• Korean Journal of Food Science and Technology
• /
• v.44 no.1
• /
• pp.14-20
• /
• 2012

The present study was carried out to isolate and identify of antioxidants from makgeolli. Makgeolli (3 L) was filtered and the residue was extracted by MeOH. The combined filtrates and MeOH extracts were successively solventfractionated by n-hexane, EtOAc, and BuOH. In the antioxidative activity against DPPH and $ABTS^+$ radicals of each fraction obtained after solvent-fractionation, EtOAc and BuOH layers showed higher activities than other fractions. Therefore, the two layers were respectively purified by column chromatography and HPLC. The isolated compounds were subjected to NMR and MS analyses and identified as 4-hydroxybenzaldehyde (1, 2.0 mg), 2-(4-hydroxyphenyl)ethanol (2, tyrosol, 15.3 mg), trans- and cis-ferulic acids (3 and 4, 1.2 mg), 1H-indole-3-ethanol (5, tryptophol, 3.4 mg), dimethyl succinate (6, 14.9 mg), succinic acid (7, 7.4 mg), and mono-methyl succinate (8, 7.8 mg). The presence of 1-5 in makgeolli have never before been reported.

• Journal of Life Science
• /
• v.23 no.12
• /
• pp.1495-1500
• /
• 2013

The objective of this study was to evaluate the anti-melanogenic effects of Hizikia fusiforme (HF) fractions in ${\alpha}$-melanocyte stimulating hormone-induced B16F10 mouse melanoma cells. Ethanol extractions of Hizikia fusiforme (EEHF) were subjected to fraction by using dichloromethane (CFHF), ethyl acetate (EAFHF), butanol (BFHF), and water (WFHF). EEHF, CFHF, and EAFHF inhibited tyrosinase activity and melanin synthesis in B16F10 mouse melanoma cells in a dose-dependent manner. The melanin contents were inhibited by 40.5% and 33.2% in response to treatment with 50 ${\mu}g/ml$ of EEHF and CFHF, respectively. In addition, tyrosinase activities showed a 53.3% and 54.1% reduction in treatment with 50 ${\mu}g/ml$ of EEHF and CFHF. Western blotting analysis showed that EEHF, CFHF, and EAFHF inhibited tyrosinase, TRP-1, TRP-2, and MITF expression in a dose-dependent manner. In conclusion, these findings indicate that ethanol and dichloromethane fractions of Hizikia fusiforme, which inhibit melanin synthesis and tyrosinase activity, are effective skin-whitening agents.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.214-214
• /
• 1999

다이아몬드를 반도체용 열방산용기판 등으로 사용하기 위해서는 수백 $\mu\textrm{m}$ 두께의 대면적 웨이퍼가 요구된다. 이를 위해서 DC are jet CVD, MW PACVD, DC PACVD 등이 개발되어, 현재 4"에서 8"까지의 많은 문제를 일으키고 있다. 본 연구에서는 multi-cathode DC PACVD법에 의한 4" 다이아몬드 웨이퍼의 합성과 합성된 막의 특성변화에 대한 연구를 수행하였다. 또한, 웨이퍼의 휨과 crack 발생거동과 대한 고찰을 통래 휨과 crack이 없는 웨이퍼의 제작방법을 고안하였다. 사용된 음극의 수는 일곱 개이며, 투입된 power는 각 음극 당 약 2.5kW(4.1 A-600V)이었다. 사용된 기판의 크기는 직경 4"이었다. 합성압력은 100Torr, 가스유량은 150sccm, 증착온도는 125$0^{\circ}C$~131$0^{\circ}C$, 수소가스네 메탄조성은 5%~8%이었다. 합성 중 막에 인가되는 응력은 합성 중 증착온도의 변화에 의해 제어하였다. 막의 결정도는 Raman spectroscopy 및 열전도도를 측정을 통해 분석하였다. 성장속도 및 다이아몬드 peak의 반가폭은 메탄조성 증가(5%~8%)에 따라 증가하여 각각 6.6~10.5$\mu\textrm{m}$/h 및 3.8~5.2 cm-1의 분포를 보였다. 6%CH4 및 7%CH4에서 합성된 웨이퍼에서 측정된 막의 열전도도는 11W/cmK~13W/cmK 정도로 높게 나타났다. 막두께의 uniformity는 최대 3.5%로 매우 균일하였다. 막에 인가되는 응력의 제어로 직경 4"k 합성면적에서 두께 1mm 이상의 균열 및 휨이 없는 다이아몬드 자유막 웨이퍼를 합성할 수 있었다.다이아몬드 자유막 웨이퍼를 합성할 수 있었다.active ion에 의해 sputtering 이 된다. 이때 plasma 처리기의 polymer 기판 후면에 magnet를 설치하여 높은 ionization을 발생시켜 처리 효과를 한층 높여 주었다. 이 plasma 처리는 표면 청정화, 표면 etching 이 동시에 행하는 것과 함께 장시간 처리에 의해 표면에서는 미세한 과, C=C기, -C-O-의 극성기의 도입에 의한 표면 개량이 된다는 것을 관찰할 수 있다. OPP polymer 표면을 Ar 100%로 plasma 처리한 경우 C-O, C=O 등의 carbonyl가 발생됨을 알 수 있었다. C-O, C=O 등의 carbynyl polor group이 도입됨에 따라 sputter된 Al의 접착력이 향상됨을 알 수 있으며, TEM 관찰 결과 grain size도 상당히 작아짐을 알 수 있었다.onte-Carlo 방법으로 처리하였다. 정지기장해석의 경우 상용 S/W인 Vector Fields를 사용하였다. 이를 통해 sputter 내 플라즈마 특성, target으로 입사하는 이온에너지 및 각 분포, 이들이 target erosion 형상에 미치는 영향을 살펴보았다. 또한 이들 결과로부터 간단한 sputtering 모델을 사용하여 target으로부터 sputter된 입자들이 substrate에 부착되는 현상을 Monte-Carlo 방법으로 추적하여 성막특성도 살펴보았다.다.다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인 측면에서도 고부가 가치의 제품 개발에 따른 새로운 수요 창출과 수익률 향상, 기존의 기능성 안료를 나노(nano)화하여 나노 입자를 제조, 기존의 기능성 안료에 대한 비용 절감 효과등을 유도 할 수 있다. 역시 기술적인 측면에서도 특수소재 개발에 있어 최적의 나노 입자 제어기술 개발 및 나노입자를 기능성 소재로 사용하여 새로운 제품의 제조와 고압 기상

