• Journal of the Korean Institute of Gas
• /
• v.23 no.4
• /
• pp.19-27
• /
• 2019

The consumption of liquefied natural gas (LNG) has increased annually due to the strengthening of international environmental regulations. In order to produce stable and efficient LNG, it is essential to divide the global (overall) operating condition and construct a quick and accurate monitoring system for each operation condition. In this study, multi-mode monitoring system is proposed to the LNG plant fractionation process. First, global normal operation data is divided to local (subdivide) normal operation data using global principal component analysis (PCA) and k-means clustering method. And then, the data to be analyzed were matched with the local normal mode. Finally, it is determined the state of process abnormality through the local PCA. The proposed method is applied to 45 fault case and it proved to be more than 5~10% efficient compared to the global PCA and univariate monitoring.

• Journal of the Korea Society for Simulation
• /
• v.18 no.4
• /
• pp.67-79
• /
• 2009

Because a product in the car industry has a short life cycle in recent years, the process planning and the manufacturing lines have to be changed frequently. Most of time, repositioning an existing facility and modifying used control information are faster than making completely new process planning. However, control information and control code such as PLC code are difficult to understand. Hence, industries prefer writing a new control code instead of using the existing complex one. It shows the lack of information reusability in the existing process planning. As a result, to reduce this redundancy and lack of reusability, we propose a SOS-Net modeling method. SOS-Net is a standard methodology used to describe control information. It is based on the Device Structure which consists of sensor information derived from device hardware information. Thus, SOS-Net can describe a real control state for automated manufacturing systems. The SOS-Net model is easy to understand and can be converted into PLC Code easily. It also enables to modify control information, thus increases the reusability of the new process planning. Proposed model in this paper plays an intermediary role between the process planning and PLC code generation. It can reduce the process planning and implementation time as well as cost.

• Composites Research
• /
• v.32 no.6
• /
• pp.327-334
• /
• 2019

The delamination is a special mode of failure occurring in composite laminates. Several numerical studies with finite element analysis have been carried out on the delamination behavior of unidirectional composite laminates. On the other hand, the fracture for the multi-directional composite laminates may occur not only along the resin-fiber interface between plies known as interply or interlaminar fracture but also within a ply known as interyarn or intralaminar fracture accompanied by matrix cracking and fiber bridging. In addition, interlaminar and intralaminar cracks appear at irregular proportions and intralaminar cracks proceeded at arbitrary angle. The probabilistic analysis method for the prediction of crack growth behavior within a layer is more advantageous than the deterministic analysis method. In this paper, we analyze the crack path when the mode I load is applied to the cross-ply carbon/epoxy composite laminates and collect and analyze the probability data to be used as the basis of the probabilistic analysis in the future. Two criteria for the theoretical analysis of the crack growth direction were proposed by analyzing the stress field at the crack tip of orthotropic materials. Using the proposed method, the crack growth directions of the cross-ply carbon/epoxy laminates were analyzed qualitatively and quantitatively and compared with experimental results.

• Journal of Korea Water Resources Association
• /
• v.53 no.12
• /
• pp.1183-1192
• /
• 2020

Economic analysis is a basic step in establishing disaster mitigation measures, but it is difficult to verify the results due to uncertainty. Therefore, the scope of investigation and analysis is wide. However, it is difficult to predict the amount of damage caused by flooding because the collection of relevant data is limited in the ungauged basin. In this study, distributed runoff analysis and flooding analysis were performed, and a method of estimating the amount of flood damage in the ungauged basin was proposed using collectible social and economic indicators and flood analysis results. For distributed runoff analysis and flooding analysis, GRM (Grid based Rainfall-runoff Model) and G2D (Grid based 2-Dimensional land surface flood model) developed by Korea Institute of Civil engineering and Building Technology were used. The method of substituting collectible social and economic indicators into the simple method and improvement method was used to estimate the amount of flood damage. As a result of the study, it was possible to estimate the amount of flood damage using satellite data and social and economic indicators in the ungauged basin.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.5
• /
• pp.615-624
• /
• 2006

In the present paper, an extended composite beam theory that has no restriction on the lay-up and can account for Poisson effect which is significant for composite materials is proposed. Buckling equations for composite thin-walled members which are subjected to axial compression are derived based on the composite beam theory. In order to check the validity of the derived buckling equations, the results of experiments on the flexural-torsional buckling of vinylester/E-glass and polyester/E-glass pultruded T-section members and the flexural buckling of vinylester/E-glass pultruded H-section members are used as numerical examples. The comparison of the analytical results to the experimental and FE analysis results reveals that the proposed buckling equations predict the buckling loads of pultruded members conservatively by about 7%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.346-346
• /
• 2017

