depth) measurements. SST differences between MCSST and in-situ measurements are caused by various errors coming from atmospheric moist effect, coastal effect, and others. Most of the remarkable errors were resulted from the diurnal variation of vertical temperature structure within a few meters as well as in-situ oceanic temperatures at different depth, about 20 cm for a satellite-tracked drifting buoy and a few meters for shipboard CTD or moored buoy. This study suggests that satellite-derived SST shows significant errors of about ${\pm}3^{\circ}C$ in some cases and therefore it should be carefully used for one's purpose on the base of in-depth understanding of skin-bulk SST difference and vertical temperature structure in regional sea.

태풍 진로의 기후학적 유형 분류와 유형에 따른 특성 분석

  • 허창회
    • Proceedings of the KGS Conference
    • /
    • 2003.11a
    • /
    • pp.59-64
    • /
    • 2003
  • 열대 서태평양에서는 연평균27개 정도의 태풍이 발생하고, 그 중 75% 이상이 6월부터 10월 사이에 발생한다(Ho et al. 2002). 태풍 활동은 해수면 온도가 26.5'c 이상, 약한 연직 바람 시어, 평균 이상의 대류권 중층의 습기, 조건 불안정한 대기, 하층 소용돌이도가 강한 환경 조건에서 활발해진다(Gray 1979; Frank 1987). 이러한 환경에서 발생한 태풍은 주변 대규모 순환과 해수면 온도, 그리고 그 내부적 요인이 복합적으로 작용하여 매우 다양한 진로 유형을 보이는데, 태풍의 진로를 유형별로 분류하기 위한 많은 노력이 기울여져 왔다. (중략)

  • PDF

Trace (Minor) Elemental and Isotopic Compositions of Aragonitic Mollusk Shells in the Eastern Coast and Cheju Island, Korea (한반도 동해안과 제주도 연안에서 발견되는 아라고나이트질 연체동물 각질의 미량원소 및 탄소와 산소 동위원소 함량의 변화)

  • Ji, Ok-Mi;Woo, Kyung-Sik
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.3 no.3
    • /
    • pp.112-123
    • /
    • 1998
  • The objectives of this study are to investigate the trace elemental and stable isotopic compositions of aragonitic mollusk shells, such as Gomphina veneriformis melanaegis, Mytilidae and Umbonium coastatum, from the eastern coast of Korean peninsula and Cheju Island, and to compare their variations with latitude, that is, the temperature of the ambient seawater at which the skeletons grew. The Mg compositions of Gomphina veneriformis melanaegis tend to decrease with increasing water temperature, whereas those of Mytilidae and Umbonium coastatum do not show any trend. Sr compositions of Mytilidae tend to increase with increasing water temperature, whereas those of Gomphina veneriformis melanaegis decrease. Fe compositions of Umbonium coastatum tend to decrease with increasing water temperature, whereas those of Gomphina veneriformis melanaegis increase. Fe compositions of Mytilidae do not show any trend with water-temperature variations. Ba compositions of all the skeletons do not show any trend with water-temperature variations. Cd compositions of Mytilidae and Umbonium coastatum do not show any trend with increasing water temperature, whereas those of Gomphina veneriformis melanaegis increase. Cu compositions of Gomphina veneriformis melanaegis increase with increasing water temperature, whereas Mytilidae and Umbonium coastatum do not show any trend. Pb compositions of Umbonium coastatum do not show any tend with increasing water temperature, but those of other skeletons increase. Zn compositions of Mytilidae tend to decrease with increasing water temperature, whereas those of Gomphina veneriformis melanaegis increase. Zn compositions of Umbonium coastatum do not show any trend with increasing water temperature. Estimated water temperatures from oxygen isotopic data of all the skeletons are higher than the range of water temperature of the shallow seawater of the East Sea and around Cheju Island. The oxygen isotopic compositions of all the skeletons are well clustered, but they do not show any trend with latitude. Therefore, this could reflect that the organisms may not have secreted their shells in oxygen isotopic equilibrium with ambient seawater due to vital effect. Thus, isotopic compositions of all the organisms in this study may not be suitable for paleotemperature estimate.

  • PDF

Evaporation Characteristics of Oil and Abundance Ratio of Hydrocarbon Compounds at Different Temperatures (온도 변수에 대한 유류의 휘발특성 및 탄화수소 화합물의 존재비에 관한 연구)

  • Choi, Jung-Sik
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.27 no.7
    • /
    • pp.1116-1123
    • /
    • 2021
  • Oil spilled in seawater undergoes physical and chemical changes as well as biological degradation through various weathering processes, such as evaporation, diffusion, dispersion, emulsification, dissolution, oxidation, and sedimentation. Evaporation is one of the most immediate and prompt weathering processes, and it has the greatest influence on majority of pollutants. In this study, the evaporation characteristics of different oil samples were studied; the volatilization characteristics of gasoline, kerosene, and diesel were compared at average seawater (25 ℃) and near-equator (35 ℃) temperatures. The oil samples were pre-treated and then collected at regular intervals. Gas chromatography-mass spectrometry analysis was performed, and the changes in the amount of the hydrocarbons were calculated.

A Methodology for 3-D Optimally-Interpolated Satellite Sea Surface Temperature Field and Limitation (인공위성 해수면온도 3-D 최적 내삽 합성장 생산 방법과 한계점)

  • Park, Kyung-Ae;Kim, Young-Ho
    • Journal of the Korean earth science society
    • /
    • v.30 no.2
    • /
    • pp.223-233
    • /
    • 2009
  • Three-dimensional (3-D) optimally-interpolated sea surface temperature (SST) field was produced by using AQUA/AMSR-E satellite data, and its limitations were described by comparing the temporal average of sea surface temperatures. The 3-D OI (Optimum Interpolation) SST showed a small error of less than $0.05^{\circ}C$ in the central North Pacific, but yielded large errors of greater than $0.4^{\circ}C$ at the coastal area where the satellite microwave data were not available. OI SST composite around pixels with no observation due to heavy rainfall or cloudy pixels had estimation errors of $0.1-0.15^{\circ}C$. Comparison with temporal means showed a tendency that overall OI SSTs were underestimated around heavy cloudy pixels and smoothed out by reducing the magnitude of SST fronts. In the low-latitude areas near the equator, OI SST field produced discontinuity, originated from the window size for the OI procedure. This was mainly caused by differences in the spatial scale of oceanic features. Infernal Rossby deformation radius, as a measure of spatial stale, showed dominant latitudinal variations with O(1) difference in the North Pacific. This study suggests that OI SST methodology should consider latitudinally-varying size of window and the characteristics of spatial scales of oceanic phenomena with substantial dependency on latitude and vertical structure of density.