• Journal of Korean Home Economics Education Association
• /
• v.21 no.4
• /
• pp.145-158
• /
• 2009

The purpose of this study was to find out how much home economics(HE) textbook was focused on what kind of factors in career education, by analyzing the HE textbooks from the 7th grade(1st grade of the middle school) to the 10th grade(1st grade of high school), which were developed by applying the 7th educational process. 12 textbooks which were published by three publishers were randomly selected by grade. This study used the instrument developed by Korea Research Institute for Vacational Education & Training(2001) as an analysis frame, along with a content analysis system. The results of this study were as follows. The publishers of HE textbook stressed similar points in each section of career education, evenly reflecting the objectives and contents of career education. Three kinds of publishers also placed the same weight on the factors of career education in each unit, and suggested the contents related to career education in the whole units. HE textbook was designed to lead learners to understand self and have interest in varied occupations. Additionally, it provided the learners with a chance to consider their career and occupation by means of detailed job information, and its contents including learning of occupational ability for job selection were useful to plan and prepare for career. Accordingly, as HE textbook is most effective to promote connection between work and learning and contains proper factors of career guidance, it is one of the most appropriate textbooks to deal with career education.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.551-558
• /
• 2005

The setting and hardening of concrete is accompanied with nonlinear temperature distribution caused by development of hydration heat of cement. Especially at early ages, this nonlinear distribution has a large influence on the crack evolution. As a result, in order to predict the exact temperature history in concrete structures it is required to examine thermal properties of concrete. In this study, the convection heat transfer coefficient which presents thermal transfer between surface of concrete and air, was experimentally investigated with variables such as velocity of wind, curing condition and ambient temperature. At initial stage, the convection heat transfer coefficient is overestimated by the evaporation quantity. So it is essential to modify the thermal equilibrium considered with the boiling effect. From experimental results, the convection heat transfer coefficient was calculated using equations of thermal equilibrium. Finally, the prediction model for equivalent convection heat transfer coefficient including effects of velocity of wind, curing condition, ambient temperature and boiling effects was theoretically proposed. The convection heat transfer coefficient in the proposed model increases with velocity of wind, and its dependance on wind velocity is varied with curing condition. This tendency is due to a combined heat transfer system of conduction through form and convection to air. From comparison with experimental results, the convection heat transfer coefficient by this model was well agreed with those by experimental results.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.1-5
• /
• 2018

In this work, we study the ion conductivity by analyzing the impedance to the high current density range that the PEMFC (Proton Exchange Membrane Fuel Cell) is actually operated. The effect of GDL (Gas Diffusion Layer)presence on impedance was investigated indirectly by measuring hydrogen permeability. When the RH (Relative Humidity)was higher than 60% in the low current range (< $80mA/cm^2$), the moisture content of the polymer membrane was sufficient and the ion conductivity of the membrane was not influenced by the current change. However, when RH was low, ion conductivity increased due to water production as current density increased. The ion conductivity of the membrane obtained by HFR (High Frequency Resistance) in the high current region ($100{\sim}800mA/cm^2$)was compared with the measured value and simulated value. At RH 100%, both experimental and simulated values showed constant ion conductivity without being influenced by current change. At 30~70% of RH, the ionic conductivity increased with increasing current density and tended to be constant.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.11
• /
• pp.1414-1418
• /
• 2017

