• Nuclear Engineering and Technology
• /
• v.23 no.1
• /
• pp.66-80
• /
• 1991

The LOFT intermediate break experiment L5-1, which simulates 12 inch diameter ECC line break in a typical PWR, has been analyzed using the reactor thermal/hydraulic analysis code RELAP5/MOD2, Cycle 36.04. The base calculation, which modeled the core with single flow channel and two heat structures without using the options of reflood and gap conductance model, has been successfully completed and compared with experimental data. Sensitivity studies were carried out to investigate the effects of nodalization at reactor vessel and core modeling on major thermal hydraulic parameters, especially on peak cladding temperature(PCT). These sensitivity items are : single flow channel and single heat structure (Case A), two flow channel and two heat structures (Case B), reflood option added (Case C) and both reflood and gap conductance options added (Case D). The code, RELAP5/MOD2 Cycle 36.04 with the base modeling, predicted the key parameters of LOFT IBLOCA Test L5-1 better than Cases A,B,C and D. Thus, it is concluded that the single flow channel modeling for core is better than the two flow channel modeling and two heat structure is also better than single heat structure modeling to predict PCT at the central fuel rods. It is, therefore, recommended to use the reflood option and not to use gap conductance option for this L5-1 type IBLOCA.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.12
• /
• pp.57-67
• /
• 2009

Along with the advanced construction technologies, the maximum size of coarse aggregate used for dam construction ranges from several cm to 1m. Testing the original gradation samples is not only expensive but also causes many technical difficulties. Generally, indoor tests are performed on the samples with the parallel grading method after which the results are applied to the design and interpretation of the actual geotechnical structure. In order to anticipate the exact behavior characteristics for the geotechnical structure, it is necessary to understand the changes in the shear behavior. In this study, the Large Triaxial Test was performed on the parallel grading method samples that were restructured with river bed sand-gravel, with a different maximum size, which is the material that was used to construct Dam B in Korea. And the Stress - Strain characteristics of the parallel grading method samples and the characteristics of the shear strength were compared and analyzed. In the test results, the coarse-grained showed strain softening and expansion behavior of the volume, which became more obvious as the maximum size increased. The internal angle of friction and the shear strength appeared to increase as the maximum size of the parallel grading method sample increased.

• Journal of Korea Water Resources Association
• /
• v.55 no.4
• /
• pp.257-266
• /
• 2022

Inundation damage is increasing every year due to localized heavy rain and an increase of rainfall exceeding the design frequency. Accordingly, the importance of hydraulic structures for flood control and defense is also increasing. The hydraulic structures are designed according to its purpose and performance, and the amount of flood is an important calculation factor. However, in Korea, design rainfall is used as input data for hydrological analysis for the design of hydraulic structures due to the lack of sufficient data and the lack of reliability of observation data. Accurate probability rainfall and its temporal distribution are important factors to estimate the design rainfall. In practice, the regression equation of temporal distribution for the design rainfall is calculated using the cumulative rainfall percentage of Huff's quartile method. In addition, the 6^th order polynomial regression equation which shows high overall accuracy, is uniformly used. In this study, the optimized regression equation of temporal distribution is derived using the variable selection method according to the principle of parsimony in statistical modeling. The derived regression equation of temporal distribution is verified through the significance test. As a result of this study, it is most appropriate to derive the regression equation of temporal distribution using the stepwise selection method, which has the advantages of both forward selection and backward elimination.

