• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.12
• /
• pp.1742-1747
• /
• 2015

An improved transfer alignment method for a strap-down inertial navigation system (SDINS) is presented here. The alignment accuracy in conventional method is vulnerable to the data latency of a Master INS (MINS) in high maneuverable platforms. We propose a time delay compensation equation considering higher-order terms in the attitude measurement equation of the Kalman filter. The equation incorporates additional information including angular rate, angular acceleration and linear acceleration from the MINS. Simulation results show that the transfer alignment accuracy is significantly improved in the high dynamic environment by incorporating the latency compensation technique.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.46-48
• /
• 2004

차량항법장치(Car Navigation System ： CNS)나 지리정보시스템(Geographic Information System ： CIS)에서 공간 객체를 효율적으로 다루는 색인기법에 대한 다양한 논의가 있어왔다 기존의 방법에서는 공간 객체의 인접성(cluster)과 밀집성 만을 고려해서 색인 트리를 생성하므로, 편향된 접근 빈도론 가진 공간 객체이 대해서 효과적인 탐색시간을 제공하지 못한다. 접근 빈도를 반영한 색인 기법은 공간 데이터가 갖는 특성-2개 이상의 차원에 대한 순서 할당이 불가능-에 의해서 지리적으로 인접된 객체들을 묶지 못하고, 이로 인해서 공간 객체에 대한 효율적인 색인 기법을 제공할 수 없다. 지리 데이터에 대한 위치와 접근 빈도가 주어질 매, 색인 트리는 좌표 정보뿐 아니라 공간 객체에 대한 접근 빈도도 고려해서 생성되어야 한다 본 논문에서 제안하는 기법을 전체 영역을 세부영역으로 분할하고, 각 세부 영역에 대해서 편향색인 트리를 생성한 뒤에 트리를 병합함으로써 밀집도와 접근 빈도를 반영한, 편향된(skewed) 색인 트리를 생성하도록 한다. 편향된 색인 트리는 접근 빈도가 높은 공간객체를 상위계층(level)에 위치시킴으로써 탐색비용을 줄인다.

• Annual Conference of KIPS
• /
• 2012.04a
• /
• pp.1018-1020
• /
• 2012

선박에서 값비싼 장비를 이용하지 않아도 현재 자신의 위치를 알고 싶을 때 스마트폰을 활용하여 자신의 위치를 확인할수 있다. 본 논문에서는 스마트폰에서 입력받은 GPS센서(GPS:Global Positioning System,위성항법장치)의 신호를 적용하여서 구글맵에 표시하여서 자신의 위치 및 경로를 알 수 있다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.122-128
• /
• 2019

This paper describe the method for maintaining initial azimuth of tactical grade IMU. The proposed method uses the zero velocity update (ZUPT) algorithm based on Kalman filter and the azimuth information previously obtained through transfer alignment. ZUPT technique can estimate and correct navigation attitude errors using the observed velocity error without the need of other sensors. Also, ZUPT combined pre-obtained azimuth information allows to maintain initial azimuth for tactical grade IMU. We verify the performance improvement of the proposed azimuth maintaining method by simulation and test.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.4
• /
• pp.110-115
• /
• 2018

This paper introduces Korea Airport Corporation's own research and development contents and plans for navigation aids check using drone which is actively research and developed mainly in advanced countries. The hardware, algorithm, operating program of the drone system, the drone flight trajectory setting, and real-time measurement results were analyzed and verified. By securing domestic technology for the latest technology utilizing drone, we plan to promote more thorough aviation safety and advanced technology in related field and commercialized it in domestic and overseas.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.2
• /
• pp.13-22
• /
• 1997

Strapdown inertial navigation system(SDINS) is a navigational instruments necessary to guide and con- trol a free vehicle. In this study, an error analysis of mechanical parts is carried out for manufacturing a dynamically tuned gyroscope. The errors usually come from the tolerance in machining and assembly. In the error analysis, a criterion to be considered during designing and manufacturing is proposed by quanti- tatively analyzing the effect of DTG performance by tolerances. The theory of dynamic balancing is deduced and unbalance is reduced through experiment.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.491-492
• /
• 2022