Inhibition of advanced glycation end product (AGE) formation is a valuable therapeutic strategy for the regulation of diabetic complications. This study was conducted to identify potential therapeutic targets of anti-diabetic complications from irradiated mangiferin using AGE formation assay. Radiolytic degradation of the xanthone glucoside mangiferin by gamma-irradiation resulted in three degraded mangiferin analogues: mangiferdiol (1), mangiferinol (2), and isomangiferinol (3). Structures of the three newly generated compounds were characterized by interpretation of nuclear magnetic resonance ($^1H$, $^{13}C$ NMR, $^1H-^1H$ COSY, HSQC, HMBC, and NOESY) and mass spectroscopic data. The anti-diabetic complication of the generated mangiferin derivatives were tested using in vitro AGE formation method. Among the tested degraded products, mangiferinol (2) and isomangiferinol (3) exhibited significantly improved potency against AGE formation inhibitory activities with $IC_{50}$ values of $5.6{\pm}0.8$ and $7.6{\pm}0.9{\mu}M$, respectively. This result implies that xanthone derivatives generated from gamma-irradiated mangiferin might be beneficial for prevention of diabetic complication and related diseases.

• Journal of Korea Game Society
• /
• v.7 no.2
• /
• pp.83-90
• /
• 2007

One result of the trend towards globalization is an increased number of projects that focus on natural language processing. Automatic speech recognition (ASR) technologies, for example, hold great promise in facilitating global communications and collaborations. Unfortunately, to date, most research projects focus on single widely spoken languages. Therefore, the cost to adapt a particular ASR tool for use with other languages is often prohibitive. This work takes a more general approach. We propose an International Phoneticizing Engine (IPE) that interprets input files supplied in our Phonetic Language Identity (PLI) format to build a dictionary. IPE is language independent and rule based. It operates by decomposing the dictionary creation process into a set of well-defined steps. These steps reduce rule conflicts, allow for rule creation by people without linguistics training, and optimize run-time efficiency. Dictionaries created by the IPE can be used with the speech recognition system. IPE defines an easy-to-use systematic approach that can obtained 92.55% for the recognition rate of Korean speech and 89.93% for English.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.57-62
• /
• 2006

Busan New Port, under construction aiming for the hub of Northeast Asia and Partly in operation, had damaged up to 48 billion Won due to Typhoon 'maemi' in 2003. The present criteria of domestic harbor design only describes about the critical wave height with respect to the size of vessel for harbor tranquility. The berth operation ratio which represents the annual available berthing days is depending on the efficiency of cargo handling work and this depends on the motion of the moored vessel due to the wave action and the characteristics of cargo gears. The motion of moored vessel might be related not only to the wave height but also to wave period. Furthermore, the berth operation ratio relies on external forces such as currents and winds, including the characteristics of mooring system and the specification of the moored vessel. In this study we only deal with berth operation ratio in normal sea state, considering wave and current by measured data and numerical calculation. Especially we tried to evaluate the berth operation ratio for each berth adopting the variation of dredging and reclamation plan and the change of wave environment during the process of the new port construction. For better understanding and analysis of wave transformation process, we applied the steady state spectral wave model and extended mild-slope wave model to the related site. This study summarizes comparisons of harbor responses predicted by two numerical predictions obtained at Busan New port site. Field and numerical model analysis was conducted for the original port plan and the final corrected plan.

• Journal of Energy Engineering
• /
• v.17 no.2
• /
• pp.116-123
• /
• 2008

In order to study the heat transfer, effectiveness and pressure drop of an internal heat exchanger (IHX) for $CO_2$, heat pump under heating condition, the experiment and numerical analysis were performed. Four kinds of IHXs were used. The section-by-section method and Hardy-Cross method were used for the numerical analysis. The effects of IHX on the flow rate of refrigerant, the IHX length, the operating condition of a gas-cooler and an evaporator and the type of IHXs were investigated. With increasing the flow rate, the heat transfer rate increased about 25%. The heat transfer of the micro-channel tube was larger about 100% than that of the coaxial tube. With increasing the IHX length, the heat transfer rate decreased. The low-side pressure drop was larger compared with that of the high-side. And the pressure drop of the microchannel tube was larger about 100% than that of the coaxial tube. With increasing the high-side temperature and decreasing the low-side temperature, the heat transfer rate increased about 3%. From this study, we can see that new correlation on $CO_2$ heat transfer characteristics and tube type is necessary.