• Journal of Korea Water Resources Association
• /
• v.56 no.10
• /
• pp.667-678
• /
• 2023

In this study, quasi-3D inundation flow simulations were conducted for a simplified subway station configuration. The effects of variations in rainwater inflow locations and discharge were investigated, analyzing the resulting inundation flow patterns and flood risk. The inundation simulation results calculated the incipient velocities for slipping and toppling accidents to assess pedestrian safety. The results indicated that velocities exceeding the incipient velocity for slipping accidents mainly occurred on the flooded staircase. Meanwhile, velocities surpassing the incipient toppling accidents were observed around the staircase and the corridor near the staircase leading to B2F. This observation is consistent with the results from the specific force distribution analysis. To provide detailed flood risk assessments, the Flood Hazard Degree (FD) was applied with four levels of criteria, along with the Flood Intensity Factor (FIF). The results demonstrated that FD identified a broader area at risk of flood-induced consequences compared to FIF. When comparing the different inundation risk assessment methods, the specific force method tended to overestimate the risk area, whereas FIF tended to underestimate it. Furthermore, among all assessment methods, the influence of rainwater discharge was found to have a more dominant effect on flood risk assessment compared to the number of rainwater inflow locations. Additionally, the direction of inundation flow influenced the assessed risk, with collision-induced flow patterns leading to higher flood risk than those with identical flow directions.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.6
• /
• pp.478-488
• /
• 2023

This paper investigates the naval application of laser communication as a potential replacement for traditional acoustic wave communication in underwater environments. We developed a laser transceiver using Arduino and MATLAB, conducting a water tank experiment to validate communication feasibility across diverse underwater conditions. In the first experiment, when transmitting data through a laser, the desired message was converted into data and transmitted, received, and confirmed to be converted into the correct message. In the second experiment, the operation of communication in underwater situations was confirmed, and in the third experiment, the intensity of light was measured using the CDS illuminance sensor module and the limits of laser communication were measured and confirmed in various underwater situations. Additionally, MATLAB code was employed to gather data on salinity, water temperature, and water depth for calculating turbidity. Optimal wavelength values (532nm, 633nm, 785nm, 1064nm) corresponding to calculated turbidity levels (5, 20, 55, 180) were determined and presented. The study then focuses on analyzing potential applications in naval tactical communication, remote sensing, and underwater drone control. Finally, we propose measures for overcoming current technological limitations and enhancing performance.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.4
• /
• pp.308-319
• /
• 2008

Temporal variations in plankton assemblages and environmental factors in Asan Bay and their relationships were examined with the data collected from February till early June, 2005. Seawater temperatures showed typical pattern of temporal change observed in temperate waters. Salinity variation was minor. Phytoplankton biomass showed two peaks, one in February only in the inner part of the bay and the other in May in the whole bay. Phytoplankton succession was clearly shown with the increase of seawater temperatures. Diatom (Bacillariophyceae) dominated in February, diatom and cryptomonads (Cryptophyceae) prevailed in May, and dinoflagellates (Dinophyceae) was most abundant in June. Spring bloom in Asan Bay occurred about one month earlier than those observed in temperate seas. Among the inorganic nutrients (N, P and Si), only silicate concentration showed a significant negative correlation with phytoplankton biomass, indicating the sink of this nutrient in the bay to be the uptake by phytoplankton. Nitrate concentration seemed to be a limiting factor in this bay during the study period. Mesozooplankton abundances showed a significant positive correlation with seawater temperatures and a significant negative correlation with phytoplankton biomass. Increase of mesozooplankton abundance followed phytoplankton increase with the time lag of about two months. This increase of zooplankton seemed to be the result of increased seawater temperatures and food.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.107-117
• /
• 2024

The objective of this study is to estimate riverbed fluctuations and the volume of aggregate extraction attributable to climate change. Rainfall-runoff modeling, utilizing the SWAT model based on climate change scenarios, as well as long-term riverbed fluctuation modeling, employing the HEC-RAS model, were conducted for the Nonsan River basin. The analysis of rainfall-runoff and sediment transport under the SSP5-8.5 scenario for the early part of the future indicates that differences in annual precipitation may exceed 600 mm, resulting in a corresponding variation in the basin's sediment discharge by more than 30,000 tons per year. Additionally, long-term riverbed fluctuation modeling of the lower reaches of the Nonsan Stream has identified a potential aggregate extraction area. It is estimated that aggregate extraction could be feasible within a 2.455 km stretch upstream, approximately 4.6 to 6.9 km from the confluence with the Geum River. These findings suggest that the risk of climate crises, such as extreme rainfall or droughts, could increase due to abnormal weather conditions, and the increase in variability could affect long-term aggregate extraction. Therefore, it is considered important to take into account the impact of climate change in future long-term aggregate extraction planning and policy formulation.

