• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.1-6
• /
• 2005

According to the development of the ships navigational equipment, a bridge system has been improved but a marine accidents by human error haven't been reduced Recently It's concerned about a suitable ergonomic arrangement and design of the ships bridge equipment to reduce an error for human factors. The bridge alarm system should be designed to recognize the alarm informations as soon as possible, to deliver it clearly. Internationally, there have been a lively discussion on the BAMS(Bridge Alarm Management System) for a ergonomic bridge design, but the practical design method have not been published. In this article I would like to review a ergonomic conceptual design for the ships bridge alarm system and propose a conceptual design of the Ergonomic Integrated Bridge Alarm Management System(EIBAMS)

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.75-80
• /
• 2005

Because there are only a limited number of means of action that are available for the master to pursue in the event of flooding, onboard decision support system has been required The majority of systems activated during a flooding emergency (such as watertight and semi-watertight doors, bulkhead valves, dewatering pumps etc.) almost exclusively aim to restore a sufficiently high level of subdivision to prevent flooding from spreading through the ship. Even though assuming the flooding scenario is not catastrophic, the use of ballast tanks can be an additional and very effective tool to ensure both prevention of flooding spreading and also improve ship stability. This paper describes an optimization algorithm devised to choose the set of ballast tanks that should be filled in order to achieve an optimal response to a flooding accident.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.431-436
• /
• 2003

It's about time we had to think an alternative to recover out insufficient fishery market caused by IMF locally as well as the fishery agreement on Japan and China. The Ministry of Maritime Affairs ＆ Fisheries have planning the advancing fishery information integrated system for the fishing present condition, marine resource administration and applicability consideration. The fishery information communication system is build up to the raw data ＆ process-network-content. The communication system must be small size, low cost and adapted SSB transceiver, that is using fishery shipping. In this paper We present digital data communication network to exchange information for fishery and safety between fishing ship and coast station in cheeper communication fee using SSB(single Side Band) in HF(High Frequency) band.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.267-269
• /
• 2009

This study investigated & analyzed the scheme for Ship Management for the Activation of world-wide Oil business. Shipping safety & marine pollution accidents occurred a huge property loss not only a shipping companies but also a oil companies, and marine accident may affect to a shipping company to go out of existence. On that score, oil companies have executed the evaluation by periods on each shipping companies and ships, and SIRE is inter-sharing by internet homepage on OCIMF & CDI, and its most important data when oil cargo transport. Therefore this study is provided a practical method to PIC of tanker shipping business & Designated Person, and it will be a basic of Ship Management for the activation of the Oil business.

• Journal of Navigation and Port Research
• /
• v.45 no.3
• /
• pp.87-94
• /
• 2021

The IMO has adopted emission standards that strictly restrict the use of bunker C oil for vessels. Accordingly, research and bunkering pilot projects for LNG fueled ships are being actively carried out, which is expected to substantially reduce environmental pollution. In this study, we have adopted the turret moored Floating LNG Bunkering Terminal (FLBT) designed to receive the LNG from LNGCs and to transfer LNG to LNG bunkering shuttles in ship to ship moored condition. Numerical simulations have been performed with a 1-year return period of wind, wave, and current. Damping values of numerical model were adjusted from the results of model tests to obtain accurate simulation results. The results confirm safe berthing operation during the 1-year return period of environmental condition. Safety depends on the direction of environment, with increasingly stable operation facilitated by the application of heading-control function of FLBT to avoid beam-sea conditions.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.494-500
• /
• 2020

Maneuvering vessels in the harbor is an interesting problem in marine cybernetics. The vessel, operated by the pilot and moving very slowly in shallow water, usually is assisted by thrusters, the main propulsion system, and tugboats. In this paper, we suggest a new vessel berthing technique using dampers (cylinder-type fenders) and a system of winches for complex and dangerous berthing situations. We found that control of the fender stroke and rope tension enabled a safe and quick berthing process. The effectiveness and usefulness of this berthing system was verified using a ship of about 2,000 tons.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.501-508
• /
• 2020

His paper looks more closely at the Republic of Korea's (ROK) Navy submarine berth-allocation strategies, with the study's results ultimately resulting in the proposition of an integer programming model. Current submarine berth-allocation planning problems include the need for more minimal berth-shifting and general support service failures, as a lack of efficient submarine berth-allocation often leads to submarines unable to receive the support service they need due to the inadequacy of their assigned berths. Currently, the ROK Navy allocates berths by only taking available reserve resources and the full-capacity limits of support services into account. This paper expands upon this strategy, and proposes a model which would allow for submarine berth allocation planning to also take submarine support service scheduling into account, allowing for more efficient and timely submarine servicing. This proposed model in turn minimizes berth shifting, support service failures, and allows for full coordination with the submarine support service request schedule. The construction of this model was carried out through data gathered on the ROK Navy's fleets and forces, allowing for a more nuanced analysis of existing issues with submarine berth-allocation planning.

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.344-350
• /
• 2022

Due to the increase in container cargo volume, the congestion of container terminals is increasing and the waiting time of gate in-out trucks has significantly lengthened at container yards and gates, resulting in severe inefficiency in gate in-out truck operations as well as port operations. To resolve this problem, the Busan Port Authority and terminal operator provide services such VBS, terminal congestion information, and expected operation processing time information. However, the visible effect remains insufficient, as it may differ from actual waiting time.. Thus, as basic data to resolve this problem, this study presents deep learning based average gate in-out truck waiting time prediction models, using container gate in-out information at Busan New Port. As a result of verifying the predictive rate through comparison with the actual average waiting time, it was confirmed that the proposed predictive models showed high predictive rate.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2020.11a
• /
• pp.165-166
• /
• 2020

Internationally, manufacturers attempted respectable portion of in-house logistics to satisfy end users and decrease manpower to compete for manufacturing price and quality optimization. Mostly, manufacturers operate variety of facilities such as collaborative robots, conveyor, etc. based on PLC. To achieve it, manufactures shall operate the optimized number of manufacturing processes with logic controlled by computer to reduce human errors. In prior to it, manufacturing industry still own plenty of fields which have not yet been adjusted with automation. For example, we shall put in-house logistics on the issue. This study focuses on manufacturing industry, evaluate efficiency, costs, etc. in all aspects and suggest alternatives by analysis SWAT and OEE, let alone reason of weakness.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.317-318
• /
• 2022

In accordance with global decarbonization, optimization and productivity improvement using digital twin are being sought, and software development for optimizing ship and marine energy operation is accelerating by selecting digital twin as a future core technology. In order to reduce the operating cost of ships and strengthen the competitiveness of the shipbuilding industry due to the international strengthening of regulations on carbon emissions, it is necessary to predict the carbon emission of ships in advance and provide a carbon reduction operation solution. A plan was carried out for the development of open digital platform technology and the establishment of an environment to support the securing of carbon transparency of the ship and offshore system.