• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.282-282
• /
• 2023

도시침수와 도시열섬 등 도시화 및 기후변화로 인한 물 및 환경문제에 대비하기 위해서는 고해상도 물순환 및 열순환 해석 기술이 필수적이다. 도심지의 고밀도 건축물 및 식생 등 다양한 토지피복의 조합은 물/열 순환에 직접적인 영향을 미치는 요인이며, 물리과정에 대한 이해를 높이기 위해서는 고해상도 모의 및 관측이 필요하다. WRF-Hydro는 침투 및 증발산, 열 순환, 지표와 하천 및 저수지 추적 등 여러 물/열 순환 요소 해석 모듈을 연동할 수 있는 공간분포형 수문 해석 시스템이다. 본 연구에서는 WRF-Hydro를 기반으로 낙동강 지류인 금호강 유역에 대한 고해상도 물순환 및 열순환 모형을 구축하여, 토양수분, 하천 유량, 지표온도, 증발산 등 수문 요소 해석 결과를 분석한다. WRF-Hydro 모형의 입력자료 구축 시 고해상도 토지피복 및 토양도를 적용하고, 기상자료에는 국내 지상관측자료와 국외 재분석자료를 비교, 분석하여 자료의 신뢰성을 분석한다. 또한, ECOSTRESS 등 고해상도 원격탐사자료로부터의 열, 증발산 관련 추정 자료를 모의 결과와 비교하여, 열순환 해석의 불확실성을 평가한다. 물순환과 열순환의 해석의 신뢰도를 동시에 향상하기 위한 분포형 모형의 구축 및 매개변수 보정 방안에 대해 토의한다.

• Composites Research
• /
• v.22 no.5
• /
• pp.24-29
• /
• 2009

In this paper, a post-tensioned reinforced concrete slab was analyzed by the specially orthotropic laminates theory. Both the geometrical and material property of the cross section of the slab was considered symmetrically with respect to the neutral surface so that the bending extension coupling stiffness, $B_{ij}=0$, and $D_{16}=D_{26}=0$. Reinforced concrete slab behave as specially orthotropic plates. In general, the analytical solution for such complex systems is very difficult to obtain. Thus, finite difference method was used for analysis of the problem. In this paper, the finite difference method and the beam theory were used for analysis. The result of beam analysis was modified to obtain the solution of the plate analysis.

• Tunnel and Underground Space
• /
• v.33 no.2
• /
• pp.83-94
• /
• 2023

Unlike the conventional triaxial test cells for cylindrical specimens, which impose uniform lateral confining pressures, the GREAT (Geo-Reservoir Experimental Analogue Technology) cell can exert differential radial stresses using eight independently-controlled pairs of lateral loading elements and thereby generate horizontal stress fields with various magnitudes and orientations. In the preceding companion paper, GREAT cell tests were numerically simulated under different mechanical loading conditions and the validity of the numerical model was investigated by comparing experimental and numerical results for circumferential strain. In the present study, we simulated GREAT cell tests for an artificial sample containing a fracture under both mechanical loading and fluid flow conditions. The numerical simulation was carried out by varying the mechanical properties of the fracture surface, which were unknown. The numerical responses (circumferential strains) of the sample were compared with experimental data and a good match was found between the numerical and experimental results under certain mechanical conditions of the fracture surface. Additionally, the effect of fluid flow conditions on the mechanical behavior of the sample was investigated and discussed.

• Cartoon and Animation Studies
• /
• s.42
• /
• pp.81-104
• /
• 2016

was released in South Korea in 2002 with more than 2million audiences and had been appraised as a successful and sensational work. The work let the audiences highly evoke interest and curiosity through offering magnificent sceneries, weird and funny creatures and stimulating imagination, before having no idea about the work producted by Miyajaki Hayao, one of the greatest directors. Well-concentrated his works seem to be easy to understand but have a variety of meanings in very different ways. Expending the range of analysis of his works, for example, from its technical to cultural and philosophical etc. has an enormous amount of value of diversity such as a ray of light passing through a prism. For this reason, has been studied in many different views. This paper will analyse this animation in respect of ideas of eastern as well as western to show differences from former papers. The ideas of eastern and western seem to be not in a line, but this study will suggest that the two different ideas are not different, actually. Through plural analysis of , ask questions about what life is and what the direction is.