• Economic and Environmental Geology
• /
• v.57 no.1
• /
• pp.93-105
• /
• 2024

Chilgok Geummubong tree fern fossil site is the type locality where tree fern stem fossils (Cyathocaulis naktongensis) were first discovered by Tateiwa in 1925. Recognized for its academic value, it was designated as a natural monument in the 1930s during the Japanese colonial period, and preserved and managed for over 90 years. However, at the time of discovery, the stratigraphic level of tree fern fossils could not be located because the fossils were fragments detached from the rock body, and thus the Geummubong area where the conglomerate/sandstone layers of the Nakdong Formation are distributed, has been designated as a cultural heritage area. Only in the 2000s, when tree fern fossils were directly recovered from the outcrops near the designated area, the sedimentary rock facies containing the fossils were interpreted, and the anatomical characteristics of the Mesozoic tree fern fossils could be described and identified as a species level. Such studies are, in these days, redefining classification criteria done by Japanese paleontologist, Ogura. That is, Korean researchers pointed out that the classification criteria of the tree fern fossils (Cyathocaulis) reported early from Chilgok were ambiguous, and the possibility that the two species were the same species was suggested. In addition, it is necessary to reorganize designated areas as a way to resolve social conflicts and civil complaints caused by various regulations that have continued for a long time.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.5
• /
• pp.246-256
• /
• 2006

The plane wave reflection coefficient is an acoustic property containing all the information concerning the ocean bottom and can be used as an input parameter to various acoustic propagation models. In this paper, we measure the plane wave reflection coefficient, the sound speed, thd the attenuation for saturated granular medium in the water tank. Three kinds of glass beads and natural sand are used as the granular medium. The reflection experiment is performed with the sinusoidal tone bursts of 100 kHz at incident angles from 28 to 53 degrees, and the sound speed and attenuation experiment are performed also with the same signal. From the measured reflection signal, the reflection coefficient is calculated with the self calibration method and the experimental uncertainties are discussed. The sound speed and the attenuation measurements are used for the estimation of the porosity and permeability, the main Biot parameters. The estimated values are compared to the directly measured values and used as input values to the Biot theory in order to calculate the theoretical reflection coefficient. Finally, the reflection coefficient predicted by Biot theory is compared to the measured reflection coefficient and their characteristics are discussed.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.222-228
• /
• 2009

This study compared the sound spectrums of pyeonjong remains and pyeonjong replica to investigate tuning ways of bells. pyeonjong remains, exhibited at King Sejong Memorial Museum and pyeonjong replica, played at the National Center for Korean Traditional Performance Arts were analyzed. To get mode frequencies and mode shapes, pyeonjong replicas' sound spectrums were analyzed and modal analyses by TV holography were performed. Also pyeonjong remains' sound spectrum were analyzed. Nominal frequencies on the pyeonjong replica and remains showed differences in a range between 9.8 cent and 203 cent. Two facts were inferred as causes of the differences, the tuning conditions of pyeonjong remains were not good and C4 in western tempered scale was preferred as the sound standard of Kukak, whangjong. Relative ratio of higher mode frequencies to the nominal frequencies were calculated to figure out tonal differences between two pyeonjongs. The differences in relative ratio of higher mode frequencies except (3,0)a and (3,0)b modes were significants as well as beyond the just noticeable difference. These results implied that the tonal differences between two pyeonjongs could exist. More pyeonjong remains are needed to be investigated to confirm this result in addition to the analyses of alloy components and bell structure of pyeonjong remains and replica.