본 연구에서는 실내 공간 정보 획득을 위한 IMU/INS 항법장치에 관한 연구를 위한 선행연구를 수행 하였다. 최근의 GPS를 이용한 내비게이션의 경우 보통 5~10m의 위치 오차가 일어나지만 아파트나 대형시설과 같이 실내, 터널, 공장지대 및 산악 지대등 상당한 지역은 GPS의 사각지대 또는 오차 범위를 벗어난 지역으로 존재하고 있다. 따라서 GPS는 실내에서는 사용이 불가능 하므로 다른 방안이 제시되어야 한다. 현재 고속 연산을 위한 고성능 마이크로프로세서의 발전은 센서 분야에 적용되어 저 전력, 고 정밀, 소형의 IMU/INS, ARS/AHRS 센서가 개발되고 있다. 본 연구에서는 IMU(inertial measurement unit)와 INS(Inertial Navigation System)을 이용하여 IMU자체의 자이로 센서와 가속도 센서를 이용한 GPS의 위성신호가 감지되지 않는 지형에서도 속도의 적분값과 회전방향을 이용하여 위치인식이 가능하도록 정보를 계산하여 자기의 위치를 추적하는 방안을 연구하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.205-206
• /
• 2023

This paper presents a new method for indoor localization track workers in construction sites. While GPS and NTRIP are effective for outdoor positioning, they are less accurate when used indoors. To address this issue, the proposed method utilizes Aruco markers to measure the distance between workers and the markers. By collecting data values, the location of each worker can be determined in real-time with high accuracy. This approach has the potential to enhance work efficiency and safety at construction sites, as it provides more precise indoor positioning compared to conventional methods, leading to improved work efficiency.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1645-1653
• /
• 2014

In general, RGB, NIR, and thermal images are used for obtaining geospatial data. Such multiband images are collected via devices mounted on satellites or manned flights, but do not always meet users' expectations, due to issues associated with temporal resolution, costs, spatial resolution, and effects of clouds. We believe high-resolution, multiband images can be obtained at desired time points and intervals, by developing a payload suitable for a low-altitude, auto-piloted UAV. To achieve this, this study first established a low-cost, high-resolution multiband image collection system through developing a sensor and a payload, and collected geo-referencing data, as well as RGB, NIR and thermal images by using the system. We were able to obtain a 0.181m horizontal deviation and 0.203m vertical deviation, after analyzing the positional accuracy of points based on ortho mosaic images using the collected RGB images. Since this meets the required level of spatial accuracy that allows production of maps at a scale of 1:1,000~5,000 and also remote sensing over small areas, we successfully validated that the payload was highly utilizable.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.4
• /
• pp.8-15
• /
• 2011

This paper proposes a real-time navigation algorithm which integrates the artificial potential field (APF) for an unmanned vehicle in the unknown environment. This approach uses repulsive potential function around the obstacles to force the vehicle away and an attractive potential function around the goal to attract the vehicle. In this research, laser range finder is used as range sensor. An obstacle detected by the sensor creates repulsive vector. Differential global positioning system (DGPS) and digital compass are used to measure the current vehicle position and orientation. The measured vehicle position is also used to create attractive vector. This paper proposes a new concept of potential field based navigation which controls unmanned vehicle's speed and steering. The magnitude of repulsive force based on the proposed algorithm is designed not to be over the magnitude of attractive force while the magnitude is increased linearly as being closer to obstacle. Consequently, the vehicle experiences a generalized force toward the negative gradient of the total potential. This force drives the vehicle downhill towards its goal configuration until the vehicle reaches minimum potential and it stops. The effectiveness of the proposed APF for unmanned vehicle is verified through simulation and experiment.