기후변화에 따른 기상이변의 동시다발적인 발현은 농촌 지역의 홍수 발생 빈도를 증가시키고 있다. 현재의 기후시스템은 과거의 강우빈도를 기준으로 산정한 설계기준을 벗어나는 강우 사상을 빈번하게 발생시키므로 설계변수의 불확실성을 보다 합리적인 방법으로 정량화할 필요가 있다. 본 연구의 목적은 기후변화에 대응하여 확률론을 이용한 농업용 저수지의 홍수 취약성을 산정하는 데 있다. 먼저 홍수 취약성 해석에 필요한 과거와 미래 수문 자료를 수집하고 전처리 과정을 통해 해석에 적합한 자료로 구축하였다. 설계변수의 불확실성을 분석하기 위해 지속시간별 최대강우량, 유입 설계홍수량에 대해 부트스트랩 (bootstrap) 기법을 적용하여 자료를 재추출하였다. 부트스트 랩은 표본집단의 확률분포에 대해 가정을 하지 않고 표본집단의 통계적 특성을 이용하여 모집단의 통계적 추론을 할 수 있는 비모수적인 리샘플링 기법이다. 부트스트랩 추론은 표본집단의 추정치, 편의, 표준오차를 산정하고 신뢰구간을 추정한다. 부트스트랩 추론을 통해 산정하는 신뢰수준을 이용하여 농업용 저수지의 홍수 취약성을 산정하였다. 본 연구는 설계변수에 내재하는 불확실성을 부트스트랩 기법을 이용하여 정량화하고 확률적인 값을 가지는 홍수 취약성으로 산정하여 제시할 수 있다.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2002.05a
• /
• pp.43-49
• /
• 2002

본 연구는 첨단 신호 시스템 알고리즘의 최적해를 구하는 문제를 기호적 시뮬레이션 기법으로 해결하기 위한 방법론을 제시한다. 최근 지능형 교통 시스템의 일환으로 최적화 된 교통신호를 생성하기 위한 신호제어기법들이 많이 개발되었다. 하지만 이러한 신호제어기법은 복잡한 교통환경에서 신호제어 변수간의 다양한 상호작용의 모든 해를 제공할 수 없는 한계를 지닌다. 한편 기호적 시뮬레이션 기법은 발생 가능한 모든 사건과 시간관계를 자동 생성시킴으로써 동적으로 변화하는 다양한 교통환경에 대해서 신호제어 변수간의 모든 시간관계를 추론해 낼 수 있는 장점을 지닌다. 하지만 기호적 시뮬레이션을 이용한 모델링에 있어서 교통량과 같은 양적인 요소들의 기호적 표현에는 어려움이 따른다. 따라서 본 논문에서는 교통량과 같은 양적인 요소들을 시간에 따른 변화량으로 해석하여 첨단 신호 시스템 알고리즘의 최적해를 구하는 문제에 접근한다. 이를 위해 국내 첨단 신호 시스템을 대상으로 신호제어 전략에 필요한 양적 요소를 검토하고, 이러한 양적 요소를 시간에 따른 변화량으로 해석하여 모델링 하고, 기호적 시뮬레이션 실험을 수행하여 최적신호 제어 알고리즘을 생성한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.6
• /
• pp.539-544
• /
• 2013

This study provides a solution method for the inverse heat conduction problem based on a combination of a public domain CAE (computer aided engineering) software and a commercial CAO (computer aided optimization) software. The solver system has been implemented without any in-house coding. The proposed method is simple to implement. Moreover, it can be easily reproduced.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.764-767
• /
• 2011

본 논문에서는 유한요소법을 이용하여 임의의 단면을 가지는 빔의 비틀림 문제를 해석 할 수 있는 방법론을 제시하였다. 빔 유한요소에서 연속적인 뒤틀림함수를 얻기 위해 각 절점에서 뒤틀림자유도를 정의한 후 빔의 길이 방향으로 보간하였다. 이러한 방법의 사용은 뒤틀림구속효과와 비선형문제에 쉽게 접근 할 수 있게 한다. 또한, 임의의 단면에 대한 뒤틀림함수는 각 단면에서 St.Venant 방정식을 유한요소법을 통해 수치적으로 계산된다. 단면에서 계산된 해는 3차원 일반 빔 요소의 변위장에 매핑된다. 위와 같은 절차를 통해 개발된 빔 유한요소를 사용하면 임의의 단면을 가진 빔 구조물을 자유/구속 뒤틀림조건에서 비틀림, 굽힘, 신축 변형이 복합적으로 고려하여 해석해 낼 수 있다. 이렇게 해석된 결과를 검증하기 위하여 사각단면과 L단면에서의 결과 값을 고찰하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.4
• /
• pp.287-296
• /
• 1996

A mathematical model for the dynamic analysis of the riser system is developed to investigate the effect of internal flow on the free vibration of marine riser system which includes a steady flow inside the pipe. A semi-analytical method using series expansion is employed to derive Eigenvalue problem to facilitate the evaluation of the system frequencies, and its validity is given through the comparison of the solutions with the conventional method using system matrices. The algorithm is implemented to develop computer programs for the estimation of the system frequency. The investigations of the effect of internal flow on system frequency are performed according to the change of parameters such as top tension, internal flow velocity, and so on. It is found that the effect of internal flow can be controlled by the increase of top tension. However, careful consideration has to be given in the design point, particularly for the long riser.