• Tunnel and Underground Space
• /
• v.13 no.6
• /
• pp.444-454
• /
• 2003

Rock fragmentation technique by cutter penetration has widely been used in the mechanical tunnel excavation. Microcracks propagate and interact because of locally concentrated high stress induced by cutter penetration. which is caused by heterogeneity of rocks. In this study Weibull distribution function and degradation index are used to consider the strength heterogeneity of a rock and the degradation of rock properties after failure. Through the numerical analyses, it is shown that the lateral pressure has an important influence on the rock fragmentation. In the single cutter penetration, large chips are formed as lateral pressure increase. The cutter spacing is also an important factor that affects the rock fragmentation in the double cutter penetration. The fragmentation efficiency of the double cutter penetration is better when cutter spacing is 70 mm than 40 mm and 100 mm. From the results, it is expected that this study can be applied to a TBM tunnel design by understanding of chipping process and mechanism of rock due to cutter penetration.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.405-411
• /
• 2016

This paper presented the theory related to a two dimensional linear cross-sectional analysis, recovery relationship and a one-dimensional nonlinear beam analysis for composite beam with initial twist and high aspect ratio. Using VABS including related theory, preceding research data of the composite wing structure has been modeled and compared. Cross-sectional analysis was performed and 1-D beam was modeled at cutting point including all the details of real geometry and material. The 3-D strain distribution and margin of safety at recovery point was calculated based on the global behavior of the 1-D beam analysis and visualize numerical results.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.1
• /
• pp.79-90
• /
• 2002

The structural analysis such as rigid frame analysis has been used for the design of cut and cover tunnel due to its simplicity and convenience. This analysis, however, could not account for the geometrical factors such as interface elements, slope of excavation plane, distance between lining and excavation plane, etc. To develop the analysis technique and design technology for the cut and cover tunnel, in this study, the numerical analyses considering not only geometrical but geotechnical factors are conducted. Especially, the effects on the mechanical behaviors of cut and cover tunnel due to the slope of excavation plane and the distance between lining and excavation plane are mainly focused in this study.

• Computational Structural Engineering
• /
• v.3 no.2
• /
• pp.117-128
• /
• 1990

This study was intended to provide efficient algorithms for high quality postprocessing on the basis of microcomputers with limited capacity and functionality. Improved methods of postprocessing including stress contouring, internal force diagraming, and displacement animation, were proposed and implemented into a new finite element system. Visualization of three-dimensional structural behaviors was treated with special emphasis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.139-144
• /
• 1991

4WD자동차의 엔진마운트 설계기법의 정리 및 실제차량의 실험적 mode 해 석을 통해 다음과 같은 결론을 얻었다. 1. 4WD자동차의 엔진마운트 설계 개념을 체계화시키고, 이를 실제차량에 대 해서 실험적 mode해석을 해본 결과 잘 일치함을 확인하였다. 2. power transmission system에 부가되는 장치(front propeller shaft)의 영 향을 검토한바, frequency shift현상이 발생함을 확인하였다. 이러한 영향은 이들 부가장치들의 질량증가 및 관성모멘트의 변화로 기인되며, 질량의 증가 보다는 관성모멘트의 영향이 상대적으로 크리라 판단된다.

• Journal of Energy Engineering
• /
• v.9 no.2
• /
• pp.138-145
• /
• 2000

고체재료의 열확산계수나 열전도계수와 같은 열물성을 비접촉식 방법으로 측정하기 위하여 광열변위법에 대한 이론적인 해석을 수행하였다. 가열빔의 파형을 코사인파, 삼각파 그리고 사각파로 가정하여 2차원 열전도 방정식과 열탄성 방정식의 엄밀해를 구하였고, 이를 가열빔으로부터 직접 구한 실제파의 결과와 비교하였다. 코사인파의 결과가 다른 파형에 비하여 실제파와 가장 유사한 것으로 보아 비교적 해석이 복잡한 실제파를 코사인파로 가정하여도 